BZ 3D

4.1 Fact checked

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, BZ 3D has 29 products for sale. BZ 3D products range in price from $8.98 to $28.98, and the average price of all the products is about $17.81. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase BZ 3D products from the seller BZ3D. The brand holds an average rating of 4.1, testifying to its excellent reputation.

BZ 3D Best Sellers

Last Updated: Jan 12, 2025

BZ 3D Ender 3 Dual Gear Extruder,Dual Drive Metal Extruder for Ender 3 V2/Pro/Ender 5/Plus/CR-6 SE/Ender 3 Neo/Max Neo/CR10/10S/CR10S Pro 3D Printer Extruder.(Motor Shaft>20mm)

Buy on Amazon Find on eBay

Dual-gear and dual-pneumatic joint extruder structure, high extrusion force, enhancing the feed strength , ensuring smooth feeding, better pressure pushes the filament into the printer, not easy to lose steps.

This all metal dual gear extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5, Ender 5 Pro,CR-6 SE,CR10 S series,Tornado 3D printer etc.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.

The Extruder Upgraded 1: This idler gear has metal washers on the bottom to prevent the extruder base from wearing out as quickly (prevents it from no longer lining up with the gears on the stepper motor).

Upgrade 2: This idler gear uses black half-threaded screws (to prevent premature wear of the bearings inside the gear) to increase the life of the extruder.

Please calibrate the E-steps from 100 to 139.Need to be assembled by itself. Note:For Mega/Vyper users,Please make sure to： Invert the stepper motor in firmware or by swapping stepper cables to changing the direction of rotation.

Read more Read less

BZ 3D New Upgrade MKS 3D Touch V2.0 Auto Leveling Sensor Auto Bed Leveling Sensor for 3D Printers CR-10/Ender 3/ Pro/ CR-10S/S4/S5 Improve Printing Precision

Buy on Amazon Find on eBay

Printing can also be achieved even though the platform is not flat.Instructions for use can refer to the following link: https://www.youtube.com/watch?v=4tmdXvN0K4U. If you need more detailed Marlin Settings, please contact me.BZ 3D is committed to providing you with the best service!

Printer TOUCH is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface.It can greatly improve the printing precision of your 3D Printer.

The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on.

NOTE: Pulling/pushing hardly on the push-pin may damage Touch sensor and make it less accurate.By using progressively designed solenoid and hall sensor, it can integrate high precision in such a simple structure.To make it more user-friendly and to bring you more enjoyable printing experience.

BZ 3D MKS 3D Touch Auto Leveling Sensor For 3D Printers Ender 3/ Ender 3 V2/Pro/ Ender 5/Ender 5 Pro/CR-10 /CR-10S/S4/S5 And Other Various FDM 3D printers.

Read more Read less

BZ 3D Ender 3 pro Belt tensioner Upgrade kit 2020 X-axis + 4040 Y-axis Belt Stretch Straighten Tensioner for Ender3 Pro/Ender 3 V2 3D Printer.(X2020+Y4040)

Buy on Amazon Find on eBay

Very useful upgrade parts for series printer, you can adjust the belt freedom, more better than original. Easier to adjust belt, higher precision and better printing effect. The X-axis and Y-axis belt can be adjusted at any time by turning the screw by hand.

High quality aluminum alloy material, Surface anodizing treatment.

Fine workmanship, wear-resistance and corrosion-resistance.Already assembled,you don't need to assemble it by yourself,just install and adjust the timing belt to use.

2020 X-axis belt tensioner+4040Y-axis belt tensioner Compatible with Ender 3 Pro/Ender3 V2 3D Printer.

After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service!

Read more Read less

BZ 3D GT2 Pulley 60 Teeth 8mm Bore Timing Belt Pulley 60T 8mm Bore Pulley Wheel for 6mm Width GT2 Timing Belt for 3D Printer,CNC (4pcs)

Mechanical Timing Pulleys

Buy on Amazon Find on eBay

GT2 60 Teeth 8mm Pulley,with Screw,Can be Fixed. It is made of high-quality aluminum material,which is lightweight has good strength and corrosion resistance,Longer Working Life.

Utilizing the standardized GT2 tooth profile and Excellently Machined,this enables GT2 pulleys to deliver stable performance in motion transmission and control.

60 Teeth 8mm Bore Aluminum GT2 Timing Belt Pulley for GT2 6mm Width Timing Belt, Easy to install.

Ideal for 3D Printers, CNC, Automation Device and other robotics with Timing Belt Pulley.

After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service!

Read more Read less

BZ 3D Ender 3 Springs Upgrade Kit,Metal Bed Leveling Nuts+ Hot Bed Springs for Ender 3/Pro/V2/Ender 5/Ender 3 Neo/V2 Neo/Ender 3 S1/S1 Pro/CR-10/10S.

Buy on Amazon Find on eBay

Aluminum Hand Twist Level Nut-Made by high quality aluminum,last much longer than plastic nuts.

The torque of these nuts is large, making it easier to fine tune the hot bed.Metal nut is more powerful and will twist more tightly than plastic nuts.

Hot bed Die Spring:The 3D printer spring made of spring steel is harder, more durable, has a longer service life and can be reused.(4PCS 25mm springs+4PCS 20mm springs) Suitable for different types of 3D printers.

Note:If you want to use 25mm spring on Ender 3, Ender 3 Pro and Ender 3 V2.you can use a tool to cut it to be shorter or adjust the hot bed to be higher to fit the springs.

Compatible:Ender 3/Pro/V2/Max/Ender 5/5 Plus/ 5 Pro/Ender 3 Neo/V2 Neo/Ender 3 Max Neo/Ender 3 S1/S1 Pro/S1 Plus/CR-10/10S/CR-10 V2/ V3/CR-10 Max/CR-10 Mini/CR 10S Pro/Pro V2/CR-10 Plus/CR-X/CR 20/CR-10 Smart Pro 3D Printer ect.

Read more Read less

BZ 3D Sprite Extruder/Pro Heater Block Upgrade Hotend Kit,Ender 3 S1 Bi-Metal Heatbreak,MK8 Hardened Steel Nozzle 0.4 for Ender 3 S1,Ender 3 S1 Pro,S1 Plus,CR10 Smart Pro,Sermoon V1,300℃

Buy on Amazon Find on eBay

The Hardened steel nozzle,each of which is molded by five axle CNC.Strict quality control enables it to possess Higher temperature,Higher Wear Resistance,Better Durability,More Precise. It is not only compatible with all regular 1.75mm filament such as PLA / ABS/ PETG/ TPU/ PP/ PC etc,but also perfectly compatible with special filaments,such as PEI,PEEK,PETG,Carbon Fiber Mixture,Glass Fiber Mixture, Filled PLA or Glow-in-the-dark filament.

If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament,special filaments then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles.We've developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the marke.

Upgrade Bi-Metal Heatbreak: Heat Insulation Good,Titanium alloy reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction,We use a special process to hold them firmly together. You don't need to worry about it being damaged.

The Ender 3 S1 Hotend is equipped with an upgraded Bi-Metal Heatbreak and Titanium Alloy Screws, providing excellent thermal insulation performance. It minimizes heat loss to the maximum extent, enhancing printing efficiency and reducing temperature fluctuations in the hotend. This results in a more stable and reliable hotend, reducing the occurrence of heat creep and improving print quality.

The NTC100K B3950 thermistor size of 3 x 5.5mm,Total length about 52mm, Made of high quality materials, ensuring superior stability, durability, and more accurate temperature measurement. Avoid problems during printing, provide users with a better printing experience.(The sensor is capable of measuring higher temperatures, Reaching up to 300°C.)

Read more Read less

BZ 3D 3M Black PTFE Tube,3D Printer Teflon Tubing ID1.9mm OD4mm for 1.75mm Filament for Ender 3 /V2/Pro/CR-10/ MK3/ MK3S/ Mega Series Hotend Bowden Extruder.（PTFE Black）

Buy on Amazon Find on eBay

Material: PTFE .High Quality Teflon Tube 1.75mm filament ID 1.9mm OD 4mm.Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.

We strive to choose better materials, slower production speeds, more accurate in-tube diameters. The operating temperature up to (260℃+）.

The smooth inner space will more effectively reduce the frictional resistance of the filament inside the tube.

PTFE tubing can be used in extreme temperatures and in harsh chemical environments.It's chemically inert, has low permeability, and has the lowest friction coefficient of any tubing.

Less retraction, more accurate prints, less slippage, wear, and tear on the extruder.

Read more Read less

BZ 3D 5M GT2 Timing Belt,Upgrade Non-Slip Version GT2 Timing Belt,6mm Width for Prusa i3,Ender 3,Ender 5,Ender 3 Neo,Ender 3 S1,CR-10,Anet A8,i3 Mega 3D Printer Timing Belt,CNC.

Buy on Amazon Find on eBay

Upgrade Anti-slip Version: The tooth surface of the GT2 Timing Belt is made of specially treated nylon tooth cloth, which minimizes the risk of belt slippage when the pulley is in contact with the belt.

Stable and Durable: The tooth form made of glass fiber reinforced rubber, which has very good durable and corrosion resistance and it will not stretch under normal tension.It is specially developed for 3D printers,can also be used as an accessories for any model building project.

Wear-Resistant: Thanks to the special red nylon tooth surface, the timing belt is particularly resistant to wear. This means a long belt life and the precise tooth profile provides excellent grip for efficient and quiet transmission.

Stable Transmission: High precision,High-strength structural design, anti-extension, anti-jumping,make the transmission more stable.

Dustproof: The back of the belt is made of neoprene, which can effectively protect the belt from dust, grease and moisture. This will be a durable accessories and practical accessories for your 3d printer.

Read more Read less

BZ 3D Vyper All Metal Hotend,Upgrade Bi-Metal Heatbreak,Heater Block Aluminum,Brass Nozzle 0.4mm for Vyper,Kobra Max,Kobra Plus 3D Printer for Volcano V5 J-Head Hotend.

Buy on Amazon Find on eBay

We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality brass nozzle (Tolerance 0.01 mm),Sleek Inner Wall,Smooth filament feed-out Less glitches Lower viscosity. Brass Nozzles High cost performance, Suitable for printing 1.75mm PLA ABS TPU PA and other conventional materials.

The Nozzle and Heatbreak appearance is more shiny,thread precision improvement.The inner wall of the tube is smoother (reducing the chance of filament clogging).The interface is smoother and more precise (can effectively prevent the filament from leaking).

The Vyper All Metal Hotend is equipped with an upgraded Bi-Metal Heatbreak,providing excellent thermal insulation performance,effectively reduces heat loss and improves printing efficiency and reducing temperature fluctuations in the hotend. This results in a more stable and reliable hotend, reducing the occurrence of heat creep and improving print quality.

The heatsink and heater block from high-quality aluminum, It is not inferior or cheap aluminum.This guarantees the overall performance of the product, coupled with high-precision CNC machining and stringent quality assurance, delivering users a high-quality All Metal Hotend.

Read more Read less

BZ 3D 10 X 200mm GT2 Timing Belt,6mm Width GT2 Closed Loop Belt,Upgrade Nylon Tooth Surface Non-Slip Version for 3D Printer,CNC.

Buy on Amazon Find on eBay

Upgrade GT2 Timing Belt Closed Loop Anti-slip Version: The tooth surface of the GT2 Timing Belt is made of specially treated nylon tooth cloth, which minimizes the risk of belt slippage when the pulley is in contact with the belt.

Stable and Durable: The Timing Belt tooth form made of glass fiber reinforced rubber, which has very good durable and corrosion resistance and it will not stretch under normal tension.It is specially developed for 3D printers,can also be used as an accessories for any model building project.

Wear-Resistant: Thanks to the special red nylon tooth surface, the timing belt is particularly resistant to wear. This means a long GT2 Timing Belt life and the precise tooth profile provides excellent grip for efficient and quiet transmission.

Stable Transmission: High precision,High-strength structural design, anti-extension, anti-jumping,make the transmission more stable.

Dustproof: The back of the Timing belt is made of neoprene, which can effectively protect the belt from dust, grease and moisture. This will be a durable accessories and practical accessories for your 3d printer.

Read more Read less

BZ 3D FAQs

Is BZ 3D Legit?

Yes, BZ 3D is a legitmate brand on Amazon. After conducting a comprehensive analysis of 682 customer reviews for BZ 3D products on Amazon, we have determined its average rating. Offering great value and satisfying quality, BZ 3D has achieved a respectable rating of 4.1 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from BZ 3D on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more BZ 3D products?

If you're interested in BZ 3D and want to find more BZ 3D products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type BZ 3D in the search box and hit Enter to see the search results.
Find and click the correct BZ 3D to go to the new page.
Select the products you want in the BZ 3D buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more BZ 3D products.

How does findthisbest choose the top BZ 3D products?

We analyze millions of BZ 3D products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase BZ 3D products via FindThisBest?

Go to the BZ 3D page.
Select the product you want in the BZ 3D buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product BZ 3D Ender 3 Dual Gear Extruder,Dual Drive Metal..., you can view it on Amazon page.
Place your order on Amazon.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the BZ 3D products, helping you make more informed buying decisions. We recommend best choices of the products from the BZ 3D brand, helping you make better shopping choices with less time and energy.

Similar Brands