Skip to content
ITECH feature image

ITECH

4.1 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, ITECH has 105 products for sale. ITECH products range in price from $15 to $2304.02, and the average price of all the products is about $757.34. You should take everyting into consideration before buying the products, after all, it is not a small expenditure for most consumers.

We found that most of the ITECH products are manufactured by ITECH ELECTRONIC CO., LTD.. The manufacturer provides ITECH with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase ITECH products from the seller ITECH Electronics. The brand holds an average rating of 4.1, testifying to its excellent reputation.

Share

ITECH Best Sellers

Last Updated: Jan 12, 2025

ITECH AC Power Supply 300V/3A/300VA Programmable Bench Adjustable Single-Phase AC Power Source with Linear Amplification Technology Variable Frequency IT7321

  • Programmable AC Power Source: Low range: 0~150V/0~3A/0~300VA, High range: 0~300V/0~1.5A/0~300VA; 0.1V/0.1mA Resolution; 45HZ-500HZ Frequency; 0-360° Phase Angle. If you don't know what model is right for you, please contact us for professional advice.
  • Linear Amplification Technology: The advanced and high-precision linear amplification design can provide low noise and high stability output. This technology has high-speed response characteristics. It can simulate the abnormal power line, instantaneous voltage rise, drop and power off, and can be applied to ATE and so on
  • Test Function & Simulation Function: Inrush Current Testing; TRIAC Dimmer Dimming / Governor Simulation; Power Perturbation (PLD) Simulation; Surge, Trap Waveform Simulation; Voltage Dip, Short Interruption and Voltage Change Simulation

ITECH IT6302 Triple Output Power Supply 30V/3A/90W, 30V/3A/90W, 5V/3A/15W Programmable DC Bench Power Suppy 3 Independent and Isolated Outputs

  • [ Triple Output Power Supply ] CH1&CH2: 0~30V/0~3A/0~90W; CH3: 0~5V/0~3A/0~15W; Setup / Readback Resolution: 10mV/1mA
  • [ 3 Isolated Outputs ] Each output of the dc power supply can be turned on/off, set and run independently from the other channels.
  • [ List Function ] You can edit a test program consisting of multiple steps, set the voltage value, current value, and delay time for each step. (This function needs a RS232/USB communication module accessory)

ITECH Variable DC Power Supply 60V/5A/100W Adjustable Lab Bench Power Supply Coarse and Fine Adjustments CC & CV Mode IT6720

  • [Digital-control DC Power Supply] Output Voltage: 0~60V, Output Current: 0~5A, Power: 0~100W, Resolution: 0.01V/0.001A, Accuracy:
  • [CC/CV Automatic Conversion] The dc power supply features automatic switching between constant voltage and constant current modes. With this function, the bench power supply can operate uninterruptedly during transitions from constant voltage mode to constant current mode that occur with changes in load.
  • [High Reliability Protection] The lab power supply is equipped with OCP/OVP/OTP protection function. These protection functions ensure safety during testing and extend the life of the equipment.

ITECH 80V/60A/800W Programmable DC Power Supply High-Power IT6502D

  • [High-power DC Power Supply] 0~80V / 0~60A / 0~800W; Resolution: 1mV/1mA. High accuracy and high resolution, Low ripple and low noise. You can switch the display between setting value and actual value.
  • [Master/Slave Mode] Connecting multiple lab power supply in parallel or in series can increase the overall current output or voltage output respectively.
  • [Remote Sense Function] Remote sense can adjusted the output voltage of the device under test. This feature allows to compensate the voltage drop on the wire between the front panel terminals of the power supply and the device under test. This function can improve test accuracy, ideal for electronics R&D.

ITECH 150V/10A/600W Wide-Range DC Programmable Power Supply Variable Lab Power Supply Switching Regulated IT6953A

  • [Lab DC Power Supply] 0~150V / 0~10A / 0~600W; Resolution: 1mV/1mA. High accuracy and high resolution, Low ripple and low noise.
  • [List Function] you can set single-step voltage, current, and delay time, specifying the number of repetitions. The power supply will execute it upon receiving a trigger signal. This feature streamlines testing procedures and enhances work efficiency.
  • [Remote Sense Function] This feature allows to compensate the voltage drop on the wire between the terminals of the power supply and the device under test. This function can improve test accuracy, ideal for electronics R&D.

ITECH Bench Programmable AC Power Supply 300V/3A/300VA Lab AC Power Source IT-M7721L

  • IT-M7721L: Voltage: 0-300V; Current:0-3A; Power: 0-300VA; Resolution: 0.1V/10mA; Accuracy: ≤0.03%+12mV/ ≤0.05%+20uA; Interface: Optional RS232/CAN/LAN/GPIB/USB/external analog
  • 1U Half-Rack Mini Size: The size of IT-M7721L variable ac power supply is only 1U Half-Rack, but its max. power is up to 300VA. Its weight is 10LB only. With such high-power density design, the space is better utilized. So it can be portable, convenient for bench testing and good for system building.
  • Multiple Output Modes: The output modes of the AC/DC power supply include AC, DC, AC+DC. It can not only provide pure AC or DC output but also AC+DC output mode which can expand application fields and test DC offset element.

ITECH IT8511A+ DC Electronic Load 0-150V/0-30A/0-150W Single Channel Readback Resolution 0.1mV/0.1mA

  • IT8511A+ DC electronic load: 0~150V/0~30A/0~150W
  • Min. readback resolution: 0.1mV, 0.1mA
  • 4 operating modes: CV/CC/CR/CP

ITECH IT6302 Triple Channels DC Power Supply

  • Triple Output DC power supply 30V/3A/90W*2CH; 5V/3A/15W*1CH
  • Optional serial/ parallel/ track mode
  • Display & adjust voltage and current settings for all 3 channels

iTech IT8514C+ - Single Channel DC Electronic Load,120V,240A,1500W

  • 120V/240A/1500W DC Electronic load
  • Highlight VFD display
  • Dynamic mode: up to 10kHz

ITECH USB Communication Interface with Standard Communication Cable 1.5m IT-E122 for IT6302 DC Power Supply and IT8500+ Series DC Load

  • USB Communication interface
  • With USB standard communication cable
  • Applicable models: IT6302, IT8500+ series

iTech Jr Kids Soccer Ball Smartwatch and LED Bluetooth Speaker - LED Flashlight Camera Selfies Videos Educational Fun Games Music Touch Screen Sports Digital Watch Gift, 27mm, IJ306A-W01

ITECH 20V/5A/100W or 8V/9A/72W Programmable DC Power Supply Single Output Lab Bench Power Supply 1 Channel IT6861A

  • [Single Channel DC Power Supply] 0~20V/0~5A/0~100W or 0~8V/0~9A/0~72W. Resolution: 1mV/0.1mA; Interface: RS232/USB.
  • [Dual Range Voltage & Current] IT6800A dual range dc power supply can output higher voltage at a lower current range or more current at a lower voltage range. It can replace two ordinary ones and conserves bench space and allows for easy portability.
  • [List Function] You can edit a test program consisting of multiple steps, set the voltage value, current value, and delay time for each step.

ITECH FAQs