Seamax feature image

Seamax

Review rating Review rating Review rating Review rating Review rating 4.3 Fact checked
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Seamax has 85 products for sale. Seamax products range in price from $39 to $4695, and the average price of all the products is about $766.2. You should take everyting into consideration before buying the products, after all, it is not a small expenditure for most consumers.

We found that most of the Seamax products are manufactured by Seamax Marine, Seamax Marine Canada, and SEAMAX MARINE. The manufacturers provide Seamax with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase Seamax products from the seller Seamax Marine USA. The brand holds an average rating of 4.3, testifying to its excellent reputation.

Seamax Best Sellers

Last Updated: Jan 12, 2025

Seamax Ocean430T Commercial Grade Inflatable Boat, 14ft. x 6.4ft, 5 Pontoon Chambers, Aluminum Floor, V Bottom, Max Support 35HP Motor, Coast Guard Standard Reflective Tapes, Multi-Purpose (Red)

Inflatable Rafts
Seamax Ocean430T Commercial Grade Inflatable Boat, 14ft. x 6.4ft, 5 Pontoon Chambers, Aluminum Floor, V Bottom, Max Support 35HP Motor, Coast Guard Standard Reflective Tapes, Multi-Purpose (Red) Cover
Buy on Amazon Find on eBay
Seamax Ocean430T Spec: Overall length 14ft, beam 6.4ft, inner dimensions L10.0ft x W3.1ft; Boat dry weight 250Lbs, carry 10 passengers, max loading 2159Lbs; Pontoon diameter 19.7 inches, 5 pontoon chambers and 1 keel chamber, Chambers with Hypalon type 4 layers overlapped seam, max pressure 3.6PSI (25kPa); Aluminum floor & reinforced V bottom; Short shaft 16”/ 82° & reinforced transom, Max 35HP motor, suggested 20-30HP; Red, Dark Gray & Black color to choose.
Manufacturing Standard: Commercial grade boat fabric for main construction; Four layers overlapped chamber seam structure (Feature Code: FOS); Keel Center Inner Reinforcement (KCR); Transom Stabilizer & Reinforcement Design (TSR); Hull Stabilizer Bar Structure (HSBS); Seamax special feature also including: Dual Heavy duty life lines; Heavy duty boat bumper around the boat and bottom; Heavy duty D-Ring & Towing Ring patches.
Features: Non-skid sectional aluminum floor system with side joiners, Fuel tank and battery box tie down fitting on the floor, Dual motor pads and heavy duty pontoon towing rings; Transom to pontoon adapter fully reinforced, marine sealant is applied which resists leakage. Multiple D-ring kits installed on the inside of the pontoons, 3 x front towing rings with tow line; Full size towing rings on transom, 6 x heavy duty handles, Oar lock set installed, 3 position seat receiver.
Accessories: 2 aluminum bench seats, 2 aluminum oars, 2 heavy duty boat carrying bags (for hull & floorboard); foot pump, boat repair kit & spare parts. Reflective Plates (optional) - US Coast Guard Approved 3M Reflective Sheeting; Color Code: White USCGFP30 (Sliver); Dimension 3”x10” / 7Pcs.
Seamax is a dedicated manufacturer of Seamax inflatable boats. The Ocean-T series is our top of the line model. It is the perfect inflatable boat for military, rescue and commercial applications, also offer great performance for recreational use & great value for the money.

Seamax Inflatable Boat Cover, C Series for Beam Range 5.3' to 5.7' (FEET), 5 Sizes fits Length 9.9' to 13.8' (FEET) (C330 - Max Length 10.8ft)

Boat Covers
Seamax Inflatable Boat Cover, C Series for Beam Range 5.3' to 5.7' (FEET), 5 Sizes fits Length 9.9' to 13.8' (FEET) (C330 - Max Length 10.8ft) Cover
Buy on Amazon Find on eBay
C SERIES INFLATABLE BOAT COVER - fits Beam between 5.3ft to 5.7ft. There are 5 models in C series: C300 fits Max Length 9.9ft boat; C330 fits Max Length 10.8ft boat; C360 fits Max Length 11.8ft boat; C390 fits Max Length 12.8ft boat; C420 fits Max Length 13.8ft boat. UNIVERSAL COVER - No matter which brand of boat you have, even if it is a RIB with a console, our universal cover should fit as long as your inflatable boat has a built-in transom.
MODEL CHECK LIST - If you have an Achilles, Mercury, Seamax or Zodiac inflatable boat, you can find your boat cover model from below Check List. Factor in the dimensions of additional features or boat style could affect the cover such as rounded pontoon cone end or tall center console. Please allow a few inches of additional length to fit your additional boat equipment when picking the cover.
MOTOR WELL STYLE & TRAILERABLE - Our boat cover should be able to cover your boat and the motor. Fabric Specs - Water and UV resistant; Density 600D/260g/SQM. Elastic string design for quick fitted and released, Multiple Tie-Down Loops built-in, free cover carrying bag included. Max trailer Road Speed 65km / hour (40mile / hour), additional tie-down core will be required.
FULL SUPPORT - Seamax inflatable boat covers have 6 series and overall 25 models. Our boat covers can fit the inflatable boats from 6.5ft to 20ft. Each series includes couple of sizes for different tube styles, width & boat length. Our boat cover sizes under a same series should be with the same width. The bow style will not affect the cover size in most cases.
If you pick a wrong size boat cover, that is no problem, we have our Express Replacement service to help you out from this issue. You can let us know your boat model, dimensions, pictures & with a short description. We will ship you a new model including an UPS return shipping waybill. Additional cost may be applied.

Seamax Deluxe Boat Launching Wheel System, Black Military Edition, 4 Positions and 4 Stages Removable and Adjustable Legs, 14" Pneumatic Wheels. Max Support Water Craft Weight 600Lbs

Boat Steering Wheels
Seamax Deluxe Boat Launching Wheel System, Black Military Edition, 4 Positions and 4 Stages Removable and Adjustable Legs, 14" Pneumatic Wheels. Max Support Water Craft Weight 600Lbs Cover
Buy on Amazon Find on eBay
BENEFIT of its new design - With the 4 stages of length and 4 wheel arm position, the dolly can be adjusted while afloat in the boat, leaving or coming into the dock. The dolly system can also bring different performance positions for boat launching. The wheel arm length increment is 2.5” per stage. Plus the wheel's diameter, the range of length is 23 - 30 inches.
The wheel arm has 60° and 90° locking position to move up and down. The upper-60° position can free up more space on the top and side of the transom. The lower 60° position lets the wheels run at the same level as the prop, and thus turns the wheels as a prop guard when boat launching.
The transom bracket installation area is about 8 x 3 inches. Shorter transom bracket design brings more possible installation for all type of boats with different transom. The brackets can be installed at the waterline top position, so to avoid the water comes into the screw holes. We had developed a profile for the transom bracket in 2019. Now the bracket only requires 2 bolts to install. Easier to put it on your boat with the same loading capacity.
TRIPLE heavy duty, TRIPLE quality! Product is made by Seamax Canada with 2 years limited warranty and 100% Customer Satisfaction guaranteed! The Quick Operation Features of the Deluxe Boat Dolly include - spring load locking pin for wheel arm position adjustment; solid spring load buttons for wheel arm length adjustment; and quick released lock pin for wheel arm and wheel bearing.
Our new tires are now 14” in diameter and about 4” wide. They are made of 4 ply reinforced vehicle grade natural rubber which holds up well against UV rays, heat and salt water for up to ten years. To prevent air loss, we use an advanced butyl inner tube for our wheels with an “L” style cooper air valve. The rim is made of reinforced nylon with a 1” diameter hole for the axle with NO bearing as this product is made for marine use. These high quality marine grade tires and rims will last you for

Seamax Universal Inflatable Boat Bench Seat Cushion and Detachable Seat Bag with Sunlitec 3-Layers Fabric and Reflective Edges (Size C - 38" for 360-390 Boats)

Boating Seat Cushions
Seamax Universal Inflatable Boat Bench Seat Cushion and Detachable Seat Bag with Sunlitec 3-Layers Fabric and Reflective Edges (Size C - 38" for 360-390 Boats) Cover
Buy on Amazon Find on eBay
Built in 6 different sizes to fit almost all inflatable boats on the market. Seat cushion is made from marine grade foam 8.5” wide & 1.5” thick and has a detachable under seat storage bag.
3 Velcro pads for easy and quick installation of the cushion to the boat bench seat. Both sides of the cushion have a zipper to attach the under-seat storage bag. Storage bag has a shoulder strap for carrying on land.
2 individual pockets on the front plus 1 cup holder pot. Space-Max design of the under-seat bag is good for keeping your large items such as tackle box, umbrella and safety kit.
Air vents located on bottom and side of bag. Reflective line the on cushion and bag for night vision.
Size Check List: Size A - Suitable for Boat Size 7-9ft Dimensions: Cushion L30” x W8.5” x H1.5” / Bag: L22” x W8.5” x H9.5” Size B - Suitable for Boat Size 9-11ft Dimensions: Cushion L34” x W8.5” x H1.5” / Bag: L26” x W8.5” x H10” Size C - Suitable for Boat Size 11-13ft Dimensions: Cushion L38” x W8.5” x H1.5” / Bag: L30” x W8.5” x H11” Size D - Suitable for Boat Size 13-15ft Dimensions: Cushion L42” x W8.5” x H1.5” / Bag: L34” x W8.5” x H12”

Seamax Inflatable Boat Cover, D Series for Beam Range 5.8' to 6.4' (FEET), 5 Sizes fits Length 12.2' to 16.5' (FEET) (D430 - Max Length 14ft)

Boat Covers
Seamax Inflatable Boat Cover, D Series for Beam Range 5.8' to 6.4' (FEET), 5 Sizes fits Length 12.2' to 16.5' (FEET) (D430 - Max Length 14ft) Cover
Buy on Amazon Find on eBay
MODEL CHECK LIST - If you have an Achilles, Mercury, Seamax or Zodiac inflatable boat, you can find your boat cover model from below Check List. Factor in the dimensions of additional features or boat style could affect the cover such as rounded pontoon cone end or tall center console. Please allow a few inches of additional length to fit your additional boat equipment when picking the cover.
MOTOR WELL STYLE & TRAILERABLE - Our boat cover should be able to cover your boat and the motor. Fabric Specs - Water and UV resistant; Density 600D/260g/SQM. Elastic string design for quick fitted and released, Multiple Tie-Down Loops built-in, free cover carrying bag included. Max trailer Road Speed 65km / hour (40mile / hour), additional tie-down core will be required.
FULL SUPPORT - Seamax inflatable boat covers have 6 series and overall 25 models. Our boat covers can fit the inflatable boats from 6.5ft to 20ft. Each series includes couple of sizes for different tube styles, width & boat length. Our boat cover sizes under a same series should be with the same width. The bow style will not affect the cover size in most cases.
If you pick a wrong size boat cover, that is no problem, we have our Express Replacement service to help you out from this issue. You can let us know your boat model, dimensions, pictures & with a short description. We will ship you a new model including an UPS return shipping waybill. Additional cost may be applied.

Seamax Sup 16DB PRO Double Stage 16PSI Electric Air Pump with Built-in Battery for Inflatable SUP and Boat, Intelligent Firmware with Built-in Temperature Sensor and Timer

Seamax Sup 16DB PRO Double Stage 16PSI Electric Air Pump with Built-in Battery for Inflatable SUP and Boat, Intelligent Firmware with Built-in Temperature Sensor and Timer Cover
Buy on Amazon Find on eBay
[EASY TO POWER] : Thanks to the intelligent control system and its newly designed power control unit, the air pump is great to use with the inflatable boat, SUP, and tent. This DC electric air pump can be powered by its built-in 6AH lithium battery after charging or through a standard extremal 12V charger socket in a vehicle. It can quickly reach and automatically stop at the user's pre-set air pressure.
[NEW AND SMART] : Our Seamax pump has AI smart monitoring feature to help the user reach the highest efficiency pumping. When the pump starts to inflate, the computer monitors the real-time pressure every second, based on our Self-Developed smart pump formula program, it can find the pump the best timing to switch to 2nd The computer also monitors the pump's internal temperature and continued working time, Auto Stop Protection feature has been built-in to protect your pump.
[MORE COMPATIBLE] : The valve connector with the hose is suitable for SUPs equipped with HR (Halkey-Roberts), Bravo, Naru, or similar type air valves. This kind of air valve has a turning pin or pressing down the pin in the middle to control the valve's Open & Closed position. 3 silicon O-Rings to choose from and keep the connection best airtight. More valve adaptors are available and even fit the Leafield C7 or D7 air valve.
[MORE COMPACT AND MORE FEATURES] : Fully support Inflation and Deflation; 1st stage max speed 350L/min; 2nd stage max speed 70L/min, Pressure setting increments 0.5 PSI and Max 16PSI.Built-in LED flashlight and 2x USB 5V charging ports, 6Lbs Super lightweight, the pump comes with a storage box to keep the travel charger and car 12Vadadptor, 2 ways to use the pump and charge the battery. A great design travel case to keep the pump and accessories in order.
[NOTE OF FIRST TIME USE] : Fully charge the battery before use. One charge can inflate up to 3x SUPs or 3x 12ft Inflatable Boat. Don't leave the pump in the dusty ground when pumping. The Power Button needs to Press & Hold for 2 seconds to turn on the air pump. The pump will go to sleep mode (turn off) when no use for 2 minutes.
[SUPPORT AND NOT SUPPORT] : This pump can support all Inflatable SUPs, inflatable boats, and Inflatable Kites. but our pump may not support the inflatable kayak with the Boston air valve except customize the end fitting.

Seamax Deluxe 4 by 4 Boat Launching Dolly with 14" Wheels System, Commercial Grade Quality for Inflatable Boat and Aluminum Boat Max Loading 600Lb

Seamax Deluxe 4 by 4 Boat Launching Dolly with 14" Wheels System, Commercial Grade Quality for Inflatable Boat and Aluminum Boat Max Loading 600Lb Cover
Buy on Amazon Find on eBay
Designed by Seamax and now it is the 2nd edition released in 2019. Seamax Deluxe Boat Launching Wheels system is made by the marine grade T6 aluminum alloy with CNC processing and shiny looking anodized coating against the corrosion. Thus the product is good for saltwater use. Small parts are all made by solid stainless steel and reinforced Nylon. The air filled tire is lab-tested (1000 LBS), and is great to support a MAX loading of 600 LBS in all condition.
BENEFIT of its new design - With the 4 stages of length and 4 wheel arm position, the dolly can be adjusted while afloat in the boat, leaving or coming into the dock. The dolly system can also bring different performance positions for boat launching. The wheel arm length increment is 2.5” per stage. Plus the wheel's diameter, the range of length is 23 - 30 inches. It is a great add-on for inflatable, aluminum and fiberglass boats.
The wheel arm has 60° and 90° locking position to move up and down. The upper-60° position can free up more space on the top and side of the transom. The lower 60° position lets the wheels run at the same level as the prop, and thus turns the wheels as a prop guard when boat launching.
The transom bracket installation area is about 8 x 3 inches. Shorter transom bracket design brings more possible installation for all type of boats with different transom. The brackets can be installed at the waterline top position, so to avoid the water comes into the screw holes. We had developed a profile for the transom bracket in 2019. Now the bracket only requires 2 bolts to install. Easier to put it on your boat with the same loading capacity.
TRIPLE heavy duty, TRIPLE quality made! Product is made by Seamax Canada with 2 years limited warranty and 100% Customer Satisfaction guaranteed! The Quick Operation Features of the Deluxe Boat Dolly include - spring load locking pin for wheel arm position adjustment; solid spring load buttons for wheel arm length adjustment; and quick released lock pin for wheel arm and wheel bearing.

Seamax SUP20D 20PSI Double Stage Electric Air Pump for Inflatable SUP and Boat, New Version Intelligent Firmware with Built-in Temperature Sensor and Voltage Protection

Seamax SUP20D 20PSI Double Stage Electric Air Pump for Inflatable SUP and Boat, New Version Intelligent Firmware with Built-in Temperature Sensor and Voltage Protection Cover
Buy on Amazon Find on eBay
Seamax SUP20D PRO Signature Edition air pump is an upgraded version in our SUP pumps family. Programmed intelligent proactive digital controller, voltage sensor, temperature sensor, and overheat protection for managed dual stage inflation. Backlit LCD display and audible indicator to provide real-time working status to users. Major parts made of marine grade engineered ABS and Nylon material for durability. Low power consumption, 5-10A (60-120W). Wide range of working temperature and humidity.
1st stage max speed 350L/min; 2nd stage max speed 70L/min, Pressure setting increments 0.5 PSI and support up to 20PSI. Real time pressure monitoring and auto stop once selected pressure reached; High efficient dual air inflators controlled by digital pressure controller module; Supported working range 0.5 - 20 PSI (20 PSI = 1.378 Bar =138 Kilo-Pascal); accurateness 0.01 PSI.
Built-in sand filter for air intake & pump cooling system; Built-in outtake chamber for noise reduce and better efficiency. One-way diaphragm valve to protect the inflator and maximize the speed. Designed for inflatable boat, SUP and paddle board; About 10 minutes to inflate a 12ft SUP or a 9ft inflatable boat (3.5 PSI) with air mat floor (12 PSI) fast and easy.
Super light weight 4Lbs and Dimension only 10”x7”x7” with easy carry handle; Reinforced 4ft air hose. Perfect handy size for pumping boats, SUPs and Paddleboards. 360 degree free turning main air hose connector provides flexible pumping positions. Screw-in style adaptors provide perfect air tight.
The pump's 12V DC connector (Car Cigarette Lighter connector) has a built-in 12A fuse. Cigarette lighter spare fuse is provided with the package. Pump user manual is included in the package and downloadable from our website. Regardless daily use during the season or occasionally use in a year, this high-quality air pump can always do a good job.

Seamax 12V PowerMax 2HP Brushless Trolling Motor, Stepless Speed Control, Equal to 65 Lb Thrust, 35 Inch Shaft

Trolling Motors
Seamax 12V PowerMax 2HP Brushless Trolling Motor, Stepless Speed Control, Equal to 65 Lb Thrust, 35 Inch Shaft Cover
Buy on Amazon Find on eBay

Seamax Commercial Grade 2 Part Marine Adhesive for All PVC and Hypalon Inflatable Boats, Sealed in Aluminum Bottles for Long Term Storage (PVC 250ml 2 Part Glue, with Black Material)

Boat Cleaners
Seamax Commercial Grade 2 Part Marine Adhesive for All PVC and Hypalon Inflatable Boats, Sealed in Aluminum Bottles for Long Term Storage (PVC 250ml 2 Part Glue, with Black Material) Cover
Buy on Amazon Find on eBay
Mix 5% hardener (treatment) to the glue before use. Maximum add 10% hardener when in Cold Weather 10C-15C or High Humidity 50-75%. Do NOT exceed a mixture of 10% to the glue. M.E.K. is the thinner for PVC glue. If the glue hardens, you can add up to 10% MEK to the glue to reactivate the glue. Glue mixed with hardener can be kept for up to 6 hours.
Use a small painting brush to apply 1-3 layer(s) glue on both material surfaces. Wait 5 minutes between applications to allow glue to dry and then attach the two pieces of material together. Once you have applied the patch, work from the center out with something like a teaspoon to force out any air bubbles and then apply pressure to the repaired area for at least 24 hours. Wait 48 hours for the glue to cure before using.
PVC Glue can be used as one part. For a better result, please do 2 Part glue (glue and hardener) to ensure the overall quality of the repair and extend the life time of the bonding. For any repairs related to air leaks, please use 2 Part Glue. Glue and hardener sealed in the bottles can be kept up to 3 years
Instruction of Glue Layer applied: 1-2 layers on new fabric surface; 2-3 layers on old fabric surface; 3-4 layers for wood or plywood surface; 2-3 layers for parts or aluminum surface. (The fabric of Hypalon boat, it must has a coating layer on the fabric, sanding the boat fabric to get rid of this coating is a must before gluing.)
Only mix the amount of glue you require for the repair. Seal the bottle right away and store it in a cool area so that it may be used again. If the hardener turns to crystals or gets sticky, it is no longer usable. To clean the area that needs to be repaired, use Methyl Hydrate, Acetone or MEK.

Seamax Portable Boat Carry and Launch Hand Dolly Set with 16” Pneumatic Wheels

Boat Trailers
Seamax Portable Boat Carry and Launch Hand Dolly Set with 16” Pneumatic Wheels Cover
Buy on Amazon Find on eBay
This lightweight adjustable universal boat hand dolly is equipped with a retracted main pole from 8' to fully extended 10', angle flexible rear bunks, and position adjustable front bow support bunk to carry the boat. The boat hand dolly weighs about 55 Lbs including two 16” Pneumatized wheels. The disassembled boat hand dolly can be fit into an easy carrying box with approximate 50" x 46" x 9" dimensions.
Seamax Boat Hand Dolly is made by steel with power coating. Quick released lock pin to change the dolly tongue stages: 8ft, 9ft and fully extended 10ft. Rear Bunks Width 38”. Dolly Payload 250 Lbs for boat and motor. Suggested tire air pressure is 15 PSI, max 20 PSI. It is good for an inflatable boat up to 13ft, an aluminum or fiberglass boat up to 14ft, and a small sail boat up to 15ft.
Optional hitch attachment is available for off-road towing with an ATV, golf cart, and other utility vehicle. Max towing speed is 10km / hour. It is great for launching your boat to the water quickly. 10 minutes to assemble or disassemble. This product has been selling to many many places including sail club or yacht club.
Tire inflation: Dolly tires may not be fully inflated when shipping. Give only 15-20 PSI max air pressure in room temperature before using. Best to use portable type digital control air pump to avoid over inflation issue.
The boat hand dolly is suitable for many use cases. For example, carry your boat from the parking lot to the boat launching lane in a park. Carry your boat from your backyard to the water. Move your boat within the yacht club or sail club. Users shall check the max pay load (250 Lbs) and speed (10 KM/Hour) requirements. The boat hand dolly is NOT for regular road / highway use. Boat hand dolly user cannot tow this hand dolly on the road or highway by vehicle for any of purposes.

Seamax Sunlitec Front Accessory Storage Bow Bag for Inflatable Boat, with Reflective Line - Size C for 15-20ft Boat

Marine Dry Bags
Seamax Sunlitec Front Accessory Storage Bow Bag for Inflatable Boat, with Reflective Line - Size C for 15-20ft Boat Cover
Buy on Amazon Find on eBay
4 Solid nylon webbing straps to install the Bow Bag via existing boat D rings, life line or boat handles. Fits virtually all brands of inflatable boats. Quick release buckles on straps with a front carry handle.
Multiple storage pockets with water resistant marine zipper, one large pocket at the top to keep your map or your foot pump, 2 pockets on the front to keep your food and drinks and one pocket inside the bag to keep your boating documents, phone or wallet.
Hidden air vents located on the bottom and side wall to keep your items safe and dry.
Reflective line for night vision

Seamax Commercial Grade 2 Part Marine Adhesive 250ml for Hypalon Inflatable Boats, Sealed in Aluminum Bottles for Long Term Storage, Factory Condition for Repairs or Installation

Boat Cleaners
Seamax Commercial Grade 2 Part Marine Adhesive 250ml for Hypalon Inflatable Boats, Sealed in Aluminum Bottles for Long Term Storage, Factory Condition for Repairs or Installation Cover
Buy on Amazon Find on eBay
Mix 5% hardener (treatment) to the glue before use. Maximum add 10% hardener when in Cold Weather 10C-15C or High Humidity 50-75%. Do NOT exceed a mixture of 10% to the glue. M.E.K. is the thinner for PVC glue. If the glue hardens, you can add up to 10% MEK to the glue to reactivate the glue. Glue mixed with hardener can be kept for up to 6 hours.
Use a small painting brush to apply 1-3 layer(s) glue on both material surfaces. Wait 5 minutes between applications to allow glue to dry and then attach the two pieces of material together. Once you have applied the patch, work from the center out with something like a teaspoon to force out any air bubbles and then apply pressure to the repaired area for at least 24 hours. Wait 48 hours for the glue to cure before using.
PVC Glue can be used as one part. For a better result, please do 2 Part glue (glue and hardener) to ensure the overall quality of the repair and extend the life time of the bonding. For any repairs related to air leaks, please use 2 Part Glue. Glue and hardener sealed in the bottles can be kept up to 3 years
Instruction of Glue Layer applied: 1-2 layers on new fabric surface; 2-3 layers on old fabric surface; 3-4 layers for wood or plywood surface; 2-3 layers for parts or aluminum surface. (The fabric of Hypalon boat, it must has a coating layer on the fabric, sanding the boat fabric to get rid of this coating is a must before gluing.)
Only mix the amount of glue you require for the repair. Seal the bottle right away and store it in a cool area so that it may be used again. If the hardener turns to crystals or gets sticky, it is no longer usable. To clean the area that needs to be repaired, use Methyl Hydrate, Acetone or MEK.

Seamax Ocean380T 12.5 Feet Commercial Grade Inflatable Boat, 5 Pontoon Chambers, Aluminum Floor, V Bottom, Max Support 25HP Motor, Coast Guard Standard Reflective Tapes, Multi-Purpose (Dark Grey)

Inflatable Rafts
Seamax Ocean380T 12.5 Feet Commercial Grade Inflatable Boat, 5 Pontoon Chambers, Aluminum Floor, V Bottom, Max Support 25HP Motor, Coast Guard Standard Reflective Tapes, Multi-Purpose (Dark Grey) Cover
Buy on Amazon Find on eBay
Seamax Ocean380T Spec: Overall length 12.5ft, beam 5.7ft, inner dimensions L9.0ft x W2.8ft; Boat dry weight 210Lbs, carry 5 passengers, max loading 1432Lbs; Pontoon diameter 17.5 inches, 5 pontoon chambers and 1 keel chamber, Chambers with Hypalon type 4 layers overlapped seam, max pressure 3.6PSI (25kPa); Aluminum floor & reinforced V bottom; Short shaft 16”/ 82° & reinforced transom, Max 25HP motor, suggested 15-20HP.
Manufacturing Standard: Commercial grade boat fabric for main construction; Four layers overlapped chamber seam structure (Feature Code: FOS); Keel Center Inner Reinforcement (KCR); Transom Stabilizer & Reinforcement Design (TSR); Hull Stabilizer Bar Structure (HSBS); Seamax special feature also including: Dual Heavy duty life lines; Heavy duty boat bumper around the boat and bottom; Heavy duty D-Ring & Towing Ring patches.
Features: Non-skid sectional aluminum floor system with side joiners, Fuel tank and battery box tie down fitting on the floor, Dual motor pads and heavy duty pontoon towing rings; Transom to pontoon adapter fully reinforced, marine sealant is applied which resists leakage. Multiple D-ring kits installed on the inside of the pontoons, 3 x front towing rings with tow line; Full size towing rings on transom, 4 x heavy duty handles, Oar lock set installed, 2 position seat receiver.
Accessories: 2 aluminum bench seats, 2 aluminum oars, 2 heavy duty boat carrying bags (for hull & floorboard); foot pump, boat repair kit & spare parts. Reflective Plates (optional) - US Coast Guard Approved 3M Reflective Sheeting; Color Code: White USCGFP30 (Sliver); Dimension 3”x10” / 5Pcs.
Seamax is a dedicated manufacturer of Seamax inflatable boats. The Ocean-T series is our top of the line model. It is the perfect inflatable boat for military, rescue and commercial applications, also offer great performance for recreational use & great value for the money.

Seamax Commercial Grade 2 Part Marine Adhesive for All PVC Inflatable Boats, Sealed in Aluminum Bottles for Long Term Storage (PVC 250ml 2 Part Glue, Glue Only)

Boat Cleaners
Seamax Commercial Grade 2 Part Marine Adhesive for All PVC Inflatable Boats, Sealed in Aluminum Bottles for Long Term Storage (PVC 250ml 2 Part Glue, Glue Only) Cover
Buy on Amazon Find on eBay
Mix 5% hardener (treatment) to the glue before use. Maximum add 10% hardener when in Cold Weather 10C-15C or High Humidity 50-75%. Do NOT exceed a mixture of 10% to the glue. M.E.K. is the thinner for PVC glue. If the glue hardens, you can add up to 10% MEK to the glue to reactivate the glue. Glue mixed with hardener can be kept for up to 6 hours.
Use a small painting brush to apply 1-3 layer(s) glue on both material surfaces. Wait 5 minutes between applications to allow glue to dry and then attach the two pieces of material together. Once you have applied the patch, work from the center out with something like a teaspoon to force out any air bubbles and then apply pressure to the repaired area for at least 24 hours. Wait 48 hours for the glue to cure before using.
PVC Glue can be used as one part. For a better result, please do 2 Part glue (glue and hardener) to ensure the overall quality of the repair and extend the life time of the bonding. For any repairs related to air leaks, please use 2 Part Glue. Glue and hardener sealed in the bottles can be kept up to 3 years
Instruction of Glue Layer applied: 1-2 layers on new fabric surface; 2-3 layers on old fabric surface; 3-4 layers for wood or plywood surface; 2-3 layers for parts or aluminum surface.
Only mix the amount of glue you require for the repair. Seal the bottle right away and store it in a cool area so that it may be used again. If the hardener turns to crystals or gets sticky, it is no longer usable. To clean the area that needs to be repaired, use Methyl Hydrate, Acetone or MEK.

Seamax Ocean500T 16.5 Feet Commercial Grade Inflatable Boat, Max 15 Passengers and 50HP Rated (Black)

Inflatable Rafts
Seamax Ocean500T 16.5 Feet Commercial Grade Inflatable Boat, Max 15 Passengers and 50HP Rated (Black) Cover
Buy on Amazon Find on eBay
Seamax Ocean500T Spec: Overall length 16.5ft, beam 7.2ft, inner dimensions L12ft x W3.6ft; Boat dry weight 350Lbs, carry 15 passengers, max loading 3260Lbs; Pontoon diameter 22 inches, 5 pontoon chambers and 1 keel chamber, Chambers with Hypalon type 4 layers overlapped seam, max pressure 3.6PSI (25kPa); Aluminum floor & reinforced V bottom; Long Shaft 21”/ 82° & reinforced transom, Max 50HP motor, suggested 30-40HP; Red, Dark Gray color and Black to choose.
Manufacturing Standard: Commercial grade boat fabric for main construction; Four layers overlapped chamber seam structure (Feature Code: FOS); Keel Center Inner Reinforcement (KCR); Transom Stabilizer & Reinforcement Design (TSR); Hull Stabilizer Bar Structure (HSBS); Seamax special feature also including: Dual Heavy duty life lines; Heavy duty boat bumper around the boat and bottom; Heavy duty D-Ring & Towing Ring patches.
Features: Non-skid sectional aluminum floor system with side joiners, Fuel tank and battery box tie down fitting on the floor, Transom motor pad and heavy duty pontoon towing rings; Transom to pontoon adapter fully reinforced, marine sealant is applied which resists leakage. Multiple D-ring kits installed on the inside of the pontoons, 3 x front towing rings with tow line; Full size towing rings on transom, 6 x heavy duty handles, Oar lock set installed, 3 position seat receiver.
Accessories: 2 aluminum bench seats, 2 aluminum oars, 2 heavy duty boat carrying bags (for hull & floorboard); foot pump, boat repair kit & spare parts. Reflective Plates (optional) - US Coast Guard Approved 3M Reflective Sheeting; Color Code: White USCGFP30 (Sliver); Dimension 3”x10” / 9Pcs.
Seamax is a dedicated manufacturer of Seamax inflatable boats. The Ocean-T series is our top of the line model. It is the perfect inflatable boat for military, rescue and commercial applications, also offer great performance for recreational use & great value for the money.

Seamax New Heavy Duty Ocean320 10.5ft Inflatable Boat with Aluminum Floor, V Bottom (Dark Grey)

Inflatable Rafts
Seamax New Heavy Duty Ocean320 10.5ft Inflatable Boat with Aluminum Floor, V Bottom (Dark Grey) Cover
Buy on Amazon Find on eBay
Overall length 10.5ft, beam 5ft, inner dimension L 7.6ft x W 2.2ft, pontoon diameter 16.5 inches; 3 pontoon chambers and 1 keel chamber for V hull; max. pressure 3.6PSI (25kPa); boat dry weight 130Lbs. max. loading 870Lbs, 4 passenger, boat rated 15HP motor and with 15” Short shaft transom; heavy duty aluminum floor. Available in Red and Dark Gray color. Most Davit system is well supported.
New boat finished with 4 layers and triple overlapped chamber seam, double thermal welded structure with industry best 6 years guarantee.
Marine Grade PVC coating fabric for pontoon construction; Thicker 1.2mm material for entire boat bottom, Seamax special reinforcement design for keel, transom underneath and pontoon bottom. Heavy-duty life line around the entire boat, and Secondary life line inside of the boat; Solid 1" thick transom made by top grade marine birch plywood; Heavy-duty bumper around the boat and keel bottom.
bench seat(s), 2 x aluminum oars, 2 x , heavy duty boat carrying bags (for hull & floorboard); 2000 lbs capacity front towing cable; foot pump, boat repair kit and spare parts kit. Seamax is a dedicated manufacturer of Seamax inflatable boats, and the Seamax Ocean series are built with the highest construction standards. The Ocean series offer great performance for fishing, hunting and commercial applications. The boat is heavy-duty and worth of the money invested.

Seamax EZ Load Boat Launching Wheels Set for Inflatable Boat & Aluminum Boat, Support MAX 500Lbs Loading with 12" Pneumatic Tire & 2 Height Position

Seamax EZ Load Boat Launching Wheels Set for Inflatable Boat & Aluminum Boat, Support MAX 500Lbs Loading with 12" Pneumatic Tire & 2 Height Position Cover
Buy on Amazon Find on eBay
Seamax Easy Load Boat Launching Wheels Set is designed by Seamax Canada, made by hardest marine grade T6 aluminum alloy with CNC processing; Shiny looking anodized coating on all aluminum parts, product is good for saltwater using; Small parts are all made by solid stainless steel. Lab 1000Lbs tested, support MAX 500Lbs loading in all condition, good for inflatable boats, aluminum boats and fiberglass boats.
This system is designed for boats with transom, the length of the boat should not exceed16 FT & total weight within 500 Lbs. These transom wheels should only be installed by an adult with some experience in working with tools. To install the wheel set properly, you will need to drill 4 holes (5/16”) in the transom for the mounting. Addition reinforcement may be required on some aluminum transom. And you can use marine sealant and suggested Sikaflex 291.
Benefit from its new Push Button design & max 3 stages wheel arm, the system can be adjusted while afloat in the boat leaving or coming into, it can also bring different performance position for boat launching. The wheel arm length increment is 2.5” per stage, plus the wheel's diameter, the range of length is 22-28 inches.
Tire inflation: Dolly tires may not be fully inflated when shipping; please only give 15-20 PSI pressure at room temperature before using. Best to use portable type digital air pump in case tire over inflated. Tire over inflated will cause damage and the warranty is not covered. Dual wheel kit is available for this dolly for heavy loading application.
Maintenance: Wash it after using from salt water or sandy beach. Check tire pressure before every using. Don't store the wheels under the sun or beside the heat to maximize its life time. Take the wheel arm off from the transom bracket when store your boat. Lube the spring load dolly system is necessary. Keep the lock pin on the dolly bracket. Manufacturer 2 years Parts Limited Warranty within USA & Canada. 30 days free replacement on any defective ransom wheel sets.

Seamax 7L Single Stage Foot Pump for Inflatable Boats, Max 3.6 PSI Support Inflation and Deflation

Seamax 7L Single Stage Foot Pump for Inflatable Boats, Max 3.6 PSI Support Inflation and Deflation Cover
Buy on Amazon Find on eBay
Standard foot pump with HR adapter for Halkey Roberts, Bravo, and similar types air valves
Strong plastic inflator. 5 Feet air hose.
suitable for small inflatable boats and dingys.

Seamax Commerical Grade 2 Parts 250ml Marine Adhesive Hypalon Inflatable Boats, Sealed in Aluminum Bottles for Long Term Storage and Best Result

Boat Cleaners
Seamax Commerical Grade 2 Parts 250ml Marine Adhesive Hypalon Inflatable Boats, Sealed in Aluminum Bottles for Long Term Storage and Best Result Cover
Buy on Amazon Find on eBay
Mix 5% hardener (treatment) to the glue before use. Maximum add 10% hardener when in Cold Weather 10C-15C or High Humidity 50-75%. Do NOT exceed a mixture of 10% to the glue. If the glue hardens, you can add up to 10% MEK to the glue to reactivate the glue. Glue mixed with hardener can be kept for up to 6 hours.
Use a small painting brush to apply 1-3 layer(s) glue on both material surfaces. Wait 5 minutes between applications to allow glue to dry and then attach the two pieces of material together. Once you have applied the patch, work from the center out with something like a teaspoon to force out any air bubbles and then apply pressure to the repaired area for at least 24 hours. Wait 48 hours for the glue to cure before using.
For a better result, please do 2 Part glue (glue and hardener) to ensure the overall quality of the repair and extend the life time of the bonding. For any repairs related to air leaks, please use 2 Part Glue. Glue and hardener sealed in the bottles can be kept up to 3 years
Instruction of Glue Layer applied: 1-2 layers on new fabric surface; 2-3 layers on old fabric surface; 3-4 layers for wood or plywood surface; 2-3 layers for parts or aluminum surface. (The fabric of Hypalon boat, it must has a coating layer on the fabric, sanding the boat fabric to get rid of this coating is a must before gluing.)
Only mix the amount of glue you require for the repair. Seal the bottle right away and store it in a cool area so that it may be used again. If the hardener turns to crystals or gets sticky, it is no longer usable. To clean the area that needs to be repaired, use Methyl Hydrate, Acetone or MEK.

Seamax FAQs

Yes, Seamax is a legitmate brand on Amazon. After conducting a comprehensive analysis of 3,281 customer reviews for Seamax products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Seamax has achieved a respectable rating of 4.3 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Seamax on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Seamax and want to find more Seamax products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Seamax in the search box and hit Enter to see the search results.
  3. Find and click the correct Seamax to go to the new page.
  4. Select the products you want in the Seamax buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Seamax products.

We analyze millions of Seamax products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 85 Seamax products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Seamax page.
  2. Select the product you want in the Seamax buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Seamax Ocean430T Commercial Grade Inflatable Boat,..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the Seamax products are produced by Seamax Marine, Seamax Marine Canada, and SEAMAX MARINE. The manufacturers provide Seamax with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the Seamax products, helping you make more informed buying decisions. We recommend best choices of the products from the Seamax brand, helping you make better shopping choices with less time and energy.

Similar Brands

Budge thumbnail
Budge
SEACHOICE thumbnail
SEACHOICE
Outdoor Products thumbnail
Outdoor Products
NordicTrack thumbnail
NordicTrack
Marcy thumbnail
Marcy
YOSUDA thumbnail
YOSUDA
Exerpeutic thumbnail
Exerpeutic
Cubii thumbnail
Cubii
Teeter thumbnail
Teeter
Bowflex thumbnail
Bowflex
Star Brite thumbnail
Star Brite
Klymit thumbnail
Klymit
303 Products thumbnail
303 Products
Frelaxy thumbnail
Frelaxy
RVMasking thumbnail
RVMasking
Boat Bling thumbnail
Boat Bling