Adafruit feature image

Adafruit

Review rating Review rating Review rating Review rating Review rating 4.5 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Adafruit has 266 products for sale. Adafruit products range in price from $6.98 to $37.91, and the average price of all the products is about $18.73. It's affordable for most consumers, and you can feel free to pick your favorite products.

We found that most of the Adafruit products are manufactured by KOTENIA, Adafruit Industries, and ADAFRUIT INDUSTRIES. The manufacturers provide Adafruit with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase Adafruit products from the seller 3DMakerWorld, Inc.. The brand holds an average rating of 4.5, testifying to its excellent reputation.

Adafruit Best Sellers

Last Updated: Jan 9, 2026

Adafruit Circuit Playground Express Developer Edition - Base Kit

The original Circuit Playground Classic made even better
ATSAMD21 ARM Cortex M0 Processor, running at 3.3V and 48MHz
2 MB of SPI Flash storage, used primarily with CircuitPython to store code and libraries.
MicroUSB port for programming and debugging
USB port can act like serial port, keyboard, mouse, joystick or MIDI!

Adafruit Circuit Playground Express

ATSAMD21 ARM Cortex M0 Processor (3.3V and 48MHz)
The original Circuit Playground Classic but even better - more sensors and easier to program
MicroUSB port for programming and debugging
USB port can act like serial port, keyboard, mouse, joystick or MIDI

Adafruit Trinket - 5V Mini Microcontroller - ATtiny85, 8K Flash, 512 SRAM, 512 EEPROM, USB, I2C, SPI, Infrared, Single Board Computer, Microcontroller

ATtiny85 on-board, 8K of flash, 512 byte of SRAM, 512 bytes of EEPROM Internal oscillator runs at 8MHz, but can be doubled in software for 16MHz
USB bootloader with a nice LED indicator looks just like a USBtinyISP so you can program it with AVRdude (with a simple config modification) and/or the Arduino IDE (with a few simple config modifications)
Micro-USB jack for power and/or USB uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram.
~5.25K bytes available for use (2.75K taken for the bootloader)
On-board 5.0V power regulator with 150mA output capability and ultra-low dropout. Up to 16V input, reverse-polarity protection, thermal and current-limit protection.

Adafruit BMP280 I2C or SPI Barometric Pressure and Altitude Sensor

Price For: Each Manufacturer: Adafruit Product Category: Adafruit Accessories RoHS: Product: Sensors Type: Board Mount Humidity Sensors Brand: Adafruit Packaging: Bulk

Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055

Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor
Data output over I2C
Absolute orientation, angular velocity, acceleration, magnetic field strength, linear acceleration, gravity, temperature
Easy to use Adafruit tutorials
Easy soldering of header pins required

Adafruit Stainless Thin Conductive Thread - 2 Ply - 23 Meter/76 ft

Thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables work!
This thread is 2 ply, a little thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles or with a sewing machine that can handle 'heavy' Thread.
It also has fairly low resistivity, 16 ohms per foot so you can use it to drive LEDs and other electronic components that use under 50mA.
Because it is made of stainless steel fiber, it will not oxidize like silver does: your projects will not 'stop working' Because of oxidation after a few months and its safe to wash.
Comes in a small metal (or plastic) bobbin with 23 meters wound on. Adafruit part 640

Adafruit MicroSD Card Breakout Board+ [ADA254]

Activity LED lights up when the SD card is being read or written
Push-push socket with card slightly over the edge of the PCB so its easy to insert and remove
Works great with Arduino, with tons of example code and wiring diagrams
Skill Level: Component or Part

Adafruit Accessories Hook-up Wire Spool Set 22AWG [Solid Core]

Price For: Each Manufacturer: Adafruit Product Category: Adafruit Accessories RoHS: Product: Wire & Cable Type: Hook-up Wire (Solid Core) Brand: Adafruit Packaging: Bulk

Adafruit Feather nRF52 Bluefruit LE - nRF52832

The Adafruit Feather nRF52 Bluefruit is an easy-to-use all-in-one Bluetooth Low Energy board, with a native-bluetooth chip, the nRF52832! It's our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging.
This chip has twice the flash, SRAM and performance of the earlier nRF51-based Bluefruit modules. Best of all it has Arduino IDE support so there is no 'helper' chip like the ATmega32u4 or ATSAMD21. Instead, this chip is programmed directly! It's got tons of awesome peripherals: plenty of GPIO, analog inputs, PWM, timers, etc. Leaving out the extra microcontroller means the price, complexity and power-usage are all lower/better.
It allows you to run code directly on the nRF52832, straight from the Arduino IDE as you would with any other MCU or Arduino compatible device. A single MCU means better performance, lower overall power consumption, and lower production costs if you ever want to design your own hardware based on your Bluefruit nRF52 Feather project!
The chip comes pre-programmed with an auto-resetting bootloader so you can upload quickly in the Arduino IDE with no button-pressing. Want to program the chip directly? You can use our command line tools with your favorite editor and toolchain.
The example code works great with Adafruit's existing iOS and Android app.

Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0 [ADA2772]

Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
Light as a (large?) feather - 4.6 grams. 32.768 KHz crystal for clock generation & RTC
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM No EEPROM. You also get tons of pins - 20 GPIO pins Hardware Serial, hardware I2C, hardware SPI support PWM outputs on all pins 6 x 12-bit analog inputs 1 x 10-bit analog ouput (DAC)
3.3V regulator with 500mA peak current output. Built in 100mA lipoly charger with charging status indicator LED
USB native support, comes with USB bootloader and serial port debugging

Adafruit 2028 Assembled Pi T-Cobbler Plus - GPIO Breakout for

73mm x 20mm x 11mm / 2.9" x 0.8" x 0.4"
Height with pins: 19mm / 0.8"
Width at top of T: 58mm / 2.3"
Country of origin: China

Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4

Adafruit Lipo 4410 Micro Charger for LiPoly Batt with USB Type C Plug

Comes assembled and ready to be taken out of the box
1/8" Bypass Inserts with 5V, D- and D+, GND and VBAT Data Lines
5V input via USB Type-C connector
For charging 3.7/4.2V lithium polymer batteries (not compatible with old 3.6/4.1V cells)
100mA charging current, adjustable to 500mA by soldering a closed jumper

Adafruit (PID 3591) HUZZAH32 – ESP32 Feather Board (pre-soldered)

Module is nestled in at the end of this Feather contains a dual-core ESP32 chip
ESP32 has way more GPIO than the ESP8266
Recommended for makers who have some experience with microcontroller programming.
Pre-assembled headers

White LED Backlight Module - Medium 23mm x 75mm

Special type of acrylic strip that is very good at diffusing light
Treat this backlight just like an LED
These make great wearables without the need for EL or inverters
Brighter than EL and use less battery

Adafruit TV-B-Gone Kit - Universal v1.2

This kit allows you to turn of any TV with the click of a button.
Open source kit version of the popular TV-B-Gone is fun to make and even more fun to use.
Tools and batteries not included.
Assembly is required. (Medium Soldering Skill Needed)
Warning: This product contains small components and requires assembly.

Adafruit NeoPixel Ring - 16 x 5050 RGB LED with Integrated Drivers [ADA1463]

6 ultra bright smart LED NeoPixels are arranged in a circle
The rings are 'chainable' and each LED is addressable
Slim Design
Assembled and Tested

Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H (3421)

Smaller and thinner than 'classic' electret microphones
Low cost MEMS mic with a range of about 50Hz - 15KHz
Good for just about all general audio recording/detection
Purely digital, No analog conversion required!

ADAFRUIT INDUSTRIES 1578 Lithium Ion Polymer Battery - 3.7v 500mAh

Thin, light and powerful
Output ranges from 4.2V when completely charged to 3.7V
Capacity of 500mAh for a total of about 1.9 Wh
Genuine JST connector

Adafruit Industries FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB C and Stemma QT

As of Feb 12, 2020 we have given this venerable board a makeover! We now have a modern USB C connector on the board (instead of micro USB), a I2C switch to connect D1 and D2 for easy I2C interfacing
3V power output pin up to 500mA
Skill Level: Component or Part

Adafruit FAQs

Yes, Adafruit is a legitmate brand on Amazon. After conducting a comprehensive analysis of 1,147 customer reviews for Adafruit products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Adafruit has achieved a respectable rating of 4.5 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Adafruit on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Adafruit and want to find more Adafruit products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Adafruit in the search box and hit Enter to see the search results.
  3. Find and click the correct Adafruit to go to the new page.
  4. Select the products you want in the Adafruit buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Adafruit products.

We analyze millions of Adafruit products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 266 Adafruit products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Adafruit page.
  2. Select the product you want in the Adafruit buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Adafruit Circuit Playground Express Developer Edit..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the Adafruit products are produced by KOTENIA, Adafruit Industries, and ADAFRUIT INDUSTRIES. The manufacturers provide Adafruit with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the Adafruit products, helping you make more informed buying decisions. We recommend best choices of the products from the Adafruit brand, helping you make better shopping choices with less time and energy.