JEYI feature image

JEYI

Review rating Review rating Review rating Review rating Review rating 4.5 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, JEYI has 53 products for sale. JEYI products range in price from $5.98 to $79, and the average price of all the products is about $30.76.

You can confidently purchase JEYI products from the seller JEYI Group. The brand holds an average rating of 4.5, testifying to its excellent reputation.

JEYI Best Sellers

Last Updated: Jan 12, 2025

JEYI 2230 Only M.2 Enclosure, Direct-Attached Wireless USB C 10Gbps M.2 NVMe SSD Enclosure Adapter, 2tb Max - i9 Zebra 2230C

This JEYI 2230 M.2 enclosure turns your NVME M.2 2230 solid state drive into a portable, high speed USB 3.2 Gen2 drive (10Gbps transmission speed, 1Gb file in 1 second). Obtain maximum performance by using an M.2 SSD in place of a platter drive, harnessing the full potential of your USB 3.2 computer system.
This NVMe M2 Adapter no need to use a data cable for connection; simply open our protective cover (with magnetic attraction), and you can connect to the device via the USB-C interface to access the data inside the NMVe hard drive. This design is very convenient, just like using a USB flash drive.
This JEYI 2230 M.2 to USB Enclosure adapter built in latest lower power consumption and more stable performance of the JMS583 A3 master chip, support TRIM command, to avoid the SSD master to erase these files when the remaining space is not enough, resulting in the master to perform the work of erase + write at the same time, the load is too large and therefore dropping speed.
The enclosure on the M.2 hard drive enclosure supports UASP, enabling you to achieve transfer speeds up to 100% faster than traditional USB 3.0 when used with a UASP-enabled host computer.The enclosure on the M.2 hard drive enclosure supports UASP, enabling you to achieve transfer speeds up to 100% faster than traditional USB 3.0 when used with a UASP-enabled host computer.
For further convenience, the 2230 M.2 SSD to USB 3.2 enclosure is USB-powered and requires no external power adapter. For wide compatibility with all the common M.2 solid state drives, the enclosure can mount ONLY 2230 NVME M.2 SSDs. Plus, the external SSD reader is compatible with any operating system, including Windows and Mac to ensure you can use it with any computer.
Built to last durable aluminum construction on the M2 NVME helps to ensure your drive won't be damaged while you're on the move. Plus, to maximize heat dissipation the portable hard drive enclosure features a specially engineered ventilation aluminum surface also free thermal compound pad to fill the gap of the enclosure and SSD chips which help maintain a cooler operating environment for optimal performance and a longer life span for your drive.
This slim, pocket-sized aluminum external enclosure has been specifically engineered for mobility. It features a lightweight yet durable design, which fits easily into your pocket or laptop bag.
Put the SSD in this Enclosure Adapter, you can easily file backup, disk upgrade, clone, data recovery, and storage expansion with your Mobile, game console, and laptops. And it is support Win to Go(WTG)

JEYI M2 M2PLUS NGFF NVME m. 2 Extended Transfer 2230, 2242, 2260, 2280 M2 Change Long Size NVME NGFF M.2 U.2 M3 M.3 SSD

100% brand new and high quality.
Made of high-quality metal material, durable, firm and stable for us to use.
Stable lead-free SMT fixing screw column, easy to install and remove.
It can support 2230 to 2242/2260/2280, 2242 to 2280, 2260 to 2280. It does not support 2242 to 2260.
It can be cut off, five lengths can be adjusted for you.

JEYI Copper M.2 HeatSink, Passive Nvme SSD Heatsinks with Copper Fins - Finscold Q80

Heavy-duty copper heat sink with 36 built-in copper fins, thermal conductivity 401 (W/m.K), surface area 20 times larger than ordinary M.2 heat sinks.
Full CNC cutting aluminum frame for good appearance and solid construction,
Equipped with 3 soft thermal pads to improve thermal conductivity and adjustable screw fixing holes to prevent the chip of SSD from being damaged
Perfect fit for M.2 2280mm SSD, especially for SAMSUNG PCIE 4.0 980Pro and EVO 970Pro Which has very high heat generation
Note: The height is 12mm/0.45" and supports mounting under the graphics card, But still please double check before you buy it "

JEYI M.2 HeatSink for PS5 / mATX/MiniATX, Mech-Inspired Ultra Slim 6mm Height Low Profile Aluminum Convective NVMe Heatsink, DazzCold-006

This JEYI M.2 SSD heatsink is special for PS5, mATX and MiniATX motherboards. The 6mm slim size is the same thickness as your cell phone and can fit in a variety of narrow areas without interfering with the operation and installation of PC peripherals.
This NVMe heatsink built to last durable aluminum construction on the M2 NVMe Heatsink helps to ensure your drive won't be damaged. Plus, to maximize heat dissipation the m.2 nvme ssd heatsink features a specially engineered ventilation aluminum surface which help maintain a cooler operating environment for optimal performance and a longer life span for your SSD.
CNC cutting aluminum heatsink main body for solid construction, notches on the surface for more efficient heat dissipation. And a multi-color anodized surface for a better aesthetic appearance.
Equipped with soft thermal pads to fill the gap of the heatsink and SSD chips to improve thermal conductivity. Adjustable screw fixing holes on the base frame to achieve the better contact to enhance cooling performance.
For 2280 M.2 SSD heatsink, especially for SAMSUNG PCIE 4.0 980Pro, 970Pro, SN850, TiPro7000, SPATIUM M480 PLAY, MP600, NM760, SN770, P5 Plus, NM800, KC3000, GM7000Which has very high heat generation

JEYI iArcticStorm 360 Water Cooler Black, Desktop ARGB AIO Liquid CPU Cooler, Intel & AMD TDP 280W, Infinity Mirror Efficient PWM-Controlled Pump, for AMD Ryzen AM5|4, Intel LGA 1851|1700 etc.

JEYI iArcticStorm 360 All-in-One Infinity Mirror CPU Cooler: Combines powerful, low-noise cooling pump which max thermal design power at 280W
JEYI High Performance Liquid Cooling Pump: The powerful JEYI pump operates at up to 2,300 RPM which Water Flow Rate at 300L/h in 16mm pipes to ensure efficient and quiet coolant circulation.
Larger Area Water Heat Sink Surface: The AIO cooler's larger, smoother area Micro Channel enhances heat transfer and improves overall cooling performance.
Daisy Chain 3-in-1 ARGB Coolin Fan: The ARGB fans boast powerful rotational speeds and a 3-in-1 fan cable for cleaner cable management within the chassis.
JEYI Water Colling System provide AMD and Intel mounting kits for a hassle-free installation. (for Intel:LGA2011/2011-V3.1700. 1851.115X.1200.2066) (AMD:AM5.AM4.AM3.FM1.FM2)

JEYI Q150 M.2 HeatSink, Cooper Fins with Aluminum Frame Passive Heat Sinks - Finscold Q150-1.7mm / 0.68"

Attention: this heatsink may affect the use of CPU heatsinks or graphics cards, the height is about 17mm, please check if there is enough space before purchasing
Heavy Duty Copper heatsink, built in 401 (W/m.K) thermal conductivity Full Copper fins to enhance the heat release rate
Full CNC cutting aluminum frame for good appearance and solid construction
Perfect fit for M.2 2280mm SSD, especially for SAMSUNG PCIE 4.0 980Pro and EVO 970Pro Which has very high heat generation
Come with thermal compund pad and tools for one-step installation

JEYI Dual NVMe PCIe 4.0 X8 Expansion Card, Supports 2 NVMe M.2 SSD 2280 up to 4TB, Raid Bandwidth 128Gbps, Bifurcation Required

Only support Bifurcation Motherboard otherwise only one drive will be read. Support high and low profile bracket cabinet
This adapter card uses 3.3V and 12V dual voltage power supply, 12V to 3.3V using dual 6A power modules to meet the power requirements of large power consumption SSD.
Supports 2 X NVMe M. 2 up to 128 Gbps in one card by utilizing PCIe 4. 0 bandwidth. Support 2242/ 22608/ 22110.
NVMe soft RAID is supported base on the motherboard chipsets
For more information please see the PRODUCTS DESCRIPTION

JEYI 13th Gen CPU Bending Corrector Frame, Socket LGA1700 Bending Corrector Buckle for Alder Lake CPUs - LGA1700-BCF

This JEYI CPU bending corrector frame is to solve the problem of 12th/ 13th Gen Alder Lake/ Raptor Lake CPUs were prone to bending while placed on the LGA 1700 socket
The LGA1700 bracket allows the chip to maintain its shape, connecting connector pins with the motherboard in a right position.
The benefit of JEYI's LGA1700 bracket is that users will be able to utilize their expensive Intel Alder Lake CPU for much longer. Solving problem due to bending such as temperatures spiking to abnormal levels or poor connection of internal components
The bottom has insulating pads to ensure that the CPU or motherboard will not crash due to a short circuit, so you can safely install this lightweight aluminum frame on the 12th/ 13th Gen CPU
The package comes with tool, 8.0W/mk thermal compound pad, 8.0W/mk thermal Paste

JEYI RGB NVMe M.2 SSD to PCIe X16/X8/X4 Adapter Card with Aluminum Heat Sink (No RGB)

RGB option available
High-end aluminum for heat dissipation
1.5G per second transfer speed
Compatible Sizes: 2230 / 2242 / 2260 / 2280. NOTE: It will not fit the PCIe x1 slot
Screws & screwdriver included
SSD Bus interface: M.2 NVMe (not compatible with SATA M.2 SSD)
SSD form factor: M.2 M-Key (Not compatible with B-Key SSD)
PCI Express Physical interface: PCIe x16/x8/x4 slot. Logical Interface / PCIe Lanes: X4

JEYI PCI-E 4.0 Riser Cable, PCIe 4.0 16x 200mm High Speed Flexible GPU Riser Cable, EMI Shielded 30 AWG, 25Gbps Transfer Rate, Compatible with 5.0/4.0/3.0 (200MM)

16 GT/s Raw Transfer Rate Dual Channel: Compatible with RTX 4090, RTX 4080, RTX 4070 Super, RX 7900 XTX, RX 7900 XT, and RX 7900 GRE GPUs
Effortless Cable Management: Advanced ultra-flexible cable technology with a 200mm flat, foldable design for optimal cable management
15mm Screw Fixing Holes: Elliptical slotted screw holes (15mm) enlarge the fixing area, enhancing compatibility with mainstream GPU vertical brackets
High-Speed with 16x Slot: Install into a 16x PCIe slot on the motherboard for maximum transmission speed. Ensure the computer is powered off during installation to avoid GPU damage
Gold-Plated Pins: Gold-plated PCI pins enhance durability and ensure a retention force of 400g per contact pair. The 90-degree angled connector offers stable transmission and easy installation

JEYI PCIe 4.0 x4 Adapter for NGSFF NF1 M.3 NVMe 110mm SSD - PCI Express 4.0 4-Lane Host Adapter

PCIe 4.0 x4 lane adapter card for M.3 NGSFF NF1 NVMe 110mm SSD which support works in the motherboard PCIe x4 bus slot
Supports 12V M.3 NGSFF NF1 NVMe SSDs. note: it does not work with 3.3V M.2 NVMe SSDs.
Regular size bracket and Low Profile bracket included
No driver installation is required. If your computer supports M.2 drives then support this M.3 drive
1x M.3 NGSFF type 30110 M Key socket for M.3 NGSFF NF1 NVMe SSD

JEYI 100 Pieces Pre-Cut 0.6 x 0.6 Inch (15x15mm) Silicone Thermal Pad 0.2 0.4 1.0 1.5mm Thickness Reusable Thermal Conductive Silicone Pad for SSD GPU CPU or Any PCB (Assorted Colors & Thickness)

Save your time - Pre-cut and ready for you out of the box
Precision cooling - Conduct heat exactly where you need
Variety - Multiple colors and thicknesses, thermal pads can be cool!

GaN Thunderbolt 3 Dock, JEYI 8-in-1 Dual Thunderbolt 3 Docking Station with NVMe M.2 Expansion, 8K DP,60W PD, USB-A 10Gbps - ThunderDock 7 Ultra

Most Useful Function: Built-in 20V/5A 100W GaN PD charger can provide 60W and 15W PD output, charging for external laptops, phones, pad etc. No need for a huge power adapter on the working space anymore, the ThunderDock 7 Ultra use one power cable to solve messy desktop wiring.
Extra SSD Capacity: Built-in M.2 interface, expandable with one PCIe 3.0 x4 M.2 NVMe SSD (supports up to 2TB hard drives in 2280 size only) with maximum speed support of 2500Mb/s (depending on Thunderbolt channel occupancy). Designed with a magnetic Tool-Free NVMe E for easy installation and removal.
Dual Extra Display: Greatly expanded working area with the Thunderbolt 3 port supports upto 5K@60Hz and the Displayport 1.4 which support 8K@60Hz. Connect to both simultaneously to enjoy crystal-clear streaming or mirroring across 2 displays in 4K@60Hz.
Daisy Chain:Daisy-chaining means that one device can plug into the end of a string of devices, one after the other. JEYI Thunderbolt 7 Ultra provide DUAL THUNDERBOLT 3 PORT, could connect up to 6 Thunderbolt 3 devices in a chain.
Unbeatable adaptability: Comes with a 10cm Thunderbolt 3 flat cable and 50cm Thunderbolt 3 cable, supports connection to Mac OS and Windows with Thunderbolt 3 ports or USB 3.2 Gen2(USB 3.1 Gen2)attached ( M.2 slot will not work in USB mode).

JEYI iHyper-Pro M.2 X16 to 4X PCIE 4.0 GEN4 Expansion Card Supports NVMe M.2 m Key 2280 up to 32Gbps for VROC NVMe Raid (iHyper-Pro)

New upgrade, support PCIE 4.0 GEN4, backward compatible with PCIE 3.0 GEN3.NVME four-disk design, stable installation, can run 4 NVME disks at full speed at the same time.
Supports 2U server small chassis installation; built-in multiple sets of high-power DC modules for sustainable and stable work.
Support 4-disk soft RAID, soft RAID can be realized under WIN10 system, four-disk consistency is good, RAID operation is stable.
Thicken the PCB board to protect the hard disk from deformation.
Integrated JEYI high-speed signal enhancement technology to ensure the stability and security of big data processing, can be widely used in data acquisition, data mining, image processing, video Processing, cloud computing and other fields.

JEYI i9 GTR NVME Aluminium TYPEC3.1 Mobile HDD Box Optimal HDD Enclosure SSD Housing Type C3.1 RTL9210b M. 2 USB3.1 M.2 PCIE SSD U.2 PCI-E (Support 2242-2280)

Aluminum CNC carved in creating solid heat dissipation is good with stable and durable RTL9210b higher-order master built-in large capacity ROM can customize the firmware and the standby time.
JEYI I9-GTR adopt harden alloy aluminum and more than 20 procedures?such as CNC carved and polished,Sandblasted anode etc .Provide you with the best quality hard drive enclosure.
JEYI use screws and positioning stud to fix PCB. It will avoid PCB loose result in poor contact when plugging and unplugging.So that make the product more durable,your data safer and avoid reducing the heat transfer efficiency of the thermal silicon wafer due to PCB looseness.
JEYI USB 3.1 GEN 2 TYPE-C is designed full speed 10 Gbps.
I9-GTR adopt RTL9210b 40mm Process master control and support RCIE ASPM power saving management.ASPM power saving management is a power link management scheme supported on Windows systems, trying to adopt power saving mode when the device (PCI Express) is idle.

JEYI iHyper M.2 PCIE4.0 X16 to 4X NVME Adapter Card PCIE4.0 GEN4 X16 to 4X NVME RAID Card PCI-E VROC Card

Supports NVMe M.2 m Key 2280, support PCIE 4.0 GEN4, backward compatible with PCIE 3.0 GEN3.NVME four-disk design, stable installation, can run 4 NVME disks at full speed at the same time.
Supports 2U server small chassis installation; built-in multiple sets of high-power DC modules for sustainable and stable work.
Support 4-disk soft RAID, soft RAID can be realized under WIN10 system, four-disk consistency is good, RAID operation is stable.
Support:?Only supports motherboards with detachable PCIE channels
Integrated JEYI high-speed signal enhancement technology to ensure the stability and security of big data processing, can be widely used in data acquisition, data mining, image processing, video Processing, cloud computing and other fields.

JEYI U.2 SSD to PCIe X16 3.0 Adapter SFF-8639 PCIe Adapter PCIe NVMe SSD Adapter with U.2 Port for 2.5" U.2 NVMe SSD SATA SSD Intel U.2 SSD Samsung PM953

Integrated JEYI high-speed signal enhancement technology, fully suppress EMI, guarantee signal integrity, has passed the signal integrity test.
Support dual interface protocol, support U.2 SSD and SATA SSD
SFF-8639 U.2 high-speed transmission protocol, PCIE3.0 X16 GEN 3 design, guarantee full-speed transmission from the bottom of the technology.
Precise and solid structure, precise PCB, hollow design, strong heat dissipation.
5A high-power DC TO DC power supply module, integrated high-power inductor. In the era of big data, stability is the foundation.

JEYI FAQs

Yes, JEYI is a legitmate brand on Amazon. After conducting a comprehensive analysis of 811 customer reviews for JEYI products on Amazon, we have determined its average rating. Offering great value and satisfying quality, JEYI has achieved a respectable rating of 4.5 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from JEYI on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in JEYI and want to find more JEYI products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type JEYI in the search box and hit Enter to see the search results.
  3. Find and click the correct JEYI to go to the new page.
  4. Select the products you want in the JEYI buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more JEYI products.

We analyze millions of JEYI products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 53 JEYI products for sale, 17 of which were analyzed in detail and recommended to customers.

  1. Go to the JEYI page.
  2. Select the product you want in the JEYI buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product JEYI 2230 Only M.2 Enclosure, Direct-Attached Wire..., you can view it on Amazon page.
  3. Place your order on Amazon.

Our mission is to provide you with the most up-to-date and objective information about the JEYI products, helping you make more informed buying decisions. We recommend best choices of the products from the JEYI brand, helping you make better shopping choices with less time and energy.