Magerack feature image

Magerack

Review rating Review rating Review rating Review rating Review rating 4.5 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Magerack has 40 products for sale. Magerack products range in price from $1.09 to $99.99, and the average price of all the products is about $37.05.

You can confidently purchase Magerack products from the seller Magedeals. The brand holds an average rating of 4.5, testifying to its excellent reputation.

Magerack Best Sellers

Last Updated: Jan 12, 2025

Pack 2 for 3" to 4" Pipe - MageCollar Adjustable Metal Rain Collar for Roof Flashing

Aluminum rain collar with black coating for additional corrosion resistance
Adjustable to fit pipes of different diameter
Butyl sealing gasket for further waterproofing
Stainless steel clamp with black coating for additional corrosion resistance
Fit vent pipe flashing with metal cone or with rubber collar
Can be used for new construction, retrofit or repair

10 MageBracket RH R-Panel Trapezoidal Metal Roof Mounting Racking Rib Brackets Clamps for Solar Panel Module Installation

MageBracket RH or RL with optional L-bracket is rib mounting bracket from Magerack for solar panel module installation and other applications on R-panel trapezoidal metal roofs.
It has angle-adjustable brackets that can rotate to fit most of the R-panel trapezoidal metal roofs with rib top width of 1-1/2" or less. RH fits the rib on most commercial trapezoidal metal roofs. RL fits slightly lower rib on residential and commercial trapezoidal metal roofs.
MageBacket RH, RL and optional L bracket are made of aluminum alloy with EPDM rubber gasket seal. Flange bolt is made of stainless steel. Self-drilling screws are made of carbon steel sealed with corrosion-resistant coating.
Compatible with most common solar mounting rails with optional L bracket ready to be attached to rails.
Use the fitting template from the listing pictures to measure and determine which bracket fits your metal roof.
Use template in the listing picture to determine if RH or RL fits better

Pack 10 L-Foot with Flashing for Solar Panel PV Module Mounting Racking Installation

Magerack L-foot and Z bracket with flashing can be used for solar installation on sloped residential composition shingle roof compatible with most common rails
Extremely easy to install at lowest cost
Compatible with most common rails from rail manufacturers
571 lbs uplift and 536 lbs downforce
The vertical slot is for up to 3/8" bolt, through which the bolt is attached to rail
L-foot and Z bracket are made of aluminum alloy 6061-T6 and flashing is made of aluminum sheet 3003 H14.
Patented flashing design, absolutely waterproofing

Pack 10 of 6" Standoff for Solar Panel PV Module Mounting Racking Installation

Magerack 4" or 6" Standoff with Optional L Bracket for Solar Panel Module PV Mounting Racking Installation
Standoff and optional L Bracket are made of aluminum alloy 6061-T6
The slot on the L bracket through which a fastener is attached to rail is for up to 3/8" bolt
The standoff post is 4" or 6" tall from bottom. The L bracket is 3.55" tall
Each order comes with speficied sets of 4" or 6" standoff with optional L bracket
Each set includes one standoff, one L bracket and one 5/16" bolt and washer

MageBracket RL with L Bracket R-Panel Trapezoidal Metal Roof Mounting Racking Rib Bracket Clamp for Solar Panel Module Installation

MageBracket RH or RL with optional L-bracket is rib mounting bracket from Magerack for solar panel module installation and other applications on R-panel trapezoidal metal roofs.
It has angle-adjustable brackets that can rotate to fit most of the R-panel trapezoidal metal roofs with rib top width of 1-1/2" or less. RH fits the rib on most commercial trapezoidal metal roofs. RL fits slightly lower rib on residential and commercial trapezoidal metal roofs.
MageBacket RH, RL and optional L bracket are made of aluminum alloy with EPDM rubber gasket seal. Flange bolt is made of stainless steel. Self-drilling screws are made of carbon steel sealed with corrosion-resistant coating.
Compatible with most common solar mounting rails with optional L bracket ready to be attached to rails.
Use the fitting template from the listing pictures to measure and determine which bracket fits your metal roof.

Magerack Z Bracket with Flashing for Solar Panel PV Module Mounting Racking Installation

Magerack L-foot and Z bracket with flashing can be used for solar installation on sloped residential composition shingle roof compatible with most common rails
Patented flashing design, absolutely waterproofing
Absolutely easy to install at lowest cost
Compatible with most common rails from rail manufacturers
571 lbs uplift and 536 lbs downforce
L-foot and Z bracket are made of aluminum alloy 6061-T6 and flashing is made of aluminum sheet 3003 H14.

10 Flat Tile Hooks for Solar Panel PV Module

Magerack Flat Tile Tile Hook with Optional Flashing can be used for solar installation on sloped residential flat tile roof.
Magerack Height-Adjustable Tile Hook with Optional Flashing can be used for solar installation on sloped residential flat tile roof or curved (Spanish, S tile) tile roof with or without batten. The height is adjustable to accommodate different types of tile roof installed with or without batten. The clearance under the horizontal portion of the tile hook is 1.25” – 2.13” (32 – 54 mm). It is ideal for flat tile roof or curved (Spanish, S tile) tile roof installed with or without batten.
Double flashing with optional flashing
200 lbs uplift with only 0.25" deflection
Wider distance of bolt holes to avoid splitting rafter
6-mm-thick 30-mm-wide stainless steel top arm and 4-mm-thick stainless steel bottom plate
The tile hooks are compatible with most common rails and made of 304 stainless steel. Optional flashing is made of aluminum sheet 3003 H14.

End Clamp MageBracket CL Mounting Kit for Solar Module Panel Mounting Racking Installation on Corrugated Metal Roof

MageBracket CL Rail-less End Clamp and Mid Clamp Mounting Kits are for solar installation on corrugated metal roof. The mid or end clamp mounting kit can mount solar panel directly on corrugated metal roof without using any rails.
It has width adjustable brackets that can adjust to fit most of the corrugated metal roofs.
End clamp and self-bonding mid clamp fit any solar panels with frame thickness of 33 mm - 40 mm. If your frame thickness is less than 33 mm or more than 40 mm, we also have corresponding mid and end clamps for such frame. Please send us a message to request such mid and end clamps after purchase.
MageBracket mid and end mounting kits are made of aluminum alloy with EPDM rubber gasket seal. Bolt is made of stainless steel.
Each kit comes with one MageBracket CL bracket and one mid or end clamp. Mid clamp also includes bonding clip.

4" Standoff for Solar Panel PV Module Mounting Racking Installation

Magerack 4" or 6" Standoff with Optional L Bracket for Solar Panel Module PV Mounting Racking Installation
Standoff and optional L Bracket are made of aluminum alloy.
The slot on the L bracket through which a fastener is attached to rail is for up to 3/8" bolt.
The standoff post is 4" or 6" tall from bottom. The optional L bracket is 3.55" tall.
Each set includes one standoff, one optional L bracket and one 5/16" bolt and washer

6 MageClamp Standing Seam Metal Roof Mounting and Racking Bracket Clamp for Solar Panel Module Installation

Standing seam metal roof clamp with optional L bracket for solar installation and other applications
Fit most common stand seam metal roofs and optional L bracket can be attached to most solar mounting rails
MageClamp can also be used to install snow guard, heat cable and heat tape on standing seam metal roof
MageClamp is made of aluminum alloy with stainless set screws and flange bolt
Pack of 6 MageClamp clamps

Tall Silver L Bracket Foot for Solar Panel PV Module Mounting Racking Installation

Magerack L bracket foot can be used for solar installation on sloped residential composition shingle roof with most common rails or other applications
L bracket is made of anodized aluminum alloy and Extra Tall L Bracket is made of stainless steel
The vertical portion has serration on both sides except Extra Tall L Bracket
L and Tall L bracket's top slot through which a fastener is attached to rail is for up to 3/8" bolt. The bottom slot is for 5/16" lag screw
L bracket is 3-1/2" tall, 1-1/2" wide and 3" long (deep), and made of anodized aluminum alloy
Tall L bracket is 4-1/2" tall, 1-1/2" wide and 3" long (deep), and made of anodized aluminum alloy
Extra tall L bracket is made of 304 stainless steel with black coating for outdoor use. The L bracket is 8" tall, 1-3/4" wide and 0.31" (8 mm) thick. The bottom is 4" long. The two slots are for up to 3/8" or M10 bolt.
Compatible with most common solar mounting rails

MageBracket RH End Clamp Mounting Kits for R-Panel Trapezoidal Metal Roof Solar Panel Module Mounting Racking Installation

Rail-less solar mounting kits for R-panel trapezoidal metal roof
Fit most common R-panel trapezoidal metal roofs
Mid and end clamps are UL 2703 certified
Provided bonding clip bonds two solar modules electrically through mid clamp
RH and RL are slightly different to fit different R-panel trapezoidal metal roof. RH is for slightly tall profile of rib and RL for slightly low profile of rib
Use template in the listing picture to determine if RH or RL fits better

10 Heavy-Duty Tile Hooks for Solar Panel PV Module Mounting Racking Installation on Tile Roof

Magerack Height-Adjustable Top-Mount Tile Hook with Optional Flashing can be used for solar installation on sloped residential flat tile roof or curved (Spanish, S tile) tile roof with or without batten. The tile hooks are compatible with most common rails and made of 304 stainless steel. Optional flashing is made of aluminum sheet 3003 H14.
The height is adjustable to accommodate different types of tile roof installed with or without batten. The clearance under the horizontal portion of the tile hook is 1.25” – 2.13” (32 – 54 mm). It is ideal for flat tile roof or curved (Spanish, S tile) tile roof installed with or without batten.
Double flashing with optional flashing
200 lbs uplift with only 0.25" deflection
Or 650 lbs uplift with only 0.25" deflection for heavy-duty tile hook
Wider distance of bolt holes to avoid splitting rafter
6-mm-thick 30-mm-wide stainless steel top arm and 4-mm-thick stainless steel bottom plate
Or 6-mm-thick 45-mm-wide stainless steel top arm and 6-mm-thick stainless steel bottom plate for heavy-duty tile hook
Compatible with most common rails

Pack 10 Mid Clamp MageBracket CL Rail-Less Mounting Kits for Solar Module Panel Mounting Racking Installation on Corrugated Metal Roof

MageBracket CL Rail-less End Clamp and Mid Clamp Mounting Kits are for solar installation on corrugated metal roof. The mid or end clamp mounting kit can mount solar panel directly on corrugated metal roof without using any rails.
It has width adjustable brackets that can adjust to fit most of the corrugated metal roofs.
End clamp and self-bonding mid clamp fit any solar panels with frame thickness of 33 mm - 40 mm. If your frame thickness is less than 33 mm or more than 40 mm, we also have corresponding mid and end clamps for such frame. Please send us a message to request such mid and end clamps after purchase.
MageBracket mid and end mounting kits are made of aluminum alloy with EPDM rubber gasket seal. Bolt is made of stainless steel.
Each kit comes with one MageBracket CL bracket and one mid or end clamp. Mid clamp also includes bonding clip.

MageBracket CL Corrugated Metal Roof Mounting Racking Rib Bracket Clamp for Solar Panel Module Installation

MageBracket CH and CL with Optional L Bracket are mounting brackets for solar panel module installation and other applications on corrugated metal roofs.
It has adjustable brackets and fits most of the corrugated metal roofs of panel.
MageBacket CH and CL with Optional L Bracket are made of aluminum alloy with EPDM rubber gasket seal. Flange bolt is made of stainless steel. Self-drilling screws are made of carbon steel sealed with corrosion-resistant coating.
Can be used for solar installation and other applications on corrugated metal roofs.
Compatible with most common solar mounting rails with optional L bracket ready to be attached to rails.

Height-Adjustable Tile Hook for Solar Panel PV Module Mounting Racking Installation on Tile Roof

Magerack Flat Tile Tile Hook with Optional Flashing can be used for solar installation on sloped residential flat tile roof.
Magerack Height-Adjustable Tile Hook with Optional Flashing can be used for solar installation on sloped residential flat tile roof or curved (Spanish, S tile) tile roof with or without batten. The height is adjustable to accommodate different types of tile roof installed with or without batten. The clearance under the horizontal portion of the tile hook is 1.25” – 2.13” (32 – 54 mm). It is ideal for flat tile roof or curved (Spanish, S tile) tile roof installed with or without batten.
Double flashing with optional flashing
200 lbs uplift with only 0.25" deflection
Wider distance of bolt holes to avoid splitting rafter
6-mm-thick 30-mm-wide stainless steel top arm and 4-mm-thick stainless steel bottom plate
The tile hooks are compatible with most common rails and made of 304 stainless steel. Optional flashing is made of aluminum sheet 3003 H14.

4 RH End Clamp MageBracket RH Mouting Kits for R-Panel Trapezoidal Metal Roof Solar Panel Module Mounting Racking Installation

Rail-less solar mounting kits for R-panel trapezoidal metal roof
Fit most common R-panel trapezoidal metal roofs
Mid and end clamps are UL 2703 certified
Provided bonding clip bonds two solar modules electrically through mid clamp
RH and RL are slightly different to fit different R-panel trapezoidal metal roof. RH is for slightly tall profile of rib and RL for slightly low profile of rib
Use template in the listing picture to determine if RH or RL fits better

MageFoot for Solar Mounting Racking Installation on Composite Shingle, Standing Seam or Trapezoidal Metal Roofs

MageFoot with L Bracket is a simple roof attachment for solar installation on composite shingle roof, standing seam metal roof or R-panel trapezoidal metal roof.
The bracket has butyl sealing gaskets on the bottom of the brackets that are attached to the flat area on composite shingle or metal roof.
The optional L bracket has lateral and vertical adjustment capability and is attacThe optional L bracket has lateral and vertical adjustment capability and is attached to the bracket using a 5/16 x 3/4" stainless steel flange bolthed to the bracket using a 5/16 x 3/4" stainless steel flange bolt
MageFoot is made of aluminum alloy with butyl sealing gasket. Flange bolt is made of stainless steel.
MageFoot only and MageFoot wiht L Bracket are for metal roof and don't include any screws attached to the roof
MageFoot with Screws and MageFoot with L Bracket and Screws include two 5/16 x 2" stainless steel lag screws for composite shingle roof.
Can be used for solar installation and other applications on any sloped roof with 1-1/2" wide flat area such as composite shingle, standing seam and R-panel trapezoidal metal roof.
Compatible with most common solar mounting rails with L bracket ready to be attached to rails.

4 Pack End Clamp MageClamp Mounting Kits for Standing Seam Metal Roof Solar Panel Module Racking Installation

Rail-less solar mounting kits for standing seam metal roof
Fit most common standing seam metal roofs
Mid and end clamps are UL 2703 certified
Provided bonding clip bonds two solar modules electrically through mid clamp
MageClamp and Mid/End Clamps are made of aluminum alloy and stainless steel with stainless steel set screws and flange bolt

MageClamp with L Bracket Standing Seam Metal Roof Mounting and Racking Bracket Clamp for Solar Panel Module Installation

Standing seam metal roof clamp with L bracket for solar installation and other applications
Fit most common stand seam metal roofs and L bracket can be attached to most solar mounting rails
MageClamp can also be used to install snow guard, heat cable and heat tape on standing seam metal roof
MageClamp is made of aluminum alloy with stainless set screws and flange bolt

Magerack FAQs

Yes, Magerack is a legitmate brand on Amazon. After conducting a comprehensive analysis of 218 customer reviews for Magerack products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Magerack has achieved a respectable rating of 4.5 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Magerack on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Magerack and want to find more Magerack products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Magerack in the search box and hit Enter to see the search results.
  3. Find and click the correct Magerack to go to the new page.
  4. Select the products you want in the Magerack buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Magerack products.

We analyze millions of Magerack products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 40 Magerack products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Magerack page.
  2. Select the product you want in the Magerack buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Pack 2 for 3" to 4" Pipe - MageCollar Adjustable M..., you can view it on Amazon page.
  3. Place your order on Amazon.

Our mission is to provide you with the most up-to-date and objective information about the Magerack products, helping you make more informed buying decisions. We recommend best choices of the products from the Magerack brand, helping you make better shopping choices with less time and energy.