Skip to content
OONO feature image

OONO

4.5 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, OONO has 139 products for sale. OONO products range in price from $10.99 to $98, and the average price of all the products is about $29.66.

We found that most of the OONO products are manufactured by CZH-LABS. The manufacturer provides OONO with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase OONO products from the seller Electronics-Salon.. The brand holds an average rating of 4.5, testifying to its excellent reputation.

Share

OONO Best Sellers

Last Updated: Jan 9, 2026

DC Power Fuse Distribution Strip Module (6 Position, DIN Rail Mount)

  • Working voltage DC 0 to 32V. Maximum total input current 30 Amps. 6 Channels output, each channel maximum output current 3 Amps (Factory-installed fuse value 3 Amps, you can replace the fuse to support up to 10 Amps.)
  • Input terminals pitch 7.62mm/0.3", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw. Support power supply expansion connect to other modules.
  • Output terminals pitch 5.0mm/0.197", wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw.

OONO Forward and Reverse Relay Module for Motor/Linear Actuator, Reversing Relay Module (DC 12V)

  • Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion
  • Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops.
  • Compact plastic case and wires connect for easy mount.

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

  • 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections.
  • Rated current 16 Amp(total input or output), Maximum voltage 48V
  • A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.

16Amp AC/DC 48V 2x12 Position Terminal Block Distribution Module. OONO D-1410GP

  • 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections.
  • Rated current 16 Amp(total input or output), Maximum voltage 48V.
  • A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.

OONO 30Amp 48V 2x6 Position Terminal Block Distribution Module

  • 30Amp 48V 2x6 position screw terminal block distribution module.
  • Rated current 30 Amp(total input or output), Maximum voltage 48V.
  • A / B terminal blocks, Pitch 7.62mm/0.3", Wire range 26AWG ~ 10AWG / 4.0mm square, rated current 30Amp. Strip length 8mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.

DC Power Distribution Module, Rocker Switch, Fused, Pluggable Top Wiring Terminal Block, DIN Rail and Screw Mount (4 Channel)

  • Operating voltage DC 5 to 32V. Total rated current 52 Amps. Paddle switch. Pluggable side wiring terminal block.
  • Input: Rated current 52 Amps. Dual input screw terminal block, the direction of the input terminal wiring can be flexibly selected, and it can also be extended to other modules as its input source. Pitch 10.16mm/0.4", wire range 20 - 6AWG / 10mm square, strip length 10mm, screw - metric M4.
  • Output: Maximum current 5 Amps for per channel (the factory-installed fuse is 5 amps. If the fuse is replaced, the maximum current can be up to 10 amps). Pluggable terminal block, pitch 5.08mm/0.2", wire range 28 - 12AWG / 2.5mm square, stripping length 7mm, screw - metric M2.5 slotted.

20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC

  • 20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC power jack. Support for multiple module extension connections.
  • Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp. Maximum voltage 48V DC or AC.
  • Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug.

AC 100-240V 3Amp Blinking Flasher Module

  • This is a simple and practical blinking flasher module, the ON and OFF duration can be adjusted separately. The blinking flasher module is suited for resistive and inductive loads : lightbulbs, wirewound transformers for halogen lighting... (Note: the module no rectification, voltage step-up or step-down function, not suitable for DC lamps). Load on-off control uses solid-state device instead of electromagnetic relays, so there is no need to worry about the life of on-off times.
  • Operating voltage AC 100 to 240V(47 to 63Hz). Maximum current: 3 Amp. Maximum load 350 Watts(at AC 115V), 700 Watts(at AC 230V).
  • Time-ON 0.1 to 15 seconds and Time-OFF 0.1 to 15 seconds adjustable. The output ON - OFF - ON – OFF… cycle alternates.

OONO DPST 1NO 1NC 8Amp Power Relay Module, AC 110V 115V 120V Control Voltage

  • Input control signal: Voltage AC 87~143V, Current 6mA.
  • Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch).
  • Compact plastic case and wires connects for easy mount. LED indication for relay action.

OONO DPST 1NO 1NC 8Amp Power Relay Module, AC/DC 12V Control Voltage

  • Input control signal: Voltage AC or DC 12V, Current 33mA.
  • Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch).
  • Compact plastic case and wires connects for easy mount. LED indication for relay action.

DC 4.5-30V 10A Dual Output Alternating Flasher Module

  • This is a simple and practical dual output alternating flasher module, the OUT-1 and the OUT-2 duration can be adjusted separately. The blinking flasher module is suited for both resistive and slightly inductive loads. This blinking flasher module is ideally suited for driving for example LED lamps, hazard lights, warning signs, safety beacons, light bulbs, etc ....
  • Operating voltage DC 4.5 to 30V. Maximum current: 10 Amp(each output). Maximum load 300 Watts(at DC 30V), 120 Watts(at DC 12V).
  • OUT-1 0.01 to 15 seconds and OUT2-2 0.01 to 15 seconds adjustable. The OUT1 – OUT2 – OUT1 – OUT2… cycle alternates output. (The time to adjust output 1 is also the OFF time of output 2. The time to adjust output 2 is also the OFF time of output 1)

OONO DPST 1NO 1NC 8Amp Power Relay Module, AC/DC 24V Control Voltage

  • Input control signal: Voltage AC or DC 24V, Current 17mA.
  • Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch).
  • Compact plastic case and wires connects for easy mount. LED indication for relay action.

AC120V On/Off Switching Electric Heating Relay with Built-in 24V Transformer, OONO F-1057

  • The F-1057 Electric Heating Relay is designed to control a AC 120V line voltage resistive load from a low voltage thermostat. The F-1057 relay has a built-in 24 V transformer and is compatible with 3-wire (R, C, W) thermostats as well as 2-wire (R, W) mechanical and battery-operated thermostats.
  • Replacement for any brand relay. Immediate relay activation provides improved temperature control and comfort. Easy to install, merely munted it on the side of existing junction box and attached the wires from the new thermostat.
  • LED indicator for relay action. On a call for heat, the relay is immediately activated, there is no delay.

DIN Rail Mount AC 120V NEMA 5-15R Single Receptacle Outlet Power Strip Module, with Rocker Switch Thermal Circuit Breaker Overload Protector

  • Outlet: 3-prong grounded NEMA 5-15R AC receptacle. Reinforced AC receptacle to ensure stability.
  • Working voltage AC 120V. Receptacle rated current 15 Amps.
  • Resettable rocker switch thermal circuit breaker overload protector current 15 Amps, built-in red indicator, support manually control output ON / OFF.

OONO AC120V 15Amp Automatic Transfer Switch, ATS Auto Transfer Switch (NEMA 5-15P/R)

  • OONO F-1051B Automatic transfer switch, an easy to mount 15Amp inline transfer relay provides switching between AC INPUT 2 (Utility or Shore Power) and AC INPUT 1 (Inverter or Generator) AC source. When AC INPUT 2 is powered, the load power will be switched to AC INPUT 2. When AC INPUT 2 is powered off, the load power will be switched to AC INPUT 1.
  • Operating voltage AC 90 to 135V 50/60Hz. Maximum current 15 Amp.
  • Transfer time less than 15mS(0.015 second). For most smart devices or computers, the switching action of 15mS time will not affect their normal operation.

16Amp 300V 15x2 Position Terminal Block Distribution Module. OONO D-1658GP

  • 16 Amp 300V 15x2 position screw terminal block distribution module.
  • Rated current 16 Amp(per pole), Maximum voltage 300V.
  • Screw terminal blocks, Pitch 5.0mm/0.197", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.

24V 50Amp Forward and Reverse Relay Module for Motor/Linear Actuator, Reversing Relay Module

  • Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion.
  • Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops.
  • High quality aluminum enclosure, thickness 1.5mm/0.06". Diameter M6 / 6mm threaded copper terminals for power supply and load. Connect switch terminal block: pitch 5.0mm/0.197", wire size 26~12 AWG / 2.5mm square, stripping length 7mm/0.28", Metric M2.5 slotted screw.

RS232 Breakout Tester LED Monitor, DB9 Male to Female Breakout Module

  • Connect in series with any RS-232 interface for testing a serial RS-232 data link. Simple and easy, no oscilloscope is needed. DIP switch can setting disconnect or reconnect any signal, and support external probe test signal from male or female position.
  • 8 double-color (red and green) LEDs indicate the logic states for respective data lines. Green for logic HIGH and red for logic LOW. Full RS232 spec compliant with LEDs for all 8 signals: DCD, RXD, TXD, DTR, DSR, RTS, CTS, RI.
  • No external power required. No driver required. Plug and play. Jack sockets(nuts) on the tester can be unscrewed easily(with metal shell held in place) if needed to mate with another connector that has jack sockets.

AC 100-240V 2A Dual Output Alternating Flasher Module

  • This is a simple and practical dual output alternating flasher module, the OUT-1 and the OUT-2 duration can be adjusted separately. The blinking flasher module is suited for both resistive and slightly inductive loads: lightbulbs, hazard lights, warning signs, safety beacons, wirewound transformers for halogen lighting... (Note: the module no rectification, voltage step-up or step-down function, not suitable for DC lamps)
  • Operating voltage AC 100 to 240V(47 to 63Hz). Maximum current: 2 Amp (each output). Maximum load 2x 230 Watts(at AC 115V), 2x 460 Watts(at AC 230V).
  • Output-1 0.1 to 15 seconds and Output-2 0.1 to 15 seconds adjustable. The OUT1 – OUT2 – OUT1 – OUT2… cycle alternates output. (The time to adjust output 1 is also the OFF time of output 2. The time to adjust output 2 is also the OFF time of output 1).

OONO 8 Channel Connector Power Splitter Distributor Source Strip, with 8 Independent Control Switch, Black

  • Operating voltage: 6 to 20VDC, No-load quiescent current: 2.7mA(at 13.8V).
  • Input port: maximum input current 40A, with a 40A fuse. Output port: 8 output ports, each port has an independent toggle switch and a power-on LED indicator, each port maximum output current 20A.
  • Voltage over(15.0V) and under(11.5V) LED indicators, and buzzer audio alarm for over voltage or under voltage. if you do not want to hear the alarm, you can open the aluminum case to remove the CN11 buzzer pin jumper.

OONO FAQs