Onyehn feature image

Onyehn

Review rating Review rating Review rating Review rating Review rating 4.2 Fact checked
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Onyehn has 140 products for sale. Onyehn products range in price from $9.19 to $21.59, and the average price of all the products is about $13.45. It's affordable for most consumers, and you can feel free to pick your favorite products.

You can confidently purchase Onyehn products from the seller Onyehn. The brand holds an average rating of 4.2, testifying to its excellent reputation.

Onyehn Best Sellers

Last Updated: Jan 12, 2025

Onyehn 1 Sets Console Cable RP2040 CPU Cable Chip for Nintendo Switch,Upgradable Chip Replacement Parts for Switch NS Console (Support HAC-001 and HAC-001-(01)) with Repair Tools

Onyehn 1 Sets Console Cable RP2040 CPU Cable Chip for Nintendo Switch,Upgradable Chip Replacement Parts for Switch NS Console (Support HAC-001 and HAC-001-(01)) with Repair Tools Cover
Buy on Amazon Find on eBay
NOTE:The chip NOT included the firmware, you need to flash by yourself.The pre-installed firmware chip doesn't need to be connected to USB, if you need, please connect the USB interface (UP) correctly, otherwise there has risk of chip burning.
Compatible Model: (Not for Nintendo Switch Lite or Switch OLED)This cable is only compatible with Switch(HAC-001) and Switch Endurance version(HAC-001-(01)). Note:Please make sure your model before purchase.
Replacement Part: New game console cable can be used to replace the old or damaged parts and restore the performance of the device.
Professional Installation: For Switch Oled cpu cable requires professional solderers, please prepare the tools in advance and ask for professional assistance for installation,otherwise the chip will easy to damaged.
With Repair Tools: It comes with 1 x Metal Bit Driver, 3 x Precision Bits(1 x Cross #00,1 x Tri-point Y00,1 x Tri-point Y0), 1 x Metal ESD Tweezers, 1 x Metal Pry Bar, 1 x Plastic Pry Bar, 1 x Triangle Opening Tool, 1 x Brush. Professional repair tools helps to disassemble and replace the NS Switch chip replacement more convenient.
Tips:If an error occurs after installing the chip, please check the software and reinstall it before running. Alternatively, check the format of the SD card and install the corresponding driver for the SD card format on the original system.

Onyehn 2pcs 12V-36V DC Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module

Motor Speed Controllers
Onyehn 2pcs 12V-36V DC Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module Cover
Buy on Amazon Find on eBay
Board Size: 57 X 42 X 19mm/2.24 X 1.65 X 0.75inch(L*W*H), Input Voltage Range: DC12-36V, Control Accuracy: 0.1V, Power Consumption:
Note:Due to the limitation of the size of the PCB board, the relay size of this module is mini and the circuit lines are very thin. The current should not be too large during actual use. If the current exceeds 8A, the relay contacts may be blown and cannot be used normally.The maximum current is 10A when the voltage is below 12V, and less than 8A when the voltage exceeds 12V
Programmable battery low voltage disconnect switch for DC12-36V lead acid battery and lithium ion battery. It's a protection switch module, not included batteries itself.Compatible Battery: lead acid, lithium ion battery, solar panel battery.Not suitable for battery packs.
On-board momentary push button to set the low voltage disconnect parameter and 3 digit red LED display the parameter easy to operation.When the battery voltage reach the setting values, the module will disconnect load automatically to aviod the battery from over discharging to prolong the battery lifetime. (Note:The relay does not contain a power cut-off switch,remember to cut off the power supply after disconnection, otherwise the module will continue to use the battery until the voltage is 0.)
Reset:When the power is off, press and hold the two buttons at the same time, and then power on. At this time, the screen displays "888", indicating that the factory settings are restored.The factory-set protection value: 12V, difference value: 2V.Difference Value"is the value between the battery voltage to disconnect and the battery voltage to reconnect.
Display is accurate, the switch module is quickly to open and close when near minimum voltage; Settings is stored non-volatile, it can keep set when power off

Onyehn Original Repair Part(with Screws) Replacement Right and Left Slide Rail with Flex Cable Fix Part for Nintendo Switch Console NS Rebuild Track

Nintendo Switch Controllers
Onyehn Original Repair Part(with Screws) Replacement Right and Left Slide Rail with Flex Cable Fix Part for Nintendo Switch Console NS Rebuild Track Cover
Buy on Amazon Find on eBay
Compatible with Nintendo Switch console only, NOT for Nintendo Switch OLED and Switch Lite.The left and right slide rail only for Nintendo Switch Console, not for Joy-Con Controller.Please make sure your model and type before purchasing.
Brand NEW and Original from for Switch OEM Factory.
Exactly the same as the original ones, Replace your original Broken/Worn Slider Rails.
This item is supplied to professionals, Therefore, NO Manuals, NO Guides/Tutorials.
Each Pack come with: 1 x Right Side Rail, 1 x Left Side Rail, 7 x Screws on Console Shell, 10 x Screws on Sliders, 1 x Metal Bit Driver, 3 x Precision Bits(1 x Cross #00,1 x Tri-point Y00,1 x Tri-point Y0), 1 x Metal ESD Tweezers, 1 x Metal pry bar, 1 x plastic pry bar, 1 x Triangle Opening Tool,1 x Brush.

Onyehn Console Cable RP2040 CPU Cable Chip for Nintendo Switch OLED,Upgradable Chip Replacement Parts for Switch OLED Console with Repair Tools

Nintendo Switch Controllers
Onyehn Console Cable RP2040 CPU Cable Chip for Nintendo Switch OLED,Upgradable Chip Replacement Parts for Switch OLED Console with Repair Tools Cover
Buy on Amazon Find on eBay
NOTE:The chip NOT included the firmware, you need to flash by yourself.The pre-installed firmware chip doesn't need to be connected to USB, if you need, please connect the USB interface (UP) correctly, otherwise there has risk of chip burning.
Compatible Model: (Not for Nintendo Switch or Switch Lite)This cable is only compatible with for Nintendo Switch OLED HEG-001. Note:Please make sure your model before purchase.
Replacement Part: New game console cable can be used to replace the old or damaged parts and restore the performance of the device.
Professional Installation: For Switch Oled cpu cable requires professional solderers, please prepare the tools in advance and ask for professional assistance for installation,otherwise the chip will easy to damaged.
With Repair Tools: It comes with 1 x Metal Bit Driver, 3 x Precision Bits(1 x Cross #00,1 x Tri-point Y00,1 x Tri-point Y0), 1 x Metal ESD Tweezers, 1 x Metal Pry Bar, 1 x Plastic Pry Bar, 1 x Triangle Opening Tool, 1 x Brush. Professional repair tools helps to disassemble and replace the NS Switch chip replacement more convenient.
Tips:If an error occurs after installing the chip, please check the software and reinstall it before running. Alternatively, check the format of the SD card and install the corresponding driver for the SD card format on the original system.

Onyehn 20pcs Replacement Trimmer Potentiometer Sensor for Xbox One,PS3,PS4 Switch Pro Controllers,Gasket Repair Parts for Thumb Stick Analog Joystick

PS4 Thumb Grips
Onyehn 20pcs Replacement Trimmer Potentiometer Sensor for Xbox One,PS3,PS4 Switch Pro Controllers,Gasket Repair Parts for Thumb Stick Analog Joystick Cover
Buy on Amazon Find on eBay
NOTE:Please test whether the new potentiometer patch has a resistance value before replacing it. If there is no resistance, the white part needs to be removed and installed upside down, and then the resistance needs to be tested. Refer to Figure 2 on the left and install the white parts in two directions. Then test the resistance. If there is no resistance after testing in both directions, it indicates that the potentiometer is damaged. Please contact us.
It is normal for the received patch to fall out and can be installed by yourself.
Required Ability:Needs moderate soldering. Instruction is not included, but it is not complicated.
How to use:Take out the board separately, pry open the potentiometer on the side of the joystick, and replace it with a new one. Fixes Stick drift, blind spots, creeping, stuttering, dead zones, non centered joysticks.
Package included:20*modules for games controller joystick

Onyehn Game Cartridge Card Slot Reader Tray with Headphone Jack Port Replacement fit for Nintendo Switch Repair Part(Third Party)

Nintendo Switch Controllers
Onyehn Game Cartridge Card Slot Reader Tray with Headphone Jack Port Replacement fit for Nintendo Switch Repair Part(Third Party) Cover
Buy on Amazon Find on eBay
Replacement part only compatible for Nintendo Switch Model number: HAC-001 and HAC-001(-01);Not for Switch Lite(HDH-001)or OLED model (HEG-001)
Full PCB board with card slot reader, IC chip, Flex, Headphone port
Tips: This is replacement to replace your old and damage Game Cartridge Card Slot Reader Tray Connector Flex Cable Module
No include instructions, please install it by trained professionals and people who are confident with electronic device repairs.
Each Pack come with 1x Game Card Reader slot w/ 3.5mm Headphone Jack,7x Screws on Console Shell,10x Screws on Sliders,1 x Metal Bit Driver, 3 x Precision Bits(1 x Cross #00,1 x Tri-point Y00,1 x Tri-point Y0), 1 x Metal ESD Tweezers, 1 x Metal Pry Bar, 1 x Plastic Pry Bar, 1 x Triangle Opening Tool,1 x Brush.(Note:If the product doesn't work or has any problems, please contact us by email. We will guarantee after-sales service.)

Onyehn Console Cable RP2040 CPU Cable Chip for Nintendo Switch Lite,Upgradable Chip Replacement Parts for Switch NS Lite Console with Repair Tools

Nintendo Switch Controllers
Onyehn Console Cable RP2040 CPU Cable Chip for Nintendo Switch Lite,Upgradable Chip Replacement Parts for Switch NS Lite Console with Repair Tools Cover
Buy on Amazon Find on eBay
NOTE: The chip NOT included the firmware, you need to flash by yourself.The pre-installed firmware chip doesn't need to be connected to USB, if you need, please connect the USB interface (UP) correctly, otherwise there has risk of chip burning.
Compatible Model: (Not for Nintendo Switch or Switch OLED)This cable is only compatible with for Nintendo Switch Lite HDH-001. Note:Please make sure your model before purchase.
Replacement Part: New game console cable can be used to replace the old or damaged parts and restore the performance of the device.
Professional Installation: For Switch Lite cpu cable requires professional solderers, please prepare the tools in advance and ask for professional assistance for installation,otherwise the chip will easy to damaged.
With Repair Tools: It comes with 1 x Metal Bit Driver, 3 x Precision Bits(1 x Cross #00,1 x Tri-point Y00,1 x Tri-point Y0), 1 x Metal ESD Tweezers, 1 x Metal Pry Bar, 1 x Plastic Pry Bar, 1 x Triangle Opening Tool, 1 x Brush. Professional repair tools helps to disassemble and replace the NS Switch chip replacement more convenient.
Tips:If an error occurs after installing the chip, please check the software and reinstall it before running. Alternatively, check the format of the SD card and install the corresponding driver for the SD card format on the original system.

Onyehn 15pcs/Set 2k3 Ohm Potentiometer Replacement for Dualsense PS5 Controller,Repair Part Trim Pot Resistor Module Sensor for ALPS Analog Joystick

PS5 Controllers
Onyehn 15pcs/Set 2k3 Ohm Potentiometer Replacement for Dualsense PS5 Controller,Repair Part Trim Pot Resistor Module Sensor for ALPS Analog Joystick Cover
Buy on Amazon Find on eBay
Required Ability:Needs moderate soldering. Instruction is not included, but it is not complicated.
What this fixes: Stick drift, blind spots, creeping, stuttering, dead zones, non centered joysticks.
How to use:Take out the board separately, pry open the potentiometer on the side of the joystick, and replace it with a new one.
Package include:15*2k3 Ohm 3 Pins Trimmer Potentiometer Sensor for PS5
Instructions are not included.Please Replace This Part Under Professional Guide, If Not, NO TRY

Onyehn Low Voltage DC Motor Speed Controller 1.8v 3v 5v 6v 7.2v 12v 2A 30W PWM 1803BK Adjustable Driver Switch with Speed Control Knob(10 Pack)

Electrical Motor Controls
Onyehn Low Voltage DC Motor Speed Controller 1.8v 3v 5v 6v 7.2v 12v 2A 30W PWM 1803BK Adjustable Driver Switch with Speed Control Knob(10 Pack) Cover
Buy on Amazon Find on eBay
Important Notes： An Appropriately Rated Fuse (Rated A Little Higher Than The Maximum Current You Expect To Draw) Is Recommended To Ensure Safe Operation. The Controller Is Safe With A Self-Recovery Fuse 2a. It Will Be Damaged If Connect The Supply Voltage With Wrong Polarity. Double Check All Connections Before Applying Power And Always Turn Off The Power Supply Before Making Any Wiring Changes
Note: Dc Motor Speed Regulator Dc Power Supply, Do Not Be Directly Connected To Household 220v Ac.This Brand New 1803bk Dc Motor Speed Controller Allows Controlling The Direction Of A Dc The Motor Using A Pulse-Width-Modulated (Pwm) Dc Voltage With A Duty Cycle Fully The Product Adjust From 0%-100%.
With A Self-Recovery Fuse 2a And A Power-On Led Light.If The Current Is Too Large, It Will Be Automatically Disconnected, And The Fuse Will Automatically Recover After Cooling. Pwm Dc Motor Speed Controller With Switch Function.
Connect A Voltage Of 1.8v-15v Dc To The Circuit Making Sure Of The Correct Polarity Of The Connection. Note That The Voltage Applied To The Motor Will Be Supply Voltage Applied To The Circuit. It Is Recommended To Add An Appropriately Rated Fuse In Line With The Positive Supply In Order To Protect The Circuit From Any Possible Short Circuits.
This Is A Speed Governor With A Maximum Current Of 2a. If The Continuous Current Is Greater Than 0.5a, The 775 Motor And The Stroller Motor Will Not Move. Don'T Buy It Wrong. It Is Not Recommended To Supply Power Greater Than 12v, Such As 12v Lead-Acid Batteries, Which May Cause Damage To The Governor.

Onyehn 10V-60V PWM DC Motor Governor,Stepless Variable Rotary Switches 12V 24V 36V 48V Pulse With Modulator Waterproof Shell

Motor Speed Controllers
Onyehn 10V-60V PWM DC Motor Governor,Stepless Variable Rotary Switches 12V 24V 36V 48V Pulse With Modulator Waterproof Shell Cover
Buy on Amazon Find on eBay
Motor Type:DC brush motor
Duty Cycle Adjustable: 5%-100%
Output Power: 12V*10A=120W,24*10A=240W,36V*10A=360W,48V*10A=480W
PWM Frequency: 25kHz
Practical shell,waterproof ,simple and easy-to-use,stable performance.

Onyehn Low Voltage Cutoff Module, 12V-36V DC Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module(4 Pack)

Home Automation Modules
Onyehn Low Voltage Cutoff Module, 12V-36V DC Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module(4 Pack) Cover
Buy on Amazon Find on eBay
Board Size: 57 X 42 X 19mm/2.24 X 1.65 X 0.75inch(L*W*H), Input Voltage Range: DC12-36V, Control Accuracy: 0.1V, Power Consumption:
Note:Due to the limitation of the size of the PCB board, the relay size of this module is mini and the circuit lines are very thin. The current should not be too large during actual use. If the current exceeds 8A, the relay contacts may be blown and cannot be used normally.The maximum current is 10A when the voltage is below 12V, and less than 8A when the voltage exceeds 12V
Programmable battery low voltage disconnect switch for DC12-36V lead acid battery and lithium ion battery. It's a protection switch module, not included batteries itself.Compatible Battery: lead acid, lithium ion battery, solar panel battery.Not suitable for battery packs.
On-board momentary push button to set the low voltage disconnect parameter and 3 digit red LED display the parameter easy to operation.When the battery voltage reach the setting values, the module will disconnect load automatically to aviod the battery from over discharging to prolong the battery lifetime. (Note:The relay does not contain a power cut-off switch,remember to cut off the power supply after disconnection, otherwise the module will continue to use the battery until the voltage is 0.)
Reset:When the power is off, press and hold the two buttons at the same time, and then power on. At this time, the screen displays "888", indicating that the factory settings are restored.The factory-set protection value: 12V, difference value: 2V.Difference Value"is the value between the battery voltage to disconnect and the battery voltage to reconnect.
Display is accurate, the switch module is quickly to open and close when near minimum voltage; Settings is stored non-volatile, it can keep set when power off
Package Included:4x Protection Module.

Onyehn Original Right and Left Slide Rail Replacement,Replace Broken/Worn Slider Rails for Nintendo Switch OLED HEG-001 Console

Nintendo Switch Controllers
Onyehn Original Right and Left Slide Rail Replacement,Replace Broken/Worn Slider Rails for Nintendo Switch OLED HEG-001 Console Cover
Buy on Amazon Find on eBay
These Slider Rail with Flex cable perfect fit your Switch Console. Please note that the compatible model just for Switch OLED Console.(model #: HEG-001)
Brand NEW and Original from for Switch OEM Factory.
Exactly the same as the original ones, Replace your original Broken/Worn Slider Rails.
This item is supplied to professionals, Therefore, NO Manuals, NO Guides/Tutorials.
Each Pack come with: 1x Right Side Rail;1x Left Side Rail;2 x "Y"Screws on Console Shell;6 x "+"Screws on Sliders;1 x Metal Bit Driver;2 x Precision Bits(1 x 1.5"+",1 x 1.5"Y");1 x Metal ESD Tweezers;1 x Metal pry bar;1 x plastic pry bar;1 x Triangle Opening Tool.

Onyehn Trimmer Potentiometer Sensor,Thumb Stick Analog Joystick Gasket Repair Parts for Xbox One,PS3,PS4 Switch Pro Controllers(25 Pack)

PS4 Thumb Grips
Onyehn Trimmer Potentiometer Sensor,Thumb Stick Analog Joystick Gasket Repair Parts for Xbox One,PS3,PS4 Switch Pro Controllers(25 Pack) Cover
Buy on Amazon Find on eBay
NOTE:Please test whether the new potentiometer patch has a resistance value before replacing it. If there is no resistance, the white part needs to be removed and installed upside down, and then the resistance needs to be tested. Refer to Figure 2 on the left and install the white parts in two directions. Then test the resistance. If there is no resistance after testing in both directions, it indicates that the potentiometer is damaged. Please contact us.
It is normal for the received patch to fall out and can be installed by yourself.
Required Ability:Needs moderate soldering. Instruction is not included, but it is not complicated.
How to use:Take out the board separately, pry open the potentiometer on the side of the joystick, and replace it with a new one. Fixes Stick drift, blind spots, creeping, stuttering, dead zones, non centered joysticks.
Package included:25*modules for games controller joystick

Onyehn BME280 Digital 5V Temperature Humidity Sensor,Atmospheric Barometric Pressure Board with IIC I2C Breakout for Arduino(4 Pack)

Temperature Probes & Sensors
Onyehn BME280 Digital 5V Temperature Humidity Sensor,Atmospheric Barometric Pressure Board with IIC I2C Breakout for Arduino(4 Pack) Cover
Buy on Amazon Find on eBay
Make sure to put SDO to high to get address 0x77. This will work with BME280 library perfectly.
Not only the pressure and the temperature, this sensor can measure humidity.
BME280 is a precision sensor, is soldered onto PCB.It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.
With an I2C connection you have access to enough weather data to make some pretty good predictions for your local area.
It is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings.

Onyehn Original Back Cover Replacement Top Bottom Housing Shell for Nintendo Switch

Nintendo Switch Controllers
Onyehn Original Back Cover Replacement Top Bottom Housing Shell for Nintendo Switch Cover
Buy on Amazon Find on eBay
Installion instruction is not included and Professional install is recommended.
Does not include Kickstand, screws, or any other parts.
Exactly the same as the original one, replace your damage, broken, Scratched or old Backplate.
Works with Nintendo Switch 2017 2018 2019 US Edition or Japan Edition(Just the text on the back is different)
Easy to install: Disassemble and take out the electronic circuit from the original Switch, then build the electronic part in the replacement case.

Onyehn 2-Pack 3D Analog Joystick Thumb Sticks Sensor Replacement for Microsoft Xbox 360 Wireless Controller with T8 Torx Screwdriver Repair Kits Parts

Onyehn 2-Pack 3D Analog Joystick Thumb Sticks Sensor Replacement for Microsoft Xbox 360 Wireless Controller with T8 Torx Screwdriver Repair Kits Parts Cover
Buy on Amazon Find on eBay
Needs moderate soldering. Professional installation is highly recommended, instruction or tool is not included
Support model : For Xbox 360 Wireless Controller
Application Replacement part for your original damaged and old one.
Color :Black
Package includes: (No retail package) 2 X 3D Analog Joystick+2 X LT RT Trigger Switch Button+2 X LB RB Button+2 x Conductive Rubber+2 x LT/RT Spring+2 X Thumbsticks Cap(Attached 2 silicone caps)+1 X Torx T8 Screwdrive

Onyehn 5in1 ZL ZR L SL SR Button Key Ribbon Flex Cable Replacement Part for Nintendo Switch NS Joy Con Controller

Nintendo Switch Controllers
Onyehn 5in1 ZL ZR L SL SR Button Key Ribbon Flex Cable Replacement Part for Nintendo Switch NS Joy Con Controller Cover
Buy on Amazon Find on eBay
Professional installation are highly recomended.
Replace your broken L Button Key Flex cable;Fix the Left Joy-Con SL Button Flex Cable
Fix the SR Button Flex Cable
Fix the Joy-Con ZL Button Flex Cable
Fix the Joy-Con ZR Button Flex Cable.

Onyehn 4pcs Analog 3D Joystick Thumbstick Replacement Parts with Screwdriver Repair Kits fit for Sony PlayStation 4 PS4 Controllers

PS4 Controllers
Onyehn 4pcs Analog 3D Joystick Thumbstick Replacement Parts with Screwdriver Repair Kits fit for Sony PlayStation 4 PS4 Controllers Cover
Buy on Amazon Find on eBay
NEEDS MODERATE SOLDERING.PROFESSINAL INSTALLATION IS HIGHLY RECOMMENDED,INSTRUCTION OR TOOL IS NOT INCLUDED.
Tips for disassembly and assembly of screws that are not easily damaged: To unscrew the screws, please place the screwdriver perpendicular to the screw, and then force the screws to rotate. The installation screws need to be tightened softly to the end, and finally tightened vigorously to fix them.
NOTE:Please test whether the new potentiometer patch has a resistance value before replacing it. If there is no resistance, the white part needs to be removed and installed upside down, and then the resistance needs to be tested. Refer to Figure 3 on the left and install the white parts in two directions. Then test the resistance. If there is no resistance after testing in both directions, it indicates that the potentiometer is damaged. Please contact us.
A good replacement for your damaged or non-working 3D Joystick Axis Analog Sensor Module Platform: Sony PlayStation 4 .
Package includes: (No retail package)4 x 3D Analog Joysticks+4 x Mushroom Caps+4 x fluorescent button caps+4 x silicone rubber ring+4 x 10K ohm Trimmer Potentiometer Sensor(for PS3, PS4, Xbox One series,Nintendo Switch Pro controllers ONLY!)+7 x Cross Screws+1 x Metal Bit Driver+2 x Precision Bits(1 x Cross #00,1 x Cross #0)+1 x Metal ESD Tweezers+1 x Metal Pry Bar+1 x Plastic Pry Bar+1 x Triangle Opening Tool,1 x Brush.

Onyehn Original Back Cover Replacement,Top Bottom Housing Shell(with Game Card Cover) for Nintendo Switch OLED

Nintendo Switch Cases & Storage
Onyehn Original Back Cover Replacement,Top Bottom Housing Shell(with Game Card Cover) for Nintendo Switch OLED Cover
Buy on Amazon Find on eBay
Installion instruction is not included and Professional install is recommended.
Exactly the same as the original one, replace your damage, broken, Scratched or old Backplate.
Only works with Nintendo Switch OLED Console(NOT FIT for Switch 2017/2018/2019, Switch LITE.)
Easy to install: Disassemble and take out the electronic circuit from the original Switch, then build the electronic part in the replacement case.
Each Pack come with: 1x Housing Bare Shell, 1x Bracket Plate Cover, 1x Game card Cover. (CAUTION: This shell does NOT come with screws or replacement stand, rear housing shell ONLY.)

Onyehn 4 Set Silicone Conductive Rubber Pad Keypads for Sony PlayStation 4 PS4 Controller for Dualshock 4 Buttons Repair Replacement Part

PS4 Controllers
Onyehn 4 Set Silicone Conductive Rubber Pad Keypads for Sony PlayStation 4 PS4 Controller for Dualshock 4 Buttons Repair Replacement Part Cover
Buy on Amazon Find on eBay
NOTE: IT IS FOR OLD PS4 (US VERSION) NOT FOR PS4 PRO AND PS4 SLIM
COMPATIBLE WITH PS4 JSD001/JDM001 JSD011/JDM011 WIRELESS CONTROLLERS
High quality replacement for damaged or broken rubber conductive pad
Soft buttons serve as conductive pads placed under the main buttons to touch the main board
Package Includes: 4 Set x Replacement Rubber Conductive Pad For Playstation 4 PS4 Controller

Onyehn FAQs

Yes, Onyehn is a legitmate brand on Amazon. After conducting a comprehensive analysis of 4,655 customer reviews for Onyehn products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Onyehn has achieved a respectable rating of 4.2 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Onyehn on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Onyehn and want to find more Onyehn products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Onyehn in the search box and hit Enter to see the search results.
  3. Find and click the correct Onyehn to go to the new page.
  4. Select the products you want in the Onyehn buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Onyehn products.

We analyze millions of Onyehn products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 140 Onyehn products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Onyehn page.
  2. Select the product you want in the Onyehn buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Onyehn 1 Sets Console Cable RP2040 CPU Cable Chip..., you can view it on Amazon page.
  3. Place your order on Amazon.

Our mission is to provide you with the most up-to-date and objective information about the Onyehn products, helping you make more informed buying decisions. We recommend best choices of the products from the Onyehn brand, helping you make better shopping choices with less time and energy.

Similar Brands

Fintie thumbnail
Fintie
HiLetgo thumbnail
HiLetgo
Honeywell thumbnail
Honeywell
X10 thumbnail
X10
PowerA thumbnail
PowerA
HORI thumbnail
HORI
Nintendo thumbnail
Nintendo
Ivoler thumbnail
Ivoler
Mumba thumbnail
Mumba
HyperX thumbnail
HyperX
AFUNTA thumbnail
AFUNTA
BENGOO thumbnail
BENGOO
SteelSeries thumbnail
SteelSeries
Kulannder thumbnail
Kulannder
Linkhood thumbnail
Linkhood
MOLICUI thumbnail
MOLICUI