DIYmalls

4.3 Fact checked

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, DIYmalls has 189 products for sale. DIYmalls products range in price from $8.95 to $47.98, and the average price of all the products is about $27.38.

We found that most of the DIYmalls products are manufactured by DIYmalls - Heltec Automation and Heltec Automation. The manufacturers provide DIYmalls with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase DIYmalls products from the seller DIYmalls. The brand holds an average rating of 4.3, testifying to its excellent reputation.

DIYmalls Best Sellers

Last Updated: Jan 12, 2025

DIYmalls 2.8" ESP32-2432S028R ESP32 Display ILI9341 Resistive Touchscreen 240x320 TFT LCD Module ESP-WROOM-32 Development Board + Acrylic Case for Arduino IDE

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

ESP32-2432S028R display is a special combination of ESP-WROOM-32 ESP32 development board + 2.8 inch resistive touch screen ILI9341 module.

ESP32-2432S028R module supports uploading code to the 2.8 inch yellow display esp 32 via IDE or esp32 flash tool.

The 2.8 inch esp32 display has a strict requirement in voltage. Please power it via 5V charger, instead of PC even though your PC is 5V.

Comes with 1pcs esp 32 display 2.8 inch module, 1pcs dupont female to 1.25mm wire, 1pcs USB 2.0 to micro USB data cable 1 meter, 1pcs acrylic case.

User manual available if do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".

DIYmalls 915MHz LoRa ESP32 OLED Board V3 Type-C SX1262 8MB Flash + LoRa Antenna U.FL to SMA for Arduino LoraWan IOT (Pack of 2), not Compatible with LoRa 32 V2

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

You will receive, 2pcs 915MHz esp32 lora V3, 2pcs 915mhz lora antenna,and 2pcs 2pin 1.25mm connector.

The newly LoRa V3 version has the same pin sequence and function as the V2 version. But the V3 change micro USB port to be type C.

LoRa board 915mhz comes unassembled, soldering required by you, not equipped with lithium battery.

You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.

If you want to use the lora 32 v3 board with case, please buy another smaller 915 lora antenna because this lora 915 antenna is bigger than the lora case.

DIYmalls 3.5" inch ESP32 Display ESP-WROOM-32 Capacitive Touch Screen TFT LCD Module 320x480 ST7796 ESP32-3248S035C Development Board for Arduino IDE

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

Combination of ESP-WROOM-32 ESP32 development board + 3.5 inch display capacitive touch.

2 ways to upload code to the 3.5 inch touchscreen, via IDE or esp32 flash tool.

Used for remote environment data collection, remote data fusion, remote parameter settings, and other IoT filed applications

Comes with 1pcs esp32 display 3.5 inch, 1pcs USB 2.0 to micro USB data cable 1 meter, 1pcs dupont female to 1.25mm wire.

User manual available if do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".

DIYmalls 915MHz ESP32 LoRa OLED Board V3 SX1262 Type-C + LoRa V3 Case + 915MHz Antenna for Arduino LoRawan IOT (Pack of 2), not Compatible with LoRa V2

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

ESP32 LoRa V3 is not compatible with the LoRa 32 V2. The lora case is only designed for lora v3 board.

You can power lora v3 board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.

The lora case has a strict requirement in size of lora antenna fitting with it. It means not all antenna is suitable for it.

LoRa oled board v3 comes unassembled, soldering required by you, not equipped with lithium battery.

You will receive 2pcs 915MHz esp32 lora oled board V3 with 1.25mm-2p cable, 2pcs lora v3 case, and 2pcs 915mhz lora antenna.

If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".

DIYmalls 2.8" inch ESP32 Display Capacitive Touchscreen ESP-32 Screen TFT LCD Module ESP-WROOM-32 Development Board ST7789 240x320 JC2432W328C for Arduino IDE

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

JC2432W328C module is the combination of ESP-WROOM-32 ESP-32 development board + 2.8" capacitive touchscreen display.

Support uploading code to the 2.8 inch esp-32 touchscreen via IDE or esp32 flash tool.

Recommend to power esp32 display 2.8" via 5V power adapter, not PC.

Comes with 1pcs esp32 display 2.8 inch, 2pcs 1.25mm 2pin cable, 2pcs 1.25mm 4pin to female dupont wire, and 2pcs 1.25mm 4pin to male dupont wire.

User manual available if do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".

DIYmalls 915MHz ESP32 LoRa V3 LoRa32 OLED Development Board + 915 MHz LoRa Antenna for Meshtastic (Pack of 2), not Compatible with LoRa 32 V2

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

You will receive, 2pcs 915 MHz esp32 lora V3, 2pcs 915mhz lora antenna,and 2pcs 2pin 1.25mm cable.

LoRa v3 board 915mhz comes unassembled, soldering required by you, not equipped with 3.7v lithium battery as well.

You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, 5V type C power is recommended.

It comes without the case for lora v3, but the 915 antenna is suitable for lora v3 case. You can find the lora case in DIYmalls store via searching B0BR3MQ9BG

If you have any question, please confirm it with DIYmalls as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".

DIYmalls 1.28 inch ESP32-C3 IPS Round Display ESP32-2424S012C-I Capacitive Touchscreen 240x240 TFT LCD Module ESP32-C3-MINI-1U Development Board for Arduino IDE

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

ESP32-2424S012C-I module is the combination of ESP32-C3-MINI-1U development board + 1.28" capacitive touchscreen ips display.

Support uploading code to the 1.28 inch esp-32 touchscreen display via IDE or esp32 flash tool.

Recommend to power 1.28" round display esp32 capacitive touch screen via 5V power adapter, not PC.

Comes with 1pcs 1.28 inch round display esp32 screen, 1pcs 1.25mm 2pin cable, 1pcs 1.0mm 4pin to female dupont wire, and 1pcs 1.0mm 4pin to male dupont wire.

User manual available if do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".

DIYmalls 2 AAA Battery Holder with Switch for Microbit Battery Pack 3V 2 Cell with ON/Off Case Cover Box PH2.0 Connector 14cm Wire (Pack of 5)

Battery Holders

Buy on Amazon Find on eBay

Designed for AAA battery and comes without any batteries, and it's compatible with Micro:bit development board.

Microbit battery pack switch function: AAA battery holder with ON/OFF switch ; Recessed designed On-Off Switch, more safe, more durable.

Wire Leads: 2 AAA battery holder with wire leads ; Interface: PH2.0. Cable length: About 14cm / 5.5inch.

You will receive 5pcs micro bit aaa battery holder pack.

If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".

DIYmalls 2.8" inch ESP32 Display ESP32-2432S028R ILI9341 Resistive Touch Screen 240x320 TFT LCD Module ESP-WROOM-32 Development Board for Arduino IDE

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

Combination of ESP-WROOM-32 ESP32 development board + 2.8 inch display ILI9341 resistive touch screen.

Upload code to the 2.8 inch touchscreen via IDE or esp32 flash tool.

Used for remote environment data collection, remote data fusion, remote parameter settings, and other IoT filed applications.

Comes with 1pcs esp32 display 2.8 inch, 1pcs USB 2.0 to micro USB data cable 1 meter, 1pcs dupont female to 1.25mm wire.

User manual available if do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".

DIYmalls Feetech FS90R 360 Degree Continuous Rotation Micro RC Servo Motor 6V for Arduino Microbit Smart Car Robot (Pack of 2)

RC Servos

Buy on Amazon Find on eBay

You will only receive 2pcs continuous rotation servo with accessories, no other products..

Feetech fs90r servo is widely used for microbit, drone, smart car, robot etc.

fs90r servo is 360 degree continuous rotation servo, so you can not control its stop position.

Operating speed is 110RPM (4.8V), 130RPM (6V), but you can change the pwm to change the servo speed , to make it slower or faster.

If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".

DIYmalls FAQs

Is DIYmalls Legit?

Yes, DIYmalls is a legitmate brand on Amazon. After conducting a comprehensive analysis of 819 customer reviews for DIYmalls products on Amazon, we have determined its average rating. Offering great value and satisfying quality, DIYmalls has achieved a respectable rating of 4.3 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from DIYmalls on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more DIYmalls products?

If you're interested in DIYmalls and want to find more DIYmalls products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type DIYmalls in the search box and hit Enter to see the search results.
Find and click the correct DIYmalls to go to the new page.
Select the products you want in the DIYmalls buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more DIYmalls products.

How does findthisbest choose the top DIYmalls products?

We analyze millions of DIYmalls products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase DIYmalls products via FindThisBest?

Go to the DIYmalls page.
Select the product you want in the DIYmalls buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product DIYmalls 2.8" ESP32-2432S028R ESP32 Display ILI934..., you can view it on Amazon page.
Place your order on Amazon.

Who are the manufacturers of the DIYmalls products?

Most of the DIYmalls products are produced by DIYmalls - Heltec Automation and Heltec Automation. The manufacturers provide DIYmalls with a steady supply of products, and they have a good cooperative relationship with each other.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the DIYmalls products, helping you make more informed buying decisions. We recommend best choices of the products from the DIYmalls brand, helping you make better shopping choices with less time and energy.

Similar Brands