Skip to content
ChowThink feature image

ChowThink

4.3 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, ChowThink has 15 products for sale. ChowThink products range in price from $16.99 to $69.99, and the average price of all the products is about $29.52.

You can confidently purchase ChowThink products from the seller ChowThink. The brand holds an average rating of 4.3, testifying to its excellent reputation.

Share

ChowThink Best Sellers

Last Updated: Jan 12, 2025

X-axis MGN12H Linear Guide Rail Kit 3.0 for Ender3 S1/S1 pro 3D Printer Upgrade Include All Accessories from ChowThink

  • Notice:This kit was specifically designed and developed for Creality Ender 3 S1/S1 pro 3D printer,not suitable for other models,with a full set of installation accessories and tools,please feel free to contact us if you have any questions.
  • [Improve the quality of fast printing] Make the movement more stable, accurate, agile, longer service life, more suitable for fast printing, higher load .
  • [2020 profile for guide rail] The 2020 profile, customized for the MGN12H linear rail, offers better accuracy and installation rationality than mounting through various support plates. The mounting position and dimensions are designed for the Ender3 S1/S1 pro.

SFU1204 Ball Screw for Ender3 S1 pro 3D Prinrter Upgrade Double Z-axis with Metal Deflector Ball Screw Nut and Corresponding CNC Machining Accessories from ChowThink

  • [SFU1204-390mm Ball Screw kit] 2Pcs Ballscrew SFU1204-390mm with ball nut+Decoupling device+Special CNC machining screw seat+Special CNC machining motor support+Accessories for Ender3 S1/S1 pro dual Z-axis Upgrade.This kit is compatible with the ChowThink linear rail kit.
  • [Higher Precision&Smooth Running] The trapezoidal screw belongs to sliding friction, but the ball screw is rolling friction, Through the movement of the ball, the heat is less and the precision is high,The efficiency is 2-4 times than the trapezoidal screw,which can make the Z-axis screw run more smoothly, which can make your printer capable of printing with higher precision.
  • [HIGH-QUALITY Material&Accessories] Ball screw is precision machined from high strength steel, and equipped with special customized CNC machining screw seat/motor support/decoupling device,so that it has higher precision and stronger load capacity.

Hotend and Direct Drive Extruder Upgrade Ribbon Cable and PCB Adapter Board for Ender3,Ender 3 pro,Ender 3 V2,Ender 3 neo,Ender5,CR-10 3D Printer

  • [Wide Compatibility] :This kit is suitable for Creality Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 neo, Ender 3 V2 neo, Ender 5, Ender 5 Pro, CR 10 series, and CR-20 series 3D Printers that have already been upgraded with direct extruders. The kit comes with a CR-touch and extruder line, and does not require any additional accessories.
  • The adapter board and ribbon cable specially developed for 3D printer integrate various wires into one, making the wiring harness no longer messy and avoiding the impact of messy wiring harnesses on printing.
  • Convenient: By using this adapter board, it is easy to replace and upgrade other accessories on the hot end without having to tidy up the wiring harness, open the motherboard cover, etc

ChowThink Dual Z-axis V2.0 Synchronous Wheels Kit for Ender 3 pro,Ender 3 V2,Ender 3 neo, Ender 3 pro,Ender 3 V2 neo 3D Printer Upgrade Accessories

  • [Note] This kit is specially designed and made for Ender 3,Ender 3 pro,Ender 3 V2,Ender 3 neo,Ender 3 V2 neo,with higher adaptability. Not applicable: Ender3 S1, Ender3 V3 series, please be informed!
  • [3D Printer Custom Kit] Custom 25 teeth, 28mm diameter synchronous wheel and 10mm wide synchronous belt, with greater tooth depth, better anti-slip, synchronization.Ideal for 3D printer Z-axis use.
  • [High Quality Aluminum wheel] Gear made of all aluminum alloy with anodized red and black two colors surface for a more personalized appearance and longer service life.

High Temperature Resistant Premium Bowden Tubing 6M TPFE Teflon Tube for 1.75mm Filament with Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings,Teflon Cutter,Collet Clips and Spanner for Ender 3/3 Pro

  • [Lower Friction] 6 pcs 1 meters Teflon Tube, Bowden PTFE tubing withhe lowest friction tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder
  • [Copper nickel plated Connector] 8 * PC4-M6 and 8*PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend.
  • [High Temperature Resistant] It use for 1.75mm filament with an extremely precise internal diameterHigh Temperature Resistance due to using only the highest quality PTFE. Our tubing kit will operate at even higher temperatures ,The maximum operating temperature up to 280℃!

ChowThink 3PCS 235 * 235MM Double-Sided PEI+PET,PEI+PEO,PEI+PEY Magnetic Spring Steel Flexible Platform for Ender3/Ender3 pro/Ender3 V2/Ender3 S1/Ender3 neo/Ender3 V3/Ender3 V3 KE/Ender3 V3 SE/K1/K1C

  • [All in One] A kit includes all four types of flexible steel plate surface materials, PEI, PET, PEO, and PEY, allowing you to experience the different feelings brought by various platform materials. At the same time, various practicality and personalized appearances allow you to switch freely, full of freshness.
  • [PEI+PET Double Sided Printing] Double-sided PET+PEI spring steel plate , one side is a smooth carbon fiber patterned film,can print PLA and TPU and PETG. The other side is black PEI textured surface,the unique frosted texture, with strong adhesion, can adapt to print most filaments like PLA/ABS/PETG/TPU/Nylon.
  • [PEI+PEO Double Sided Printing] Double-sided PEO+PEI spring steel plate , one side is a smooth one side is smooth diamond patterned film,can print PLA and TPU and PETG. The other side is black PEI textured surface,the unique frosted texture, with strong adhesion, can adapt to print most filaments like PLA/ABS/PETG/TPU/Nylon.

Black-Box V2.0 All Metal Direct Drive Feeding Extruder Kit Upgrade, Dual Gear Extruder and Extrusion Specific Motor for Ender 3/Ender 3 V2/Ender 3 neo/Ender 5/CR 10 3D Printers from ChowThink

  • [Stable high-speed printing] Dual-gear direct extruder supports stable, smooth and precise filament feeding. By reduction ratio 5:1 , Torque amplification delivering 60N strong extrusion force let the filament smoothly fed in under long-term high-speed (Supports a maximum printing speed of 1000mm/s) printing conditions , and large extrusion force prevents clogging.
  • [All metal Extruder and Precise Rotation Motor] All metal CNC Machining body, metal reduction gear, hardened steel extrusion dual gear, metal handle, two metal knob nut,good texture, good durability.Precise stepper motor perfectly fits with gear,small lightweight motor with low noise and has large torque and high precision without losing steps,cooperate with the all metal body efficient heat dissipation.
  • [Printing of Various Filaments] Better effect for TPU, PETG, PC, PEEK, PLA, ABS, carbon fiber, nylon, and other materials.Stable and smooth discharge.

Sprite Extruder Upgrade Hotend 300°C High Temperature and 600mm/s High-Speed Printing 60W Ceramic Heater Block Kit for Ender3 S1/S1 Pro,CR-10 Smart pro 3D Printer from ChowThink

  • NOTICE:After installing all components and before re leveling, please change the Z-off value to 0 before entering the leveling program, otherwise it may cause the nozzle to collide with the hot bed. Because the distance between the new nozzle and CT touch probe is different from the original distance.
  • [Ender3 S1/Sprite Pro extruder specific] A high-temperature resistant, high flow printing hot end kit designed specifically for Sprite Pro Extruder. Adopting the same hot end design as K1, it supports high temperature printing up to 300 ℃ and a printing speed of 600mm/s. The kit includes corresponding accessories for upgrading Sprite Pro Extruder, which is easy to install and use.
  • [High-speed Printing up to 600mm/s] The length of the melting section has increased by 50% compared to the original hot end of the Sprite Pro Extruder, reaching 28.5mm, with a maximum flow rate of 32mm ³/s, supporting a printing speed of 600mm/s. Suggest setting the printing speed to 200% or above after upgrading.

ChowThink Armour 3.0 300°C High Temperature and High Flow 600mm/s High-Speed Printing Hot End Set with 3 Fans Upgrade for Ender 3/Ender 3 V2/Ender 3 pro/Ender 3 neo

  • Version Description: This SKU is a high flow version. Due to the extended melting zone, it is suitable for printing speeds of 200-600mm/s. If the speed is lower than 200mm, the pullback effect will deteriorate and the wire drawing phenomenon will worsen. So for speeds below 200mm/s, it is recommended to purchase the standard flow version.
  • [High-speed Printing up to 600mm/s] :K1 same hotend,the length of the melting section has increased by 50% compared to the original hot end of the Sprite Pro Extruder, reaching 28.5mm, with a maximum flow rate of 32mm ³/s, supporting a printing speed of 600mm/s.
  • [High Temperature Resistance up to 300°C] : The copper-aluminum bimetallic heatbreak make printing temperature up to 300℃,the temperature measurement of the thermistor reaches 300℃.Making it compatible with a wide range of filaments including PLA, ABS, PETG, TPU, PP, PC, nylon, and more.

Armour V2.5 All-in-one Integration All Metal Hot End Set with Full Accessories for Ender3,Ender3 pro,Ender3 V2, Ender 3 neo 3D Printer Upgrade from Chowthink

  • [Super heat dissipation,Up to 300 ℃ Printing] 1.The heat transferred from the throat will be transferred to 5 directions, greatly reducing the throat heat 2. All-metal design integrated radiator greatly increases the heat conduction volume and heat dissipation area, while reducing the overall weight and volume.
  • [Fast printing] Using a red copper heating block, combined with a 60W fast heating rod and cloning nozzle(E3D type, strong compatibility), can greatly accelerate the discharge speed, suitable for fast printing.
  • [Four fan design] One heatbreak cooling fan and three model cooling fans can bring violent cooling ability, suitable for fast printing and high-temperature material printing.

ChowThink Armour2.0/2.5 Hotend Specialized Accessories Include Throat and Ceramic Heating Block, Thermistor

  • This accessories include Throat and Ceramic Heating block, Thermistor is specifically designed for Armor 2.0, 2.5 maintenance and updates
  • NOTICE:This accessory is a specialized accessory and is not suitable for other models and hot ends

ChowThink Metal 3010(30x30x10mm) Fan DC 24V Extruder Hotend Double Ball Bearing Fan for Voron, Kobra,Neptune,DIY 3D Printer Upgrade

  • [Two-color metal oxide shell] The casing of the fan is made of metal, and it is oxidized in two colors,nice for 3D Printer Upgrades.
  • [Double ball motor] The fan of the motor adopts double ball motor, the speed is 9500 rpm, the resistance is smaller, the speed is faster and the air volume is larger.Service life 60000 hours.
  • [Fan parameter] Operation Voltage: DC 24V Size:30*30*10mm RPM:9500 Noise:27.75 DBA CFM:4.03

24V 5W 3D Printer LED Light Upgrade Kit 3-caps All Metal Body Adjustable Direction with Voltage Stabilizer for Ender3 V2, Ender3 Pro, Ender3,Ender3 neo,Ender 3 Max, Ender 5,CR6SE, CR10 from ChowThink

  • [No Dead End Lighting] This lamp is equipped with 3 lighting caps, two of which are fixed, one is equipped with a 20cm long metal hose, and the direction can be adjusted at will, so that there is no dead corner lighting.
  • [All Metal Body] The all-metal housing and copper-based lamp beads bring better heat dissipation effect, compared with the silicone led bar, can greatly extend the life of the lamp beads, reduce the speed of light attenuation.
  • [Voltage Stabilizer and Switch] The lamp holder is equipped with a voltage regulator, which can further stabilize the light intensity and extend the life of the lamp bead. At the same time, this version adds a mechanical switch according to the requirements of users.

ChowThink Lava Ceramic Heating Block Kit Support 300°C High Temperature Printing with Nozzle Upgrade for Ender3/Ender5/CR10 etc. 3D Printer

  • [60W Ceramic Heating Ring] 60W 360°C surround ceramic heating ring, this heater block enhanced heating efficiency, uniform heating, and rapid heat transfer, reaching 200°C in just 30 seconds.
  • [300°C Sensor] NTC thermistor, resistance 100K, B value 3950.Capable of measuring high temperatures up to 300 degrees Celsius.
  • Material: High precision machining Copper black nickel plating. High temperature resistance, smooth surface, Copper has more than 3x the thermal conductivity of brass.

ChowThink Bimetallic Integrated Quick-Swap Nozzle with 60W Ceramic Heating Block High Temperature High Flow Gale Hotend kit for Voron/Prusa DIY 3D Printer

  • [High-speed Printing up to 600mm/s] The 28.5mm length of the melting section with a maximum flow rate of 32mm ³/s, supporting a printing speed of 600mm/s.
  • [One-Piece Integrated Nozzle] The copper-titanium alloy-Hardened Steel integrated nozzle make printing temperature up to 300℃,long term printing without material leakage, while reducing the risk of material blockage.Making it compatible with a wide range of filaments including PLA, ABS, PETG, TPU, PP, PC, nylon, and more.
  • [Ultra large all copper heat sink] Pure copper has a thermal conductivity of up to 401W/m · K. Using ultra large pure copper, the heat dissipation efficiency is doubled compared to other aluminum alloy heat sinks, ensuring perfect adaptation to high-temperature material printing.

ChowThink FAQs