Waveshare

4.3 Fact checked

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Waveshare has 306 products for sale. Waveshare products range in price from $14.39 to $169.99, and the average price of all the products is about $45.32.

You can confidently purchase Waveshare products from the seller waveshare. The brand holds an average rating of 4.3, testifying to its excellent reputation.

Waveshare Best Sellers

Last Updated: Jan 10, 2026

2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

This is 2.13inch E-Ink display HAT with Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh.

No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.

SPI interface, for connecting with controller boards likeArduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.

Version Notice: The driver board is Rev2.1 (Version 2.1), which is independent of the screen version. Currently, there is only Rev2.1 (Version 2.1) for the driver board and QC label V4 is for the screen version, QC label V4 is currently being shipped.

Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32): bit.ly/3hZh77i

Read more Read less

waveshare 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, 250x122 Resolution SPI Interface Supports Partial Refresh

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4 are screen versions, and V4 is currently being shipped. V4 version is fully compatible with V3; and it provides the demo that can realize a fast refreshing function.

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs

Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using!

Read more Read less

USB to RS485 Converter Industrial Adapter Original FT232RL and SP485EEN Fast Communication Embedded Protection Circuits Resettable Fuse ESD Protection

Serial Adapters

Buy on Amazon Find on eBay

Industrial USB to RS485 bidirectional converter with original FT232RL and SP485EEN chip. Due to its stable communication, it is an ideal choice for industrial control equipments and/or applications with high communication requirement.

Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic.

Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance.

Transmission distance up to 1.2km--- The USB signal can be converted into a balanced differential RS485 signal and the transmission rate is stable. The reliable speed is 300-921600bps, the transmission distance is about 1.2km for RS485, and about 5 meters for USB.

Multi system Support: Supports Linux, Android, WinCE, Win11/10/8.1/8/7/XP, etc.

Read more Read less

Waveshare Industrial 8-Ch Analog Acquisition Module, 12-Bit High-Precision, Supports Voltage and Current Acquisition, DC 7~36V Wide Voltage Power Supply, 8-ch Voltage Mode, 0~10V

Buy on Amazon Find on eBay

8-ch voltage mode, 0~10V

Configurable device address (1~255), multi devices can be cascaded on RS485 bus. bOnboard voltage regulator, supports 7~36V wide range power supply. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal

Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong anti-interference. Onboard resettable fuse and TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, provides over-current/over-voltage proof, lightningproof & anti-electrostatic

Supports 12-bit high-precision acquisition with multiple range input modes, supports single-ended/differential input, supports voltage and current simultaneous acquisition. Adopts high-precision resistors and zero-drift high-precision operational amplifier for more accurate data acquisition

Built-in oversampling digital filtering algorithm, onboard watchdog, for stable output without crashing. Rail-mount case design, support stacking combination, easy to install and safer to use. 3x LEDs for indicating the MCU status and signal transceiving status

Read more Read less

Waveshare 2.13inch E-Paper Display HAT Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH/Jetson Nano, 250x122 Resolution Black/White Dual-Color

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like /Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs.

Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano//STM32).

Read more Read less

Waveshare USB to RS232 / RS485 / TTL Industrial Isolated Converter with Original FT232RL Embedded Protection Circuits and Aluminium Alloy Enclosure for Industrial Control Equipments

Buy on Amazon Find on eBay

This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power isolation ADI magnetical isolation and TVS diode etc. What's more the USB TO RS232/485/TTL comes with an aluminium alloy enclosure make it solid and durable to work.

The USB TO RS232/485/TTL is very easy to use fully automatic transceiving without delay. Due to its fast communication stability reliability and safety it is an ideal choice for industrial control equipments and/or applications with high communication requirement.

Fully automatic transceiver circuit with no delay ensures the USB port communicates with different interfaces fastly and stably without interfering each other

Onboard unibody power supply isolation provides stable isolated voltage needs no extra power supply for the isolated terminal

High quality USB-B and RS232 connectors smoothly plug/pull

Read more Read less

Waveshare 8-Ch Ethernet Relay Module (B) with Digital Input, Modbus RTU/Modbus TCP Protocol, PoE Port Communication, with Various Isolation and Protection Circuits, Industrial Grade Rail-Mount Case

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

Features flash-on, flash-off function, by passing argument to the command, it is possible to turn on the relay for a while and then close it automatically. Supports DC 7~36V wide range power input and PoE power supply

Supports relay control through MQTT protocol, comes with Alibaba Cloud MQTT application demo. Onboard Optocoupler isolation, prevent the relay from being interfered by high-voltage circuit

Adopts dedicated relay driver chip, with built-in flyback diode protection, for stronger and more stable driving ability.Supports passive and active digital input, with bi-directional optocoupler isolation, built in debouncing algorithm. The relay supports digital input linkage control or toggle control

Reverse-proof circuit, prevent the circuit from being damaged accidentally by incorrect connection. High quality relay, contact rating: ≤10A 250VAC/30VDC. Rail-mounted ABS plastic enclosure, easy to install, safe to use. 4 LEDs and Network indicators for indicating the MCU status and signal transceiving status

Rich WiKi Resources We provide official Wiki resources, please contact us for more information.

Read more Read less

Waveshare ESP32-C6 1.47inch Display Development Board, 172×320, 262K Color, 160MHz Running Frequency Single-Core Processor, Supports Wi-Fi 6 & BLE, with Colorful RGB LED, ESP32 with Display

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz

Supports 2.4GHz Wi-Fi 6 (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna

Built in 320KB ROM, 512KB of HP SRAM, 16KB LP SRAM and 4MB Flash memory. Onboard 1.47inch LCD display, 172×320 resolution, 262K color

Adapting multiple IO interfaces, integrates full-speed USB port. Onboard TF card slot for external TF card storage of pictures or files

Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios. Built-in RGB LED with clear acrylic sandwich panel for cool lighting effect

Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Read more Read less

Waveshare ESP32-S3 1.8inch AMOLED Touch Display, Embedded with SH8601 Display Driver and FT3168 Capacitive Touch Chip, ESP32 with Display,32-bit LX7 Dual-core, 368×448 Pixels, Without Lithium Battery

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

Note!!!This product requires a lithium battery for use. This version does not come with the lithium battery and needs to be purchased separately.

Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory

Type-C connector, improving device compatibility, easier to use. Onboard 1.8inch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources

Onboard 1.8inch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources

Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard PWR and BOOT programmable buttons for easy custom function development

Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, optional for 3.7V Lithium battery. Reserved pads of 7 × GPIO, 1 × I2C, 1 × UART, and 1 × USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.

Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Read more Read less

Waveshare 13.3inch E-Ink Display HAT (K) for Raspberry Pi, SPI Interface, Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

No backlight, keeps displaying last content for a long time even when power down

Ultra low power consumption, basically power is only required for refreshing

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano

SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs

Comes with online development resources and manual

waveshare 4inch Square Capacitive Touch Screen LCD Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W 720×720 Resolution DPI IPS Toughened Glass Cover Low Power Solution

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

Provide online user manual, please check the manual carefully before using!

4inch Square Capacitive Touch Screen LCD (C) for Raspberry Pi, 720×720, DPI, IPS, toughened glass cover, low power solution.

4inch IPS Display, 720x720 hardware resolution. Designed for Raspberry Pi, based on Raspberry Pi 40pin GPIO interface.

Using DPI666 interface of Raspberry Pi to drive LCD, refresh rate up to 60Hz.

Drive capacitive touch through I2C interface of Raspberry Pi, 5-points touch, toughened glass panel, hardness up to 6H. Supports Raspberry Pi OS / Ubuntu / Kali systems.

Waveshare Industrial 8-Ch Digital Input & Output Module, DC 7~36V Wide Voltage Power Supply, Modbus RTU Protocol, Multiple Isolation Protection Circuits, Rail-Mount Support

IO Modules

Buy on Amazon Find on eBay

Configurable device address (1~255), multi devices can be cascaded on RS485 bus

Onboard voltage regulator, supports 7~36V wide range power supply. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal

Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong anti-interference

Onboard resettable fuse and TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, provides over-current/over-voltage proof, lightningproof & anti-electrostatic

Supports passive and active digital input, with bi-directional optocoupler isolation, built in debouncing algorithm. Supports DI/DO linkage control or DO toggle control

The output utilizes Darlington transistors with optocoupler isolation, provides stronger driving capability with up to 500mA sinking current, built in flyback diode protection

Features flash-on, flash-off function, by passing argument to the command, it is possible to turn on the output for a while and then close it automatically

Rail-mount case design, support stacking combination, easy to install and safer to use

Multiple LEDs for indicating the input & output status, MCU status and signal transceiving status

Read more Read less

8-CH Ethernet Relay Module, Modbus RTU/Modbus TCP Protocol, PoE Port Communication, with Various Isolation and Protection Circuits

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

This product is an industrial 8-ch relay module controlled via Ethernet port, adopts Modbus RTU/Modbus TCP protocols, supports PoE power supply, also comes with an ABS rail-mount case.

The Modbus POE ETH Relay is very easy to use. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirements.

Features flash-on, flash-off function, by passing argument to the command, it is possible to turn on the relay for a while and then close it automatically.

Supports DC 7~36V wide range power input and PoE power supply. Supports relay control through MQTT protocol, comes with Alibaba Cloud MQTT application demo.

Onboard Optocoupler isolation, prevent the relay from being interfered by high-voltage circuit. Reverse-proof circuit, prevent the circuit from being damaged accidentally by incorrect connection. High-quality relay, contact rating: ≤10A 250VAC/30VDC.

Comes with Online Development Resources and Tutorials to help you get started quickly: bit.ly/45dleiL

Read more Read less

Waveshare 2inch Mini LCD Screen - Compatible with Raspberry Pi/Arduino/STM32, 240x320 Resolution IPS LCD Display, 262K RGB Color, Embedded ST7789VW Driver, SPI Interface

Monitors Gaming Monitors

Buy on Amazon Find on eBay

2inch LCD Display Module, IPS Screen, 240×320 Resolution, SPI Interface,requires minimum GPIO for controlling.

Operating voltage: 3.3V/5V (Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly).

Display color: RGB, 262K color.Backlight: LED

Interface: SPI. LCD type: IPS. Driver: ST7789V. Resolution: 240(V) x 320 (H) RGB.

Display size: 30.60（H）x 40.80（V）mm. Pixel size: 0.0975（H）x 0.0975（V）mm. Dimension: 58 x 35 (mm).

Comes with Online Development Resources /User Manual: bit.ly/3TiYx7e

waveshare ESP32-S3 2.06inch AMOLED Touch Watch Development Board Based on ESP32-S3R8 Microcontroller, Supports Offline Voice Recognition and AI Speech Interaction

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

Attention: This is a wearable watch style development board that is not a standard pre configured smartwatch. It is a DIY module that requires customers to develop their own applications to fully utilize its features. This product is aimed at technology enthusiasts, developers or programming enthusiasts, manufacturers, etc.

High-performance Microcontroller:Based on the ESP32-S3R8 microcontroller,Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna

Integrate Multiple Function Modules:it integrates a 2.06inch AMOLED capacitive touch display, 6-axis IMU, RTC chip, audio codec chip, power management IC, and so on.

Diverse Application Scenarios:Onboard ES8311 Audio Codec Chip And ES7210 Echo Cancellation Circuit. Meet Daily Audio Application Scenarios,such as Audio Playback and Audio Capture.Supports Offline Voice Recognition And AI Speech Interaction.Allows Access To Online Large Model Platforms Such As DeepSeek, Doubao, Etc.

Wearable Design.Detachable Watch Straps For Easy Replacement And Convenient Matching With Different Styles

Read more Read less

waveshare 7inch HDMI LCD IPS Capacitive Touch Screen 1024×600 Display Monitor Compatible with Raspberry Pi 5/4B/3B+/3B/Pi Zero W/Zero 2W/Pico/Pico W/Pico 2/Pico 2WJetson Nano/Win10/8/7,etc.

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

(The newest Rev4.1) 7inch HDMI LCD (C), IPS screen, Capacitive Touch Screen ,HDMI interface,1024x600 hardware resolution.HDMI Interface for displaying , USB Interface for touching. Backlight can be turned off to lower power consumption

Supports popular mini PCs,Compatible with Raspberry Pi, BB Black, as well as general desktop computers: When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free;When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free

Note:Please set the config.txt file by addding [the hdmi_drive=1] into the end of code if you connect it with raspberry pi. (like manual in picture)Otherwise the LCD could not work properly.

Note:If the LCD work in abnormal states for long time, it may be broken if you don't set the config.txt file at the beginning.After setting config file,please power off the screen and put it aside for a few hours to avoid the flickers.

Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: R Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable

Read more Read less

Waveshare Modbus RTU 32-Ch Relay Module, RS485 Interface, with Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

Configurable device address (1~255), multi devices can be cascaded on RS485 bus. Features flash-on, flash-off function, it is possible to turn on the relay for a while and then close it automatically via the command

Onboard voltage regulator chip, supports 7~36V wide voltage power supply. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal

Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption. Onboard resettable fuse and TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, provides over-current/over-voltage proof, lightningproof & anti-electrostatic

Onboard Optocoupler isolation, prevent the relay from being interfered by high-voltage circuit. Onboard dedicated relay driver chip, with built-in freewheeling diode protection, the driving ability is stronger and more stable

Reverse-proof circuit, prevent the circuit from being damaged accidentally by incorrect connection. High quality relay, contact rating: ≤10A 250VAC/30VDC. Rail-mounted ABS case, easy to install, safe to use. 3 LEDs for indicating the MCU status and signal transceiving status

Read more Read less

waveshare ESP32-S3 1.8inch Knob Display Development Board, Multi-Functional Knob Screen, Capacitive Touch, 2.4GHz Wi-Fi and Bluetooth Wireless Connection, No BAT

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

1.8inch Capacitive Touchscreen: The board features a 1.8-inch capacitive touchscreen with excellent touch sensitivity, offering a responsive display for a variety of interactive applications.

ESP32-S3 Chip: Powered by the ESP32-S3, the board delivers high-performance dual-core processing capabilities with built-in hardware support for AI and machine learning tasks.

Dual Wireless Connectivity: Supports both Wi-Fi and Bluetooth 5.0, enabling seamless communication with other devices for Internet of Things (IoT) and remote control applications.

Audio and Voice Integration: Equipped with an audio decoder and microphone, this board allows integration of voice recognition and audio playback, making it suitable for smart audio applications.

Flexible Power Supply: The board can be powered via USB Type-C or a 3.7V lithium battery, providing flexibility for portable or stationary projects.

Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

Read more Read less

Industrial 8-Ch ESP32-S3 WiFi Relay Module, Onboard RS485, Digital Input, Relay, Ethernet Port and Multiple Isolation Protection Circuits, Supports RS485 and Bluetooth/WiFi Remote Control

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

Industrial 8-Channel ESP32-S3 WiFi Relay Module, based on ESP32-S3 microcontroller, built-in 32-bit LX7 dual-core processor, up to 240MHz, integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication

Industrial 8-Ch WiFi Network Relay Module, onboard digital input, RS485, and ethernet port interfaces. Built-in multiple isolation protection circuits such as power isolation and optocoupler isolation, more safe, stable and reliable

Supports RS485 and Bluetooth / WIFi Remote Control, onboard 8-ch relays and 8-ch digital inputs, contact rating of the onboard relay up to 10A 250V AC / 30V DC, directly controlling 220VAC home appliances, or devices below 30V DC

Digital Input, supports passive (dry contact) and active (wet contact) digital input, with bi-directional optocoupler isolation

Supports Arduino IDE, comprehensive SDK, online development resources, tutorials, and technical support are provided, please feel free to contact us if you need

Read more Read less

Waveshare ESP32-C6 1.8inch Touch AMOLED Display Development Board, 368 × 448 Resolution, Supports Wi-F 6, BLE 5 and Zigbee,No Batt

Single Board Computers Raspberry Pi Starter Kits

Buy on Amazon Find on eBay

Equipped with a ESP32-C6 high-performance RISC-V 32-bit processor with up to 160MHz operating frequency.Integrated Wi-F 6, B T 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wire-less communication, provides superior RF performance, with onboard antenna.

Onboard 512KB HP Static RAM, 16KB LP Static RAM, 320KB ROM and external 16MB Flash memory.Onboard 1.8inch capacitive touch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color.

Onboard 1.8inch capacitive touch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color.Built-in SH8601 display driver and FT3168 / FT6146 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources.

Onboard PWR and BOOT programmable buttons for easy custom function development.

Onboard TF card slot for expanded storage, fast data transfer, and transfer flexibility, suitable for applications such as data recording and media playback, simplifying circuit design.

Read more Read less

Waveshare FAQs

Is Waveshare Legit?

Yes, Waveshare is a legitmate brand on Amazon. After conducting a comprehensive analysis of 1,457 customer reviews for Waveshare products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Waveshare has achieved a respectable rating of 4.3 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Waveshare on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

How to find more Waveshare products?

If you're interested in Waveshare and want to find more Waveshare products, you can follow the steps below:

Go back to FindThisBest's homepage.
Type Waveshare in the search box and hit Enter to see the search results.
Find and click the correct Waveshare to go to the new page.
Select the products you want in the Waveshare buying guide, and take a glance at the prices and features of the products.
View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Waveshare products.

How does findthisbest choose the top Waveshare products?

We analyze millions of Waveshare products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

How can I purchase Waveshare products via FindThisBest?

Go to the Waveshare page.
Select the product you want in the Waveshare buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product 2.13inch E-Ink Display HAT V4 Version, Black/White..., you can view it on Amazon page.
Place your order on Amazon.

What is the purpose of your brand guide?

Our mission is to provide you with the most up-to-date and objective information about the Waveshare products, helping you make more informed buying decisions. We recommend best choices of the products from the Waveshare brand, helping you make better shopping choices with less time and energy.

Similar Brands

Libre Computer Project

Orange Pi

Radxa