MEGAWARE KEELGUARD feature image

MEGAWARE KEELGUARD

Review rating Review rating Review rating Review rating Review rating 4.5 Fact checked
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, MEGAWARE KEELGUARD has 59 products for sale. MEGAWARE KEELGUARD products range in price from $37.75 to $237.99, and the average price of all the products is about $94.73.

We found that most of the MEGAWARE KEELGUARD products are manufactured by MEGAWARE KEELGUARD INC.. The manufacturer provides MEGAWARE KEELGUARD with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase MEGAWARE KEELGUARD products from the seller Prime Marine. The brand holds an average rating of 4.5, testifying to its excellent reputation.

MEGAWARE KEELGUARD Best Sellers

Last Updated: Jan 12, 2025

Megaware Self-Adhesive DIY Keel Guard - Prolongs The Life of Your Boat - Protects from Abrasive Sand, Rocks and Oyster Beds - 9 Kit Sizes - 5 Inches Wide (Black)

Boat Dock Guards
Megaware Self-Adhesive DIY Keel Guard - Prolongs The Life of Your Boat - Protects from Abrasive Sand, Rocks and Oyster Beds - 9 Kit Sizes - 5 Inches Wide (Black) Cover
Buy on Amazon Find on eBay
Boat Keel Protector - Protect your boat keel from sand, rocks, oyster beds, concrete ramps, and everyday wear and tear on the water with The Original Do-It-Yourself Keel Guard from Megaware. Note: compatible with fiberglass and some aluminum boats
Easy to Install - The boat protector features an exclusive self-sealing contoured edge that creates a clean, tight seal; no messy sealants needed. Easy install in 4 simple steps; etch, clean, prime, apply!
Superior Engineering - This patented hydrodynamic drag reduction design is produced using the highest quality materials and 3M premium adhesives. Pliable and tough, the 5-inch wide boat keel protection easily conforms to your boat's keel; it's shock absorbing, exclusive contoured edge design, and drag reduction channels won't slow your boat down
9 Standard Length Kits - Our boat keel guard comes in 9 different sizes that range from 4 to 12 feet long to ensure you have the correct size; shields come in 12 colors that will not fade or dull while enhancing the look of your boat. Note: if the size of your boat falls between 2 sizes, order a size up for additional keel protection
Lifetime Warranty - The Megaware KeelGuard is so tough and reliable that we include a lifetime warranty during normal use of your boat, for as long as you own your boat.

Megaware KeelGuard - 839; - Black

Boat Trailer Guides & Rollers
Megaware KeelGuard - 839; - Black Cover
Buy on Amazon Find on eBay

Megaware - XL ScuffBuster Bow Guard with Notch for Boats - Protects from Scuffs and Scratches - Stainless Steel Shield with 3M Adhesive - Mirror Polished Finish (9 x 8.75 in)

Boat Dock Guards
Megaware - XL ScuffBuster Bow Guard with Notch for Boats - Protects from Scuffs and Scratches - Stainless Steel Shield with 3M Adhesive - Mirror Polished Finish (9 x 8.75 in) Cover
Buy on Amazon Find on eBay
Boat Bow Protector - Protect your vessel from trailer roller scuffs, scratches, and everyday wear and tear on the water with the Scuffbuster Bow Guard with Notch from Megaware that's perfect to add to your boat supplies
Easy to Install - This boat bow protector features a 3M adhesive that is easy to install in just 4 simple steps; prep the surface, bend it to conform to your hull, peel off the backing and attach it to the surface while applying pressure; use a rubber mallet to activate the pressure sensitive adhesive
Superior Engineering - Our boat guard is made with anti-corrosive, 22-gauge stainless steel metal with a mirror-polished finish and easily bends to your boat's hull to shield the gelcoat from minor damage when trailering; great for fiberglass and most aluminum boats
The Perfect Size - The extra-large bow guard measures 9 x 8.75 inches to ensure a proper fit for standard-size or larger boats; your boat bow will be well protected when docking so you no longer have to worry about damage to your hull or bow
Instructions Included - An instruction sheet is provided in each package and must be strictly followed so as to not compromise the full bonding capabilities of the 3M adhesive.

Megaware SkegPro 655 - Protects Against Damage from Ramp Dragging, Rocks, Debris and Submerged Objects - Stainless Steel Skeg Protector - Fits Mercruiser, Mercury, Suzuki, and Yamaha Motors

Boat Dock Guards
Megaware SkegPro 655 - Protects Against Damage from Ramp Dragging, Rocks, Debris and Submerged Objects - Stainless Steel Skeg Protector - Fits Mercruiser, Mercury, Suzuki, and Yamaha Motors Cover
Buy on Amazon Find on eBay
Skeg Protector - Reduce wear and tear while protecting your skeg against damage from ramp dragging, rocks, debris, and submerged objects with the Megaware SkegPro - the makers of the original KeelGuard
Proper Protection - Our guard helps prevent corrosion and freezing on your skeg; it also features a drain hole at the bottom to prevent water from collecting to ensure your boat doesn't become stagnant
Strong and Reliable - The skeg cover is made from 18 gauge marine grade 304 stainless steel with self-locking hardware and a mirror-polished finish. The easy do-it-yourself application ensures you'll have your SkegPro installed in less than 10 minutes
Designed for Specific Motors - Fits MERCRUISER: Pre Alpha 1 Drives 1973-1984; Alpha 1 1985-1990; Alpha 1 Gen 2 1991-Present. MERCURY: 40-50-60hp Bigfoot & Command Thrust, Sea Pro 2001-Present; 75-90-115 2 & 4 Stroke 3.44” Torpedo 1984-Present; 150-175hp Optimax, Proxs 1978-2018, 125-135-140hp 2 Stroke 1986-2012; SUZUKI: 150-175-200-225hp 2 & 4 Stroke 1986-Present (No AS, SS); DF250T (No SS or AP Models) 2004-Present, and YAMAHA: 200 4 Stroke V6 2002-2018; 225-250hp 2 & 4 Stroke 1997-Present; 200-250 Vmax Sho 25” 2015-Present; 300hp 4 Stroke 2010-Present, 300hp 2 stroke 2004-2006
A Commitment to Excellence - Megaware KeelGuard is a family-owned business that revolutionized the keel protection industry with its patented, do-it-yourself keel protector in 1992. We offer a range of high-quality products to keep innovating and providing top-notch support for your investment.

Megaware Keelguard SkegGuard 27151 Skeg Protector - Protects Against Ramp Dragging - Fits Yamaha 150-175HP 2 & 4 Stroke 1984-Present, 200HP 4 St. Inline 4 2012-Present, 350 4 St. 2007-2019

Boat Dock Guards
Megaware Keelguard SkegGuard 27151 Skeg Protector - Protects Against Ramp Dragging - Fits Yamaha 150-175HP 2 & 4 Stroke 1984-Present, 200HP 4 St. Inline 4 2012-Present, 350 4 St. 2007-2019 Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27151 for Yamaha 150-175HP 2 & 4 Stroke 1984-Present, 200HP 2 Stroke (No V/VX) 1984-2006, 200HP 4 Stroke I-4 2012-Present, 300HP 4 Stroke 2007-2009, 350HP 4 stroke 2007-2019. For 350HP year 2023+ See Megaware SkegGuard 27301

MEGAWARE KEELGUARD SkegGuard 27211 Skeg Protector with Drain Hole - Protects Against Ramp Dragging and Wear and Tear - Easy to Install - Fits Mercury Mariner - See Listing for Fitment Details

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27211 Skeg Protector with Drain Hole - Protects Against Ramp Dragging and Wear and Tear - Easy to Install - Fits Mercury Mariner - See Listing for Fitment Details Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
SkegGuard 27211 FITS Mercury: 75-90-115hp Command Thrust, SeaPro 2014-Present, 135-150-175-200-225-250-275-300hp 4 Stroke & Verado 4.8" Torpedo 2005-2018, 150hp 4 Stroke, ProXS, SeaPro 4.8" 2019-Present, 200-225-250hp 2 Stroke Optimax and ProXS (No Torquemaster) 1999-2018, 200-250-300hp 4 Stroke PRO Verado 4.8" Gearcase 2015-2018

MEGAWARE KEELGUARD SkegGuard 27061 Skeg Protector - Protects Against Ramp Dragging - Fits Mercury: 75-90-115hp 4 St. 2015-Present, 135hp 1986-2012, 150-175hp 2 Stroke, EFI, Optimax, ProXS 1978-2018

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27061 Skeg Protector - Protects Against Ramp Dragging - Fits Mercury: 75-90-115hp 4 St. 2015-Present, 135hp 1986-2012, 150-175hp 2 Stroke, EFI, Optimax, ProXS 1978-2018 Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27061 for Mercury: 75-90-115 4 Stroke 2015-Present, 135HP 2 Stroke 1986-2012, 140HP 2001-2005, 150-175HP 2 Stroke, Optimax, Pro XS, EFI 4.75" Torpedo 1978-2018. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha

MEGAWARE KEELGUARD SkegGuard 27261 Skeg Protector with Drain Hole - Protects Against Ramp Dragging - Fits Suzuki 50AV-60AV 2014-Present, DF90T 2001-2010, DF100-115-140 (No 100BT) 2001-Present

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27261 Skeg Protector with Drain Hole - Protects Against Ramp Dragging - Fits Suzuki 50AV-60AV 2014-Present, DF90T 2001-2010, DF100-115-140 (No 100BT) 2001-Present Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bi
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27261 FITS Suzuki: 50AV-60AV 2014-Present, DF 90HP 4 Stroke 2001-2010, DF100-115-140 (No 100BT) 2001-Present

MEGAWARE KEELGUARD SkegGuard 27031 - Protects Against Ramp Dragging Everyday Wear and Tear - Skeg Protector with Drain Hole - Easy Install - Fits Mercury MerCruiser Alpha 1 Generation 2 1991-Present

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27031 - Protects Against Ramp Dragging Everyday Wear and Tear - Skeg Protector with Drain Hole - Easy Install - Fits Mercury MerCruiser Alpha 1 Generation 2 1991-Present Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27031 FITS Mercury MerCruiser: Alpha 1 Generation 2 1991-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha

Megaware - XL ScuffBuster Bow Guard for Boats - Protects from Scuffs and Scratches - Stainless Steel Shield with 3M Adhesive - Mirror Polished Finish (9 x 8.75 in)

Boat Dock Guards
Megaware - XL ScuffBuster Bow Guard for Boats - Protects from Scuffs and Scratches - Stainless Steel Shield with 3M Adhesive - Mirror Polished Finish (9 x 8.75 in) Cover
Buy on Amazon Find on eBay
Boat Bow Protector - Protect your vessel from trailer roller scuffs, scratches, and everyday wear and tear on the water with the Scuffbuster Bow Guard from Megaware that's perfect to add to your boat supplies
Easy to Install - This boat bow protector features a 3M adhesive that is easy to install in just 4 simple steps; prep the surface, bend it to conform to your hull, peel off the backing and attach it to the surface while applying pressure; use a rubber mallet to activate the pressure sensitive adhesive
Superior Engineering - Our boat guard is made with anti-corrosive, 22-gauge stainless steel metal with a mirror-polished finish and easily bends to your boat's hull to shield the gelcoat from minor damage when trailering; great for fiberglass and most aluminum boats
The Perfect Size - The extra-large bow guard measures 9 x 8.75 inches to ensure a proper fit for standard-size or larger boats; your boat bow will be well protected when docking so you no longer have to worry about damage to your hull or bow
Instructions Included - An instruction sheet is provided in each package and must be strictly followed so as to not compromise the full bonding capabilities of the 3M adhesive.

MEGAWARE KEELGUARD SkegGuard 27291 Skeg Protector with Drain Hole - Protects Against Ramp Dragging and Wear and Tear - Fits Yamaha 75-90hp 2017-Present, 115-130hp 2 & 4 Stroke 2000-Present

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27291 Skeg Protector with Drain Hole - Protects Against Ramp Dragging and Wear and Tear - Fits Yamaha 75-90hp 2017-Present, 115-130hp 2 & 4 Stroke 2000-Present Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27291 for Yamaha: 75-90HP 4 Stroke 2017-Present, 115-130HP 2 & 4 Stroke (No P or B-series) 2001-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha

MEGAWARE KEELGUARD SkegGuard 27412 Skeg Protector with Drain Hole - Protects Against Ramp Dragging - Fits Mercury 200-225-250-300HP 4 Stroke ProXS Torque Master, 4.6L V8 4.8" Torpedo, 2019-Present

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27412 Skeg Protector with Drain Hole - Protects Against Ramp Dragging - Fits Mercury 200-225-250-300HP 4 Stroke ProXS Torque Master, 4.6L V8 4.8" Torpedo, 2019-Present Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27412 FITS Mercury: 200-225-250-300HP 4.6L V8 ProXS Torque Master 4.8” Gearcase, 20" Shaft, 2019-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha

MEGAWARE KEELGUARD SkegGuard 27141 - Skeg Protector Against Ramp Dragging - Fits Some Suzuki 150-175-200-225-250hp - See Listing Details for Fitment Info

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27141 - Skeg Protector Against Ramp Dragging - Fits Some Suzuki 150-175-200-225-250hp - See Listing Details for Fitment Info Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
FITS Suzuki: DT150, DF150T, DF150AP, DF150AT, DF150AS, DF150AZ (No AST,SS)1986-Present; DT175, DF175 1987-2024; DT200, DF200T, DF200AT, DF200AP, DF200Z (No SS,AST,ARSS)1987-2024; DF225, DF225T 1990-2024; DF250T, DF250Z (No SS, AP, ATSS, ST) 2004-2024 Only fits models and years listed. Does not fit 2023 STEALTH lower.

MEGAWARE KEELGUARD SkegGuard 27071 - Skeg Protector - Protects Against Ramp Dragging - Easy to Install with Drain - Fits Mercury, Force, Honda, Nissan/Tohatsu - See Listing for Motor Fitment Details

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27071 - Skeg Protector - Protects Against Ramp Dragging - Easy to Install with Drain - Fits Mercury, Force, Honda, Nissan/Tohatsu - See Listing for Motor Fitment Details Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27071 FITS Honda: 60BFP Power Thrust 2010-Present, 75-90hp 4 stroke 4 cyl 1995-Present, 100hp 4 stroke 4 cyl 2007-Present, 115hp 4 stroke 1999-2010. FORCE: 70-90hp 2 stroke by Mercury 1998-2002. MERCURY MARINER: 40-50-60hp 4 stroke Big Foot, Command Thrust, Sea Pro 4.25" 2001-Present, 75-90-115hp 2 & 4 stroke 1984-2014, 125hp 2 stroke 2000-2012. NISSAN TOHATSU: 70-75-90-115-120-140hp 2 stroke 1993-2018, 75-90hp BFT 4 stroke 2014-2019

MEGAWARE KEELGUARD SkegGuard 27411 Skeg Protector Against Ramp Dragging - Fits Mercury 175-200-225hp 4 Stroke 4.8" Torpedo, 175-200-225-250-300hp 4.8” Torpedo ProXS (No TorqueMaster) 2019-Present

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27411 Skeg Protector Against Ramp Dragging - Fits Mercury 175-200-225hp 4 Stroke 4.8" Torpedo, 175-200-225-250-300hp 4.8” Torpedo ProXS (No TorqueMaster) 2019-Present Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27411 FITS Mercury: 175-200-225hp 4 Stroke 3.4L V6 2019-Present, PROXS: 175-200-225-250-300HP 4.8” Torpedo (No TorqueMaster) 2019-Present. SEAPRO: 200HP 2019-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha

Megaware Keelguard Pontoon Guard - Protects Exposed Areas of Your Pontoon from Dents and Scrapes - 3M Reflective Strip - Boat Tube and Log Bumper Guard - 32 Ft Kit - Pontoons Up to 21 Ft (Gray)

Boat Dock Guards
Megaware Keelguard Pontoon Guard - Protects Exposed Areas of Your Pontoon from Dents and Scrapes - 3M Reflective Strip - Boat Tube and Log Bumper Guard - 32 Ft Kit - Pontoons Up to 21 Ft (Gray) Cover
Buy on Amazon Find on eBay
Pontoon Protector - Protect vulnerable and exposed areas of your pontoon against unsightly dents and scrapes with Megaware Keelguard Pontoon Guard - comes in 4 colors (Blue, Red, Gray, and Black) and is UV-stabilized
Solid and Durable - The pontoon docking guard is made from strong 1/4-inch thick ultra-tough polymer composite for maximum durability. It also features a wide machine-contoured leading edge and contoured sides for a clean, sleek, and tight seal
Increases Visibility and Safety - The boat tube protector features a 3M reflective strip to make your vessel more visible during night operations or while anchored or beached when illuminated by headlights or searchlights
Two Lengths for Double the Options - Our boat dock bumper guards come in 2 lengths to ensure you find the right fit for your pontoon. Our sizes include a 32 feet kit - (2) 16 feet lengths for pontoons up to 21 feet, and a 40 feet kit - (2) 20 feet lengths for pontoons 22–25 feet
3-Year Warranty - The Megaware KeelGuard Pontoon Guard is so tough and reliable that we include a 3-year warranty during regular use of your boat for as long as you own your vessel

MEGAWARE KEELGUARD SkegGuard 27051 Skeg Protector with Drain Hole - Protects Against Ramp Dragging - Fits Mercury MerCruiser Bravo 1 & 3 1990-Present (Not Compatible with XR Sport Models)

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27051 Skeg Protector with Drain Hole - Protects Against Ramp Dragging - Fits Mercury MerCruiser Bravo 1 & 3 1990-Present (Not Compatible with XR Sport Models) Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27051 FITS Mercury MerCruiser: Bravo 1 & 3 1990-Present (Not Compatible with XR or Sport Master or Bravo 2 models). Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha

MEGAWARE KEELGUARD SkegGuard 27331 Skeg Protector with Drain Hole - Protects Against Ramp Dragging - Easy to Install - Fits Yamaha 30 & 60hp 4 Stroke 2002-Present & 40-50hp 2 & 4 Stroke 1997-Present

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27331 Skeg Protector with Drain Hole - Protects Against Ramp Dragging - Easy to Install - Fits Yamaha 30 & 60hp 4 Stroke 2002-Present & 40-50hp 2 & 4 Stroke 1997-Present Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27331 for Yamaha: 30 & 60HP 4 Stroke 2002-Present, 40-50HP 2 & 4 Stroke 1997-Present. (See Model 27321 for High Thrust Models). Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha

MEGAWARE KEELGUARD SkegGuard 27341 Skeg Protector with Drain Hole - Protects Against Ramp Dragging - Mercury Mariner 40-50-60hp 2 & 4 Stroke, 3.44" Torpedo, 1991-Present

Boat Dock Guards
MEGAWARE KEELGUARD SkegGuard 27341 Skeg Protector with Drain Hole - Protects Against Ramp Dragging - Mercury Mariner 40-50-60hp 2 & 4 Stroke, 3.44" Torpedo, 1991-Present Cover
Buy on Amazon Find on eBay
Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
Designed for Specific Motors – SkegGuard 27341 FITS Mercury: 40-50-60HP 2 & 4 Stroke 1991-Present (See Model 27071 for Bigfoot, Command Thrust). Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha

MEGAWARE KEELGUARD FAQs

Yes, MEGAWARE KEELGUARD is a legitmate brand on Amazon. After conducting a comprehensive analysis of 1,888 customer reviews for MEGAWARE KEELGUARD products on Amazon, we have determined its average rating. Offering great value and satisfying quality, MEGAWARE KEELGUARD has achieved a respectable rating of 4.5 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from MEGAWARE KEELGUARD on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in MEGAWARE KEELGUARD and want to find more MEGAWARE KEELGUARD products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type MEGAWARE KEELGUARD in the search box and hit Enter to see the search results.
  3. Find and click the correct MEGAWARE KEELGUARD to go to the new page.
  4. Select the products you want in the MEGAWARE KEELGUARD buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more MEGAWARE KEELGUARD products.

We analyze millions of MEGAWARE KEELGUARD products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 59 MEGAWARE KEELGUARD products for sale, 19 of which were analyzed in detail and recommended to customers.

  1. Go to the MEGAWARE KEELGUARD page.
  2. Select the product you want in the MEGAWARE KEELGUARD buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Megaware Self-Adhesive DIY Keel Guard - Prolongs T..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the MEGAWARE KEELGUARD products are produced by MEGAWARE KEELGUARD INC.. The manufacturer provides MEGAWARE KEELGUARD with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the MEGAWARE KEELGUARD products, helping you make more informed buying decisions. We recommend best choices of the products from the MEGAWARE KEELGUARD brand, helping you make better shopping choices with less time and energy.

Similar Brands

VEVOR thumbnail
VEVOR
Attwood thumbnail
Attwood
TaylorMade thumbnail
TaylorMade
Pro Series thumbnail
Pro Series
Die-Matic thumbnail
Die-Matic
Max4out thumbnail
Max4out
Inflatable Sport Boats thumbnail
Inflatable Sport Boats
Gradient Fitness thumbnail
Gradient Fitness
Scotty thumbnail
Scotty
MarineNow thumbnail
MarineNow
Klymit thumbnail
Klymit
Dock Edge thumbnail
Dock Edge
Hull Hugr thumbnail
Hull Hugr
Doniks thumbnail
Doniks
Sebnux thumbnail
Sebnux
JY PERFORMANCE thumbnail
JY PERFORMANCE