Raidenracing feature image

Raidenracing

Review rating Review rating Review rating Review rating Review rating 4.4 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Raidenracing has 261 products for sale. Raidenracing products range in price from $14.99 to $129.99, and the average price of all the products is about $28.24.

You can confidently purchase Raidenracing products from the seller Raidenracing. The brand holds an average rating of 4.4, testifying to its excellent reputation.

Raidenracing Best Sellers

Last Updated: Jan 8, 2026

Nylon Mesh Chassis Dirt Dust Resist Guard Cover for Traxxas 1/10 Rustler 4X4 VXL 4WD Brush & Brushless

Material: Nylon Mesh
For Traxxas 1/10 Traxxas 1/10 Rustler 4X4 Brush & Brushless Version , NOT for OLD 2WD Edition Rustler
Attention: This item only include the dirt cover , the truck in picture is not included
Clean the Chssis , and Warm up the double-sided tape with hair dryer (until the glue has signs of liquefaction) before stick it to the Chassis , it will stick more closer.Do not use the suede velcro immediately to pull after stick the hook velcro to the chassis , try to stand still for more than 1 hour

Raidenracing Upgrade Harden Steel 50T Main Spur Gear 1 Mod M1 for Traxxas X-MAXX XRT E-REVO 2.0 NEW MAXX XO-1-1 pc

Material: Harden Steel
Color : Black
50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.

Hardened Steel 54T SPUR Main Gear for TRAXXAS 1/10 Slash Stampede Rsutler 4x4 6804 6807 6808 6708 Replace#3956

Material: Hardened Steel
For 1/10 SLASH STAMPEDE 4x4 Rsutler 6804 6807 6808 6708
Replace #3956

Raidenracing Chassis Dirt Dust Resist Guard Cover for 1/8 Arrma Outcast BLX Monster Truck & Typhon 3S

Material: Nylon Mesh
Color : Black
For 1/8 Arrma Outcast BLX Monster Truck & Typhon 3S
Attention: This item only include the dirt cover , the truck in picture is not included

Chassis Guard Dirt Dust Resist Cover for Traxxas 1/10 V2 Maxx Wide MAXX - Resist Rocks Mud Sands Snow Leaves

Material: Nylon Mesh
For Traxxas 1/10 V2 Newest Maxx (NOT for Old Version V1 Maxx)
Attention: This item only include the dirt cover , the truck in picture is not included
Clean the Chssis , and Warm up the double-sided tape with hair dryer (until the glue has signs of liquefaction) before stick it to the Chassis , it will stick more closer.Do not use the suede velcro immediately to pull after stick the hook velcro to the chassis , try to stand still for more than 1 hour

Stainless Steel Body Armor Roof + Hood + Side + Light Bar Panel for Traxxas 1/7 UDR Unlimited Desert Racer - with LED Set

Material: Stainless Steel ( Steel Panel 15pcs , INCLUED LED )
Attention: This item only include the Panel , the truck in picture is not included
Handmade,a few machining mark are inevitable
Need to abandon the stock body

Chassis Dirt Guard Cover for Traxxas 1/10 Original 4x4 Slash 6807 6808 (Non-LCG Chassis)

Material: Nylon Mesh
Color : Black
For 1/10 Scale Traxxas Slash 4X4 6807 6808 (non-LCG chassis)
Attention: This item only include the dirt cover , the truck in picture is not included
Clean the Chssis , and Warm up the double-sided tape with hair dryer (until the glue has signs of liquefaction) before stick it to the Chassis , it will stick more closer.Do not use the suede velcro immediately to pull after stick the hook velcro to the chassis , try to stand still for more than 1 hour

Chassis Rocks Snow Leaves Mud Dirt Dust Resist Guard Cover fits Arrma 1/5 Outcast KRATON 8S

Material: Nylon Mesh
For Arrma 1/5 OUTCAST KRATON 8S
Clean the Chssis , and Warm up the double-sided tape with hair dryer (until the glue has signs of liquefaction) before stick it to the Chassis , it will stick more closer
Use the super glue (not inluded) will make the velcro stick more stronger

Chassis Guard Dirt Dust Resist Cover for Traxxas 1/8 Sledge Monster Truck #95076-4 - Resist Rocks Mud Sands Snow Leaves

Material: Nylon Mesh
For Traxxas 1/8 Sledge Monster Truck #95076-4
Attention: This item only include the dirt cover , the truck in picture is not included
Clean the Chssis , and Warm up the double-sided tape with hair dryer (until the glue has signs of liquefaction) before stick it to the Chassis , it will stick more closer.Do not use the suede velcro immediately to pull after stick the hook velcro to the chassis , try to stand still for more than 1 hour

Raidenracing Aluminium Alloy Steering Blocks Front Knuckle Arm 8937 for Traxxas 1/10 V1 V2 MAXX - Blue

Material: 6061 Aluminium
Color : BLUE
For Traxxas 1/10 V1 Maxx V2 Newest Wide Maxx
Replace stock parts 8937

Aluminium Alloy Front Steering Toe Links for Traxxas 1/16 Mini Maxx 107154-1 Upgrades Replace 10742 - Blue

Material: Aluminium
Color : Blue
For Traxxas 1/16 Mini Maxx 107154-1 , Replace stock parts 10742
Package includes : Steering Toe links - 2pcs
Include: Strap mount x 2 ; Strap x 1 ; Screw x 2

Chassis Guard Dust Resist Dirt Cover for Traxxas 1/10 Rally Slash 4x4 LCG

Material: Nylon Mesh
Color : Black
For 1/10 Scale Traxxas Slash 4X4 LCG
Attention: This item only include the dirt cover , the truck in picture is not included
Clean the Chssis , and Warm up the double-sided tape with hair dryer (until the glue has signs of liquefaction) before stick it to the Chassis , it will stick more closer.Do not use the suede velcro immediately to pull after stick the hook velcro to the chassis , try to stand still for more than 1 hour

Chassis Dirt Dust Resist Guard Cover for 1/5 Traxxas 6S 8S X-Maxx

Material: Nylon Mesh ; Color : Black
For 1/5 Scale Traxxas X-MAXX
Attention: This item only include the dirt cover , the truck in picture is not included
Clean the Chssis , and Warm up the double-sided tape with hair dryer (until the glue has signs of liquefaction) before stick it to the Chassis , it will stick more closer. Do not use the suede velcro immediately to pull after stick the hook velcro to the chassis , try to stand still for more than 1 hour

Chassis Guard Dirt Dust Resist Cover for Traxxas 1/8 MAXX Slash #102076-4 Short Course TURCK

Material: Nylon Mesh
For Traxxas 1/8 MAXX SLASH #102076-4
Attention: This item only include the dirt cover , the truck in picture is not included
Clean the Chssis , and Warm up the double-sided tape with hair dryer (until the glue has signs of liquefaction) before stick it to the Chassis , it will stick more closer.Do not use the suede velcro immediately to pull after stick the hook velcro to the chassis , try to stand still for more than 1 hour

Stainless Steel Chassis Armor Front & Rear Skid Plate 5pcs Hollow Version for Traxxas X-Maxx XMAXX 6S 8S

Material: Stainless Steel
Color : Silver
For 1/5 Scale Traxxas X-MAXX 6S 8S
Front & Rear skid plate fixed by screw , Middle Chassis Armor fixed by 3M double-sided tape

Chassis Guard Dirt Dust Resist Cover for Arrma 1/10 V3 SENTON - Resist Rocks Mud Sands Snow Leaves

Material: Nylon Mesh
For Arrma 1/10 V3 SENTON
Attention: This item only include the dirt cover , the truck in picture is not included
Clean the Chssis , and Warm up the double-sided tape with hair dryer (until the glue has signs of liquefaction) before stick it to the Chassis , it will stick more closer.Do not use the suede velcro immediately to pull after stick the hook velcro to the chassis , try to stand still for more than 1 hour

Chassis Guard Dust Resist Dirt Cover for Traxxas 1/10 Slash 2WD LCG

Material: Nylon Mesh
Color : Black
for Traxxas 1/10 Slash 2WD LCG
Attention: This item only include the dirt cover , the truck in picture is not included

Stainless Steel Chassis Skid Plate Protector Guard Armor Front + Center + Rear 5pcs for Traxxas V2 1/10 Newest Wide Maxx 89086-4

Material: Stainless Steel
Color : Silver
For 1/10 Traxxas V2 1/10 Maxx 89086-4 (NOT for V1 Maxx)
Installation steps: 1. Side Protect(2pcs)--> 2.Center Protect(1pcs)--> 3.Front + Rear Skid Plates (2pcs)

Raidenracing Rear Trailing Arms Lower Linkage Orange for 1/7 Unlimited Desert Racer UDR Aluminum 8544

Material: Aluminum
Color : Orange
For 1/7 Traxxas UDR
Replace stock parts 8544

Nylon Uprade Parts Side Door Grid Guardrail for Arrma 1/7 FIRETEAM Speed Assault Vehicle

Material: Nylon
For Arrma 1/7 FIRETEAM 6S 4WD BLX SPEED ASSAULT VEHICLE
Attention: This item only include the Side Door Grid Guardrail , the truck in picture is not included

Raidenracing FAQs

Yes, Raidenracing is a legitmate brand on Amazon. After conducting a comprehensive analysis of 3,523 customer reviews for Raidenracing products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Raidenracing has achieved a respectable rating of 4.4 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Raidenracing on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Raidenracing and want to find more Raidenracing products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Raidenracing in the search box and hit Enter to see the search results.
  3. Find and click the correct Raidenracing to go to the new page.
  4. Select the products you want in the Raidenracing buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Raidenracing products.

We analyze millions of Raidenracing products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 261 Raidenracing products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Raidenracing page.
  2. Select the product you want in the Raidenracing buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Nylon Mesh Chassis Dirt Dust Resist Guard Cover fo..., you can view it on Amazon page.
  3. Place your order on Amazon.

Our mission is to provide you with the most up-to-date and objective information about the Raidenracing products, helping you make more informed buying decisions. We recommend best choices of the products from the Raidenracing brand, helping you make better shopping choices with less time and energy.