Skip to content
PowMr feature image

PowMr

4.2 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, PowMr has 73 products for sale. PowMr products range in price from $35.99 to $1699.99, and the average price of all the products is about $662.52. You should take everyting into consideration before buying the products, after all, it is not a small expenditure for most consumers.

You can confidently purchase PowMr products from the seller PowMr. The brand holds an average rating of 4.2, testifying to its excellent reputation.

Share

PowMr Best Sellers

Last Updated: Jan 12, 2025

PowMr 5000W Solar Inverter 48V DC to 110V/240V AC Split Phase Inverter Pure Sine Wave Power Inverter with 100A MPPT Controller 5000W Hybrid Inverter, Max.PV Input 5500W, 500VDC, Parallel 6 inverters

  • [Pure Sine Wave All-in-One Inverter] 5000W DC 48V hybrid solar inverter, single-phase,split Phase and three-phase 120/208V/240Vac Output pure sine wave inverter( JUST ONLY TWO INVERTERS ARE NEEDED TO OUTPUT 240V/208V IN SPLIT PHASE, UP TO 10000W ), Built-in 100A MPPT solar charge controller,Max.PV Power:5500W, Max.PV Input VOC: 500V DC, Max PV Charging Current: 100A , support 48V Lead acid or lithium battery or batteryless mode; support Parallel up to 6 inverters.
  • [Peak-Valley Electricity Tariff] Through sectional charging/discharge function, users can freely set the battery discharge time or mains carging time within the rangeof 00:00 to 23:59(3 definable periods) according to your local electricity tariff standards; BT1ST Mode--Sectional Charging Function(Mains Charge); AC1ST Mode--Sectional Discharge Function(Battery Discharge).
  • [Intelligent Power Saving] Power saving mode available to reduce no-load loss, when the ECO mode is enabled, if the load is below 50W, the inverter output is delayed for 5 mins and then the output is turned off. When the hull switch is pressed to the ""OFF"" State, and then pressed to the ""ON"" State, the inverter will resume the output.

PowMr 6200W Solar Inverter 48V DC to 220V-230V AC, 5.5KW Pure Sine Wave Inverter with 120A MPPT Charge Controller, for 48V Lead-Acid and Lithium Battery, Can be Parallel up to 12 inverters

  • [New Upgrade Solar Inverter] 6.2KW Solar Hybrid Inverter Output Voltage Regulation: 230Vac±5%, PV Rated Power: 6500W; Max PV Array Open Circuit Voltage: 500VDC, PV Array MPPT Voltage Range: 60VDC~450VDC, Max AC Input Voltage: 300Vac, Max Input Current: 27A.(Note: This inverter has a single-phase 220V output. If you need a single-phase 110V output, you need to use it with a transformer.)
  • [Multiple Battery Options] 6200W Solar Inverter built in 120A MPPT Charge Controller. New Upgrade Pure sine wave inverter, for 48V Lead-Acid(Seal, AGM, Gel, Flooded)/Lithium battery and can running without battery.
  • [Four Safe Charging Modes] 48V Inverter support four charging modes: Solar first/Utility first/Solar and Utility/Only Solar. Four output modes can be set. Solar priority/Utility priority/Inverter priority/SBU priority/SUB priority, which can meet users' different application needs.

PowMr 60AMP MPPT Charg Controller, Fit for 12V 24V 36V 48V Lead-Acid Lithium Battery, MAX 160V 2880W Input Solar Charge Controller

  • [60A MPPT CHARGING CONTROLLER] 4-stage battery charging algorithm for a rapid, efficient , safe charging(Bulk Charge, Boost Charge, Float Charge,and Equalization), 60amp Rate Charging current.
  • [Controller WIDE RANGE SOLAR VOLTAGE/POWER SUPPORT] Controller support High PV Input Power/voltage. Controller can accept Solar voltage up to 190V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC20V~DC80V;1440W 105V when 24V; 2100W 150 when 36V; 2800W 150v when 48V.
  • [12V/24V/36V/48V BATTERY SUPPORT] Negative grounding design controller more safe, controller Compatible with a variety of batteries(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according your need.

PowMr 3200W Solar Inverter, 24V DC to 120V AC with 60A MPPT Controller and 40A AC Charger Built-in, Pure Sine Wave Power Inverter 3200Watt, Max.PV Input 108V, Fit for Lithium Battery and Lead-Acid

  • [Technical Specifications] Rated Output: 3200W, 120Vac±5%. Rated battery input voltage: 24V (Minimum starting voltage 22V). Max PV Input: 1600W. Max. PV open-circuit voltage: 108Vdc. AC Rate Input/output: 120Vac±5%. Max. hybrid charging current (AC charging + PV charging): 100A
  • [Upgraded Solar Inverter] This 3200W solar inverter operates at 24V with a 110Vac output. It utilizes full digital voltage and current double closed-loop control, advanced SPWM technology, and delivers a pure sine wave output. Additionally, it features a built-in 60A Mppt controller and a 40A AC Charger, supporting Utility, Generator, and Solar Charge sources
  • [COMPATIBLE BATTERY TYPE] Rated battery input 24V, the inverter works with 24V lead-acid batteries, including Seal, AGM, Gel, and Flooded types, as well as lithium batteries

PowMr 3200W Solar Inverter 24V DC to 110V/120V AC, 3.2KW Pure Sine Wave Hybrid Inverter with 100A MPPT Controller, Max. 108V PV Input, for 24V Lead-Acid and Lithium Battery

  • ​​[3200W Solar Hybrid Inverter] This 3200W pure sine wave inverter is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. Supports to convert DC 24V to AC 110V/120V and output pure sine wave.
  • [Technical Specifications] Rated Output Power: 3200W; Rated output voltage: 120Vac±5%; Rated battery input voltage: 24V (Minimum starting voltage 22V); Peak power: 6000VA; Max. PV open-circuit voltage: 108Vdc; Max. hybrid charging current (AC charging + PV charging): 100A.
  • [LCD Display&Real-Time Monitoring] The solar inverter is designed with an LCD display and 3 LED indicators that dynamically display system data and operating status for easy viewing. Intelligent variable speed fan to efficiently dissipate heat and extend system life.

PowMr MPPT Solar Charge Controller 60 amp 48V 36V 24V 12V Auto - Max 160VDC Input, LCD Backlight Solar Charge Controller for Vented Sealed Gel NiCd Lithium Battery【Software Update Version】

  • [Software Update MPPT Design ] 100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%. Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller.
  • [Multiple Battery Adaptation] Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording. Two connectors for each pos and negs on solar and batteries connectors. copper wires:9AWG.
  • [Full System Protection] Backlight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature. TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters.

PowMr 10000W Hybrid Solar Inverter, 48V DC to 110V/240V AC Split Phase Inverter with 200A MPPT Controller, Max PV Input 11KW, 500VDC, Supports Up to 6 in Parallel, for Lead Acid Lithium Battery

  • [UPGRADED NEW-PARALLEL VERSION] Powmr 48V split-phase solar inverter supports both split-phase and single-phase pure sine wave output. A single 10k inverter can output 120V and 240V simultaneously via separate connections. Upgraded to support parallel operation for expanding capacity up to 60kW, with a maximum of 6 inverters in parallel
  • [TECHNICAL SPECIFICATIONS] Rated output :10000Watt continuous (with surge up to 20000W). Rated output voltage: 120/240Vac (split-phase/single-phase). Maximum PV input power: 11KW (5500W per MPPT input). Maximum PV input: 500V DC and 22A. The PV starting voltage: ≥150V, and it uses 10AWG PV wire. Communication ports: CAN, USB, and RS485 interfaces
  • [DUAL 100A MPPT CONTROLLER BUILT-IN] Features dual 100A MPPT controller with 99.9% efficiency and up to 22A current per circuit, ideal for high-power modules. Enables connection of two solar inputs with simultaneous tracking for maximum power point. Supports both split-phase and single-phase pure sine wave output configurations

PowMr 3600W Solar Inverter 24V DC to 110V AC, Pure Sine Wave Power Inverter with 120A MPPT Controller and 80A AC Charger, Max.PV Input 4200W, 500VDC, fit for 24V Lead-Acid and Lithium Batteries

  • [Technical Specifications] Rated Output Power: 3.6kW pure sine wave, 24V DC to 120V AC. Maximum PV open circuit voltage: 500Vdc, PV array MPPT voltage range: 60-500Vdc, Maximum PV input power: 4200W, 18A. Rated grid input voltage: 110/120Vac. Max hybrid charging current (AC charger+PV charger): 120A. Support RS485 and RS232 communication
  • [3 Charge and 3 Load Output Modes] Support 3 charging modes: Solar Only, Mains Only, Mains & Solar hybrid charging; 3 load output working modes: utility priority, solar priority, or solar and SBU Priority
  • [Compatible with Various Batteries] Compatible with various batteries such as AGM, Gel, Lead-acid, Lithium-ion and LiFePO4 batteries, and support Batteryless mode: power the loads from PV/AC grid without battery connected

PowMr 6500W Hybrid Solar Inverter, 48V DC to 110V/240V AC, Split Phase Inverter with 140A MPPT Controller, Max PV Input 10KW, 500VDC, Supports Up to 6 in Parallel, for Lead Acid Lithium Battery

  • [Split-phase Solar Inverter, Support UP to 6 Connect in Parallel] This split-phase inverter provides both split-phase and single-phase pure sine wave output. A single 6500W unit can deliver 120V and 240V simultaneously through separate connections. Additionally, you can expand your system by connecting up to 6 units in parallel, allowing for a total capacity of up to 39kW
  • [Key Specifications] Inverter Type: Solar Inverter, 48V with built-in 140A (70*2) MPPT controller. Rated Output Power: 6500W continuous (Surge: 13000W). Rated Output Voltage: 120/240Vac (supports both split-phase and single-phase). Max. PV Input Power: 10kW (5000W * 2). Max. PV Input Voltage: 550Vdc. Max. PV Input Current: 18A. PV Starting Voltage: >150V. Communication Support: CAN, USB, and RS485
  • [Single/Split-phase mode] : In split-phase mode: Output Voltage Range (L-N): 100~120Vac, 120Vac default, Output Voltage Range (L-L): 200~240Vac, 240Vac default. In single phase mode: Output Voltage Range (L-N): 100~120Vac, 120Vac default.

3600W Solar Inverter 24VDC to 110V/120VAC, Built-in 120A MPPT Controller, 3600 watt Pure Sine Wave Power Inverter, Max.PV Input 4200W, 500V, fit for 24V Lead-Acid/Lithium Battery

  • [Technical Specifications] Rated Output Power: 3.6kW pure sine wave, 24V DC to 120V AC. Max PV Input: 4200W, 500V(VOC), 18A; Max.PV output: 120A; Hybrid charging Max charger current (AC charger+PV charger): 120A; PV Starting voltage >60V, suggest all solar panels in series. Support RS485 and RS232 communication, Suggest PV and AC cable size: 12awg
  • [LED Display Screen] The Inverter LED display offers real-time system information and status, allowing users to adjust the input voltage range, set battery charging current, and prioritize AC and solar charging, thus enhancing the inverter's efficiency and functionality
  • [3600W solar inverter] Pure Sine Wave Solar Inverter 24V 110Vac adopts full digital voltage and current double closed-loop control, advanced SPWM technology. It is a new solar inverter charger built-in 120A Mppt controller and an 80A AC Charger. Support Utility, Generator, and Solar Charge

PowMr Solar Hybrid Inverter 3000W 24VDC to 110VAC, 3KW Off-Grid Hybrid Inverter with 80A MPPT Charge Controller, for 24V Lead-Acid and Lithium Battery

  • [3KW Solar Inverter] 3000W pure sine wave inverter 24VDC to 110V/120VAC, Built-in 80A MPPT charge controller. With full digital voltage and current double closed loop control and advanced SPWM technology, the charging efficiency is up to 99.9%. With high safety performance, it can protect your home circuit!
  • [Technical Specifications] 3KW Solar Inverter Rated output Voltage: 120Vac±5%; Peak power: 6000VA; MPPT Voltage Range: 120~400Vdc, Max PV Output Power: 4000W. Hybrid charging Max charger current (AC charger+PV charger): 80A.
  • [Multiple Protection Functions] LCD display design and 3 LED indicators dynamically display system data and operating status for easy viewing, while the inverter also has short circuit protection, overload protection, reverse protection, overvoltage and undervoltage protection, which greatly ensures your circuit and power safety.

10000W Split Phase 48V DC to 100V AC~240V AC Solar Inverter,UL1741 10KW Pure Sine Wave Hybrid Inverter with 200Amp MPPT Charge Controller, Work with 48V Lead Acid and Lithium Battery

  • [10KW Solar Inverter] This is a solar inverter with both single-phase and split-phase functions. Is a new type of solar energy storage inverter control inverter integrating solar energy storage & utility charging and energy storage, AC sine wave output. It adopts DSP control and features high response speed,reliability, and industrial standard through an advanced control algorithm.
  • [Technical Specifications] : Max.PV array power:11000W, Max.MPPT Charging Current:200A, Rated Output Power:10000W, Max.Peak Power:20,000W, Rated Output Voltage:120/240Vac(split phase/single phase) , Max.Voltage of Open Circuit:500Vdc.Embedded Interfaces:RS485 / CAN / USB / Dry contact.
  • [Single/Split-phase mode] : In split-phase mode: Output Voltage Range (L-N): 100~120Vac, 120Vac default, Output Voltage Range (L-L): 200~240Vac, 240Vac default. In single phase mode: Output Voltage Range (L-N): 100~120Vac, 120Vac default.

PowMr 10000W 48V Solar Inverter, 110V/240V Split Phase Pure Sine Wave Inverter with 100A MPPT Controller, Off-Grid Hybrid Inverter, Support Parallel 6 inverters, for Lead Acid and Lithium Battery

  • [Pure Sine Wave All-in-One Inverter] You will GET TWO 5000W INVERTER, connect in parallel to split phase output 110V/240V, output up to 10000W; Built-in 100A MPPT solar charge controller, Max.PV Power:5500W, Max.PV Input VOC: 500V DC, Max PV Charging Current: 100A ,support Parallel up to 6 inverters, With Li-ion battery Activation Function.
  • [Peak Shaving & Valley Filling] Efficiently store excess solar power for nighttime use with this system. Through timer-controlled peak and valley power conversion, it stores excess solar energy during the day to power home appliances during evening peak hours, reducing electricity expenses while ensuring reliable electricity usage. When the battery discharge time is set to zero, the inverter can be used as a UPS power supply.
  • [ Support Up to 6 Units in Parallel Connection] It allows connection of up to 6 units simultaneously. This configuration grants a total power output of up to 30000kW, catering to various applications such as residential, office, commercial, and industrial use.Support 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; mains bypass and inverter output two output mode, uninterrupted power supply.

PowMr 5000W Solar Inverter 48VDC to 110V/220VAC, 5kW Off-Grid Hybrid Inverter w/ 120A MPPT Charge Controller Built-in, Pure Sine Wave Inverter for 48V Lead-Acid and Lithium Battery, Peak Power:15000W

  • [New Version with 110V/220V Output] Based on the original design that only outputted 110V, we have upgraded this hybrid solar inverter so that it can now output both 110V and 220V, meeting the power requirements for different scenarios
  • [Peak Power Up to 15000W] This advanced inverter outperforms typical 48V 5000W models by incorporating a larger toroidal transformer. This upgrade increases its load capacity, allowing it to handle peak power up to 15000W. Ideal for both residential and commercial environments, it provides enhanced stability and reliability in power delivery
  • [Technical Parameters] Max PV input power: 6400W, Maximum PV input current: 120A, MPPT input voltage range: 60-150VDC, Maximum AC input current: 29A,Rated output power: 5000W (Peak power: 15000W), Output frequency: 50Hz/60Hz, Output voltage: 110Vac ±10%

PowMr 2400W Solar Inverter, 24VDC to 110V/120VAC, Pure sine Wave Inverter with 50A PWM Charge Controller, Suitable for Homes, RV and can be Used with 24V Lead-Acid (FLD, SLA, AGM,Gel) Batteries

  • [2400W Solar Inverter] 2400W pure sine wave inverter 24VDC to 110V/120VAC, Built-in 50A PWM charge controller. With full digital voltage and current double closed loop control and advanced SPWM technology, the charging efficiency is up to 95%. Pure Sine Wave,high safety performance could protect home circuit!
  • [Important Specifications] 2.4KW Solar Inverter Rated output Voltage: 110Vac±10%; PWM Voltage Range: 30~32Vdc; Hybrid charging Max charger current: 50A; Max.PV Array Open Circuit Voltage:80V; Fit for24V Lead-Acid (Flooded,SLA, AGM,Gel)
  • [Multiple Charging Modes] Four charging modes of 24V Inverter can be selected: solar/utility priority/solar priority/utility hybrid charging. Three output modes can be set. PV priority/Utility priority/Inverter priority, which can meet different application needs of users. The Inverter designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.

60A Solar Charge Controller MPPT 12V 24V 36V 48V Controller 60amp Solar Charge Regulator MPPT 150V w/LCD Display Work with AGM, Gel, Flooded and Lithium

  • [60A MPPT CHARGING CONTROLLER] :4-stage battery charging algorithm for a rapid, efficient , safe charging(Bulk Charge, Boost Charge, Float Charge,and Equalization), 60amp Rate Charging current
  • [WIDE RANGE SOLAR VOLTAGE/POWER SUPPORT] :Controller support High PV Input Power/voltage. Controller can accept Solar voltage up to 190V. When battery is 12V system: Suggest Solar power 720W, range:DC20V~DC80V;1440W 105V when 24V;2100W-150V-36V;2800W-150V-48V
  • [12V/24V/36V/48V BATTERY SUPPORT] :Negative grounding design controller more safe, controller Compatible with a variety of batteries (lead-acid, lithium, Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, User-defined, etc.)

PowMr 10000W Hybrid Solar Inverter, 48V DC to 110V/240V AC Split Phase Inverter with 200A MPPT Controller, Max PV Input 11KW, 500VDC, Supports Up to 6 in Parallel, for Lead Acid Lithium Battery

  • [UPGRADED NEW-PARALLEL VERSION] Powmr 48V split-phase solar inverter supports both split-phase and single-phase pure sine wave output. A single 10k inverter can output 120V and 240V simultaneously via separate connections. Upgraded to support parallel operation for expanding capacity up to 60kW, with a maximum of 6 inverters in parallel
  • [TECHNICAL SPECIFICATIONS] Rated output :10000Watt continuous (with surge up to 20000W). Rated output voltage: 120/240Vac (split-phase/single-phase). Maximum PV input power: 11KW (5500W per MPPT input). Maximum PV input: 500V DC and 22A. The PV starting voltage: ≥150V, and it uses 10AWG PV wire. Communication ports: CAN, USB, and RS485 interfaces
  • [DUAL 100A MPPT CONTROLLER BUILT-IN] Features dual 100A MPPT controller with 99.9% efficiency and up to 22A current per circuit, ideal for high-power modules. Enables connection of two solar inputs with simultaneous tracking for maximum power point. Supports both split-phase and single-phase pure sine wave output configurations

15A 12V/24V MPPT Solar Charge Controller, PowMr Power Intelligent Portable Solar Panel Controller, Max PV 180W/360W with LCD Display for 12/24 Volt Gel AGM Lead-Acid, Lithium LiFePO4 Battery

  • [100% Efficient MPPT Charge Controller] PowMr's newly upgraded 15A MPPT solar charge controller for 12V/24V battery system has maximum power point tracking function, which means maximizing the use of solar energy to charge your battery, which can help you save a lot of charging time compared with other products.
  • [Portable Mini Charge Controller] This solar charge controller combines an LCD display and convenient button design, allowing you to easily monitor the working status of the solar panels and batteries. Its compact internal structure design not only reduces the overall size and weight of the controller, but also enhances its flexibility for use in a variety of different scenarios.
  • [Suitable for Various Batteries] Compatible with a variety of 12V/24V batteries, such as AGM, Gel, Deep Cycle, Sealed, Lead Acid, Flooded and LiFePO4 lithium batteries. Perfect for deep cycle, starter, marine, automotive, powersports, etc.

PowMr MPPT Solar Charge Controller 60A,12V/24V/36V/48V Auto 60 amp Solar Charge Controller Backlight LCD Display Solar Panel Regulator Charge Controller for Sealed Lead Acid Flooded Gel and Li Battery

  • [Excellent heat dissipation] Die-cast aluminum design ensures good heat dissipation performance, reduces noise and saves energy; Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%. It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.
  • [Upgraded 0 Layer Design] 0 Layer, easy installation, easy setup; Simply connect the batteries, and the controller will automatically determine the battery voltage. Multifunctional Backlight LCD display for displaying system operation information, customizable parameters, and error codes.
  • [Multiple Battery Adaptation] Automatically detects 12V, 24V, 36V or 48V DC system voltages, Compatibility with multiple battery types for convenient use: sealed lead-acid, flooded, gel or lithium batteries which must be deep cycle, which is suitable for RVs, Commercial Vehicles, Boats, Yachts, and any off-grid system.

PowMr 3600W Solar Inverter 24Vdc to 110Vac,Pure Sine Wave Power Hybrid Inverter 3600 watt Built-in 120A MPPT Charge Controller Max PV Input 4.2KW 500V, for 24V Lead-Acid/Lithium Battery

  • 3600W Solar Inverter: This solar inverter is designed for 24V system, provides 110V AC pure sine wave output, and has a built-in 120A MPPT controller. It combines full digital voltage and current dual closed-loop control with advanced SPWM technology to ensure stable power supply.
  • Technical Specifications: 3600W pure sine wave inverter 24V DC to 120V AC. Max. PV input: 4200W, 500V (VOC), 18A; Max. PV output: 120A; Max. charger current (AC charger + PV charger): 120A; PV starting voltage >60V, it is recommended that all solar panels be connected in series.
  • Charging/Load Operating Modes: This off-grid solar inverter provides three battery charging modes: Solar Priority, Solar and Utility Hybrid, and Solar Only. Additionally, users can choose from three load output modes: Utility Priority, Solar Priority, or Solar and SBU Priority, to meet various application needs.

PowMr FAQs