Skip to content
Jex Electronics feature image

Jex Electronics

4.2 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Jex Electronics has 164 products for sale. Jex Electronics products range in price from $1.19 to $9.99, and the average price of all the products is about $3.05. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase Jex Electronics products from the seller Jex-Electronics. The brand holds an average rating of 4.2, testifying to its excellent reputation.

Share

Jex Electronics Best Sellers

Last Updated: Jan 12, 2025

Jex Electronics Waterproof Three/3X AA Battery Holder Case Box 3.6V/4.5V with Timer Power Switch & Bare Wire Ends

  • 3 AA Waterproof Battery Holder Case with timer
  • Built in Timer Circuit to allow unit to turn on by its self for 8 hours per day. Press the button once to activate 8 hour timer (will turn on for 8 hours same time every day), press button again for constant on and once again for off.
  • Waterproof for outdoor or indoor use. Door securely latches onto a rubber gasket. The Button actuator is also sealed so the unit can be operated without opening the door

Jex Electronics Waterproof Four/4X AA Battery Holder Case Box 4.8V/6V with Timer Power Switch & Bare Wire Ends

  • 4 AA Waterproof Battery Holder Case with timer
  • Built in Timer Circuit to allow unit to turn on by its self for 8 hours per day. Press the button once to activate 8 hour timer (will turn on for 8 hours same time every day), press button again for constant on and once again for off.
  • Waterproof for outdoor or indoor use. Door securely latches onto a rubber gasket. The Button actuator is also sealed so the unit can be operated without opening the door

Jex Electronics Waterproof Two/2X AA Battery Holder Case Box 2.4V/3V with Timer Power Switch & Bare Wire Ends

  • 2 AA Waterproof Battery Holder Case with timer
  • Built in Timer Circuit to allow unit to turn on by its self for 8 hours per day. Press the button once to activate 8 hour timer (will turn on for 8 hours same time every day), press button again for constant on and once again for off.
  • Waterproof for outdoor or indoor use. Door securely latches onto a rubber gasket. The Button actuator is also sealed so the unit can be operated without opening the door

Jex Electronics Two/Twin/2X C DIY Battery Holder Case Box Base 3V Volt PCB Mount with Bare Wire Ends

  • Two C battery Slot Holder Case with wire leads for soldering / connecting
  • Total Voltage with 2X 1.5V C battery: 3V
  • Lead Cable Length: 6 Inch

Jex Electronics Two/Twin/2X AAA DIY Battery Holder Case Box Base 3V Volt PCB Mount with Bare Wire Ends

  • Two AAA battery Slot Holder Case with wire leads for soldering / connecting
  • Total Voltage with 2X 1.5V AAA battery: 3V
  • Lead Cable Length: 6 Inch

Jex Electronics Two/2X AA Panel Mount DIY Battery Holder Case Box 3V with Power Switch & Wire

  • Panel Mount 2 AA battery Holder Case with wire leads and power switch. Clip on hindged cover clips in place to secure batteries
  • Power switch built in allows you to turn power on and off while leaving batteries inside.
  • Total Voltage with 2X 1.5V AA battery: 3V

Jex Electronics Three/3X AA Panel Mount DIY Battery Holder Case Box 4.5V with Power Switch & Wire

  • Panel Mount 3 AA battery Holder Case with wire leads and power switch
  • Clip on cover clips in place to secure batteries.
  • Power switch built in allows you to turn power on and off while leaving batteries inside

Jex Electronics Eight/8X AA DIY Battery Holder Case Box 12V/9.6V with Power Switch & Wire 2.1mm DC Plug

  • Eight AA battery Holder Case with wire leads for soldering / connecting
  • Slide on cover clips in place to secure batteries
  • Power switch built in allows you to turn power on and off while leaving batteries inside.

Jex Electronics Three/3X AAA DIY Panel Mount Battery Holder Case Box 3.6V/4.5V with Power Switch

  • Panel Mount 3 AAA battery Holder Case with wire leads and power switch.
  • Clip on cover clips in place to secure batteries
  • Power switch built in allows you to turn power on and off while leaving batteries inside.

Jex Electronics Maxi APX Large Blade Fuse (10 Amp, 1)

  • Replacement MAXI fuse commonly used in Car and RV Audio/Power Systems
  • MAXI APX Large Blade Style Fuse
  • Gold or Nickel Plated Contacts

Jex Electronics Ten/10X AA DIY Battery Holder Case Box Base 15V/12V Volt Bare Wire Ends

  • Ten AA battery Slot Holder Case with wire leads for soldering / connecting.
  • Total Voltage with 10X 1.5V AA battery: 15V or 6V with 10X 12V AA Battery.
  • Lead Cable Length: 6 Inch.

Jex Electronics Three/3X C DIY Battery Holder Case Box Base 4.5V Volt PCB Mount with Bare Wire Ends

  • Three C battery Slot Holder Case with wire leads for soldering / connecting
  • Total Voltage: 4.5V with 3X 1.5V C battery or 3.6V with 3X 1.2V C battery
  • Dimension: Approx. 84mm x 62mm x 22mm.(L*W*H)

Jex Electronics Professional Headphone Speaker Patch Cable 1/8" 3.5mm Stereo Jack Male to Male Gold Plated (1ft Patch)

  • Professional Quality
  • High quality thick yet flexible 4mm cable
  • High Quality metal sleeves

Jex Electronics Four/4X AA Panel Mount DIY Battery Holder Case Box 6V with Power Switch & Wire

  • Panel Mount 4 AA battery Holder Case with wire leads and power switch. Clip on cover clips in place to secure batteries
  • Power switch built in allows you to turn power on and off while leaving batteries inside.
  • Total Voltage with 4X 1.5V AA battery: 6V

Jex Electronics Three/3X AAA DIY Battery Holder Case Box 3.6V/4.5V with Power Switch & Bare Wire Ends

  • Great for repair or DIY electric Projects
  • Three AAA battery Holder Case with wire leads
  • Slide on cover clips in place to secure batteries. Power switch built in allows you to turn power on and off while leaving batteries inside

Jex Electronics Four/Quad/4X AA DIY Battery Holder Case Box Base 6V Volt PCB Mount with Bare Wire Ends

  • Quad AA battery Holder Case with wire leads for soldering / connecting
  • Total Voltage with 4X 1.5V AA battery: 6V
  • Lead Cable Length: 6 Inch

Jex Electronics Twin/2X AAA DIY Battery Holder Case Box 3V with Power Switch & Bare Wire Ends

  • Twin AAA battery Holder Case with wire leads for soldering / connecting
  • Slide on cover clips in place to secure batteries
  • Power switch built in allows you to turn power on and off while leaving batteries inside.

Jex Electronics Four/Quad/4X C DIY Battery Holder Case Box Base 6V Volt PCB Mount with Bare Wire Ends

  • Four C battery Slot Holder Case with wire leads for soldering / connecting
  • Total Voltage with 4X 1.5V C battery: 6V
  • Lead Cable Length: 6 Inch

Jex Electronics One/Single/1X AA DIY Battery Holder Case Box Base 1.5V PCB Mount with Bare Wire Ends

  • Single AA battery Slot Holder Case with wire leads for soldering / connecting
  • Total Voltage with 1X 1.5V AA battery: 1.5V
  • Curved over edges to hold battery securely in place

Jex Electronics FAQs