IAG Performance Top 20 Products from Automotive Replacement Parts Brand

IAG Performance Multi-Directional Hose Clamp Pliers (for fuel lines, radiator hoses, hold clamps)

The IAG Performance Pliers are best suited for use with our Air Oil Separator spring-style hose clamps. The specially designed jaws easily hold and compress the clamps making for an easy install.

No more surprises by flying hose clamps! Making installing and removing hose clamps much easier at all angles and in tight spaces.

Great for VAG, SEAT fuel line and tank ventilation line clamps, radiator / coolant hose clamps.

Specially formed jaws for holding spring hose clamps. Stripe surface with intersected slots.

Comfort red grip handles, strong steel construction.

IAG EZ-Step for Jeep Wrangler 2018+ 4 Door & Gladiator 2020+ w/OEM rockrails (Black Logo Plate, 2 Pair)

Step Rails

Buy on Amazon Find on eBay

FITMENT NOTE - The IAG EZ-Steps offer a seamless fitment, but they require that your 2018+ Wrangler or 2020+ Gladiator 4 door is equipped with OEM rock rails for proper installation. Designed to attach directly to the rock rails, these steps are incompatible with larger aftermarket rock rails or non-standard configurations.

EZ-STEP MAKES GETTING IN & OUT EASY - Getting in and out of the Wrangler or Gladiator can be a challenge, especially if the vehicle has been lifted. If you, or your passengers, could use an extra step up, the IAG EZ-Step Add-On is the perfect solution. The EZ-Step is engineered to fit your OEM rock rails, providing a smoother entry and exit. Best of all, the sturdy foothold eliminates the need to step on the painted door sills, protecting them from scuffs, scratches, and wear.

MADE IN THE USA - We're proud to say that our products are manufactured right here in our facility in Westminster, MD. IAG Performance was founded in 2007 as an innovator in performance products. We offer a wide variety of problem-solving aftermarket products. Our friendly, USA based, staff is also here to help with any installation questions you might have.

EASY TO INSTALL - Each EZ-Step includes a sturdy, easy-to-install steel bracket that secures the step firmly in place and adds extra support beneath the foothold. Depending on the fitment of the rock rail, it may be necessary to install the provided spacers, but it's an easy task that will only need to be done once, and will allow for the quick installation and removal of the EZ-Steps out on the trail. No cutting or drilling is required, and the entire process takes only 10 to 20 minutes with basic hand tools in your garage.

THE PERFECT HEIGHT - The IAG EZ-Step is located at the same height as the top of the Wrangler or Gladiator's rock rail, approximately six inches lower than the door sill opening. This location offers optimal ground clearance while still ensuring improved access when getting in and out of the vehicle. This means you can enjoy all the benefits of the EZ-Steps without the worry of damaging them out on the trails.

YOUR CHOICE OF ACCENT COLOR - Built tough with TIG-welded, high-strength mandrel-bent tubing, 3/16” thick steel brackets, and a ⅛” thick aluminum foothold plate, the IAG EZ-Steps feature a black anti-skid powder-coated finish for lasting durability and added safety. Each EZ-Step comes with an eye-catching IAG logo plate—available in Red, Mojave Orange, Blue, Black, Raw Stainless, Neon Yellow, Teal, Pink, or White—allowing you to add a customized touch to compliment your exterior.

Read more Read less

IAG Trail Shield Adjustable Mud Flaps for Ford Bronco 2021+ 2/4 Door (Not Raptor or Sport), Front & Rear Set

Wheel & Tire Mud Flaps & Splash Guards

Buy on Amazon Find on eBay

IAG TRAIL SHIELD MUD FLAPS - IAG Off-Road builds products with real-world feedback in mind, and the IAG Bronco Trail Shield Mud Flaps are no exception. We've packed in the best design features to ensure maximum protection for all 2021+ Bronco trims, including Heritage and Everglades models. Built tough in the USA, the patent pending IAG Bronco Trail Shield Mud Flaps stand up to snow, mud, rocks, and debris—no matter where the road or trail takes you.

VERSATILE FITMENT OPTIONS - The IAG Bronco Trail Shield Mud Flaps surpass ordinary mud flap designs with innovative features and versatile fitment options. Sold as a complete set for the right and left front and rear wheel wells, they feature an adjustable width to fit both narrow (non-Sasquatch) and wide (Sasquatch) fenders while remaining fully compatible with Sasquatch package wheels and tires. They're designed to work with all OEM running boards, side steps, rock rails, and even OEM crash bars, making them a seamless addition to any 2-door or 4-door Bronco. Whatever your setup, these mud flaps have you covered.

BUILT TOUGH - The IAG Bronco Trail Shield Mud Flaps are built tough from super high-impact, strength modified polypropylene. With a molded topographical design that adds a subtle touch of rugged outdoor styling, these mud flaps feature black powder-coated, laser-cut brackets that fit perfectly without any bare metal clips coming into contact with your Bronco's paint. Held in place with black coated, rust-resistant stainless hardware, these mud flaps are as tough as they are stylish.

EASY TO INSTALL - Installing the IAG Bronco Trail Shield Mud Flaps is easy—no drilling or modifications to your Bronco required. The kit comes with all brackets and hardware needed for installation. With step-by-step written and video instructions, you can have this complete set of mud flaps securely in place in under 1 hour using basic hand tools, no lift or jack stands needed.

FITMENT - Fits Ford Bronco 2021+ 2 Door and 4 Door (Not Raptor or Sport)

Read more Read less

IAG V2 EZ-Lift Soft Top Assist Strut System for Ford Bronco 2023+ 4 Door w/OEM soft top, Made in USA

Buy on Amazon Find on eBay

FITMENT - Fits Ford Bronco 2023+ Ford Bronco 4 Door with OEM soft top

DIFFICULTY WITH YOUR OEM SOFT TOP? - Opening and closing the OEM Bronco soft top can be a difficult task. It often requires a second set of hands or having to climb in the back of the vehicle to operate Bronco's heavy and cumbersome soft top frame. It is virtually impossible to open or close the soft top at an even rate from side to side, which can lead to premature wear or costly damage to your top or the vehicle paint. Even basic functions like cargo access is a chore that calls for a prop rod to hold the heavy rear hatch open. Constant battles with your soft top can be very frustrating, but we've developed the perfect solution to make your factory soft top easy to use.

THE EZ SOLUTION - IAG's EZ-Lift Soft Top Assist System was designed to solve the functionality and weight issues with your 2021-22 Bronco's OEM soft top. Our EZ-Lift System incorporates the use of two gas struts that provide an extra boost to make lifting and lowering your soft top a lot easier. With our system, you can single-handedly open and close the top from the side of the vehicle without having to get help or climb into the back of your Bronco. Our EZ-Lift customers love this upgrade, and agree that it is a must-have for your 2021+ Four Door Bronco soft top.

EASY CARGO ACCESS - This convenient system provides easy access to your Bronco's cargo area and eliminates the need for the factory prop rod. Just pop the cargo release levers and let the EZ-Lift System safely hold the cargo cover open for you. The EZ-Lift struts are strong enough to handle the weight of the rear cover without any additional support, allowing you to load and unload your Bronco with ease. Additionally, the EZ-Lift System is fully compatible with the Cargo Area Security Enclosure, ensuring a perfect fit.

EXTRA FEATURES - In addition to providing a hassle-free experience in opening and closing your Bronco's soft top, IAG's EZ-Lift System features a couple of extra advantages that help to prolong the life of your top, while also preventing damage to your vehicle's interior. The lateral play commonly found in the factory soft top frame can cause the frame to rub against the canvas cover, leading to premature wear and even tears in the soft top. The frame is also known to leave rub marks and scratches on the roll bar. Our EZ-Lift System provides additional structure and rigidity to the soft top frame, which prevents lateral movement and potential damage to your soft top or roll bar.

EASY TO INSTALL - The IAG EZ-Lift Soft Top Assist System bolts directly to pre-existing mounting points on your 2021+ Bronco's OEM soft top and interior cargo area. There is no need for cutting, drilling or permanent modifications. The EZ-Lift System features full written and video instructions and includes all the necessary hardware required for installation. The entire job can be done in about 15 minutes using basic hand tools in your own garage.

MADE IN THE USA - We're proud to say that our EZ-Lift Soft Top Assist System is manufactured right here in our facility in Westminster, MD. IAG Performance was founded in 2007 as an innovator in performance products. We offer a wide variety of solutions-oriented aftermarket products. Our friendly, USA based support staff is available to help with any installation questions you might have.

Read more Read less

IAG Off-Road Intake Snorkel for Ford Bronco 2021+ 2.3L & 2.7L Hard Top (Not Sport or Raptor) - Requires permanent modification to fender

Car Air Filters

Buy on Amazon Find on eBay

BREATHE EASY OFF-ROAD - Whether you're traversing dusty trails or fording through rivers, the IAG Off-Road Snorkel raises your air intake to the roof-line of your 2021+ Bronco, ensuring a constant supply of clean air and keeping your engine dry. This prevents your air intake from becoming congested with dust, dirt, and debris. Additionally, it allows you to take on deeper water crossings without the risk of water entering your engine. The IAG Off-Road Snorkel is the perfect modification for adventurous off-roaders, keeping your engine safe while maintaining its efficiency and performance.

PROTECTION & PERFORMANCE - Driving through deep rivers and puddles without a snorkel leaves your engine vulnerable to water potentially entering the air intake and engine, which can lead to costly engine damage, or even catastrophic failure. Dust buildup in the intake can also have a negative effect on your engine; dust suspended in the engine oil can cause premature wear, which can lead to elevated oil consumption and internal damage. IAG's Off-Road Snorkel provides the solution and protection you need, both on and off-road. Situated higher than the OEM intake, this elevated intake provides access to cooler, cleaner, uncontaminated air, protecting your engine from water and debris.

REVERSIBLE VERSATILITY - The IAG snorkel is designed with versatility in mind, featuring a reversible air intake system perfect for tackling dusty environments. By simply reversing the air intake using the included block off plate, you can significantly reduce the amount of dust and debris entering your engine, keeping it cleaner and more efficient during off-road adventures. This feature ensures optimal performance, especially in harsh conditions where dust is a constant challenge. Whether you're navigating dry desert trails or dusty backroads, the reversible air intake provides an extra layer of protection, allowing your engine to breathe cleaner air.

QUALITY CONSTRUCTION - Constructed from durable ABS plastic, the IAG Off-Road Snorkel is designed for the adventurous off-roader. ABS is renowned for its strength and resistance to impacts and corrosion, making it the ideal choice for rugged terrain. Finished in a sleek black, this snorkel is both tough and stylish, but it's not just for show; this snorkel is ready to take on any trail, river or road with confidence.

INSTALLATION NOTES - For those skilled in tool use and modification, installing the IAG Off-Road Snorkel should be a straightforward task. The task requires the use of a cut-off wheel or reciprocating saw to complete, and it will be necessary to cut a passage in the right side (passenger side) fender, as well as drill two holes to install. These modifications are permanent. The snorkel mounts seamlessly on the factory Bronco intake, ensuring an exact fit for a tight seal. Please note that we recommend this part for hard top vehicles due to additional noise generated by turbulent air passing over the snorkel. Soft top vehicle owners may find the additional noise unacceptable.

Read more Read less

IAG 4PC Interior LED Dome Light Kit V2 w/Harness for Ford Bronco 2021+ 4 Door Hardtop (includes mounting brackets)

Automotive Dome Light Bulbs

Buy on Amazon Find on eBay

LET THERE BE LIGHT - The IAG LED Dome Light Kit adds some much needed interior lighting to your 2021+ Bronco Two Door Hardtop or 4 Door Soft Top. Designed to bolt to the existing hardware above each door, these super-bright LED dome lights shine directly down to provide just the right amount of light for your passengers. The included module and harness is easy to install, without the need for any wiring beneath the dash. Once installed, the lights work seamlessly with your factory overhead console button.

WORKS WITH THE OEM SWITCH - IAG's LED Dome Light Kit is engineered to seamlessly integrate with yourBronco's factory overhead console button, offering convenient control of the lighting system. It can also be configured to be controlled with an auxiliary switch if desired. This easy to install, easy to use upgrade is the perfect solution to light up your Bronco's interior, while keeping the control right at your fingertips.

SUPERIOR LED TECHNOLOGY - The IAG LED Dome Light Kit works just like your 2021+ Bronco's stock lights, but much brighter. This lighting system upgrade improves upon Bronco's original design by adding four dome lights above each door for full-coverage illumination of your rear seating area. Each of the included dome lights incorporate the use of ultra bright LED lights. LED lights can last up to 40 times longer than a regular halogen bulb, prolonging the lifespan of your updated dome light system.

PLUG AND PLAY INSTALLATION - IAG's V2 LED Dome Light Replacement Kit features a user-friendly design that is a breeze to install. No under dash wiring is needed, and there's no need to cut or strip wires. The entire installation can be completed in under 45 minutes, thanks to the plug-and-play design of the upgraded harness and module. Simply mount the dome lights above the doors with the OEM hardware, connect a single plug and play connector at the rear seat overhead dome light harness, and you're all set.

FITMENT - Fits Ford Bronco 2021+ 4 Door Hardtop (NOT Sport)

Read more Read less

IAG I-Line Hood Pad Isolator Reduces Engine Noise for Ford Bronco 2021+ 2/4 Door (Not Sport) - Flocked (Black)

Car Insulation

Buy on Amazon Find on eBay

FITMENT - Fits Ford Bronco 2021 2022 2023 2024+ Two and Four Door (Not Sport). BEFORE ORDERING: Please check under your hood to ensure your Bronco does not already have a OEM insulation pad.

DECREASES ENGINE NOISE AND HOOD VIBRATION - The IAG I-Line Hood Pad Isolator is designed to quiet engine noises and hood vibration on the 2021+ Ford Bronco. Constructed of a flocked fiber material, the attractive hexagon pattern on the pad adds a touch of style under the hood while providing an additional layer of protection from the heat of the engine bay.

EASY TO INSTALL AND REMOVE - The I-Line Hood Pad Isolator is easy to install. Installation requires no cutting, drilling, or permanent modification. The pad is installed using existing holes in the hood and the included plastic clips.

LASER MEASURED FOR PERFECT FITMENT - The I-Line Hood Pad Isolator is designed to perfect fit the underside of your Bronco's hood. Using a sophisticated laser measuring device, the shape of the hood was computer mapped to ensure and exact fit.

BEFORE ORDERING: Please check under your hood to ensure your Bronco does not already have a OEM insulation pad.

Read more Read less

IAG Performance Air/Oil Separator (AOS) for Subaru Impreza WRX 08-14, STi 08-21 (Black)

Car Reservoirs

Buy on Amazon Find on eBay

KEEPING OIL OUT - Keeping oil out of the engine intake tract is extremely important towards preventing premature mechanical failure and maintaining performance. Oil in the intake tract of the engine has several detrimental effects. The oil coats the internal portions of the intake, intercooler, and piping. This oil may cause premature failure of rubber or silicone hoses, which leads to failed connections.

ORB PORTS - Aluminum body is powder coated in Red or Black Wrinkle Finish. The side of the AOS features 3 -8 ORB removable billet hose barbs. The EJ engine has 3 ports that vent crank pressure: one on each cylinder head, and another on the top of the block. Each engine vent port receives its own connection to the AOS. By giving each engine port its own entrance to the AOS, IAG has allowed for more effective and faster excavation of crankcase pressure.

SWIRL POT - The IAG Performance AOS' large, 1-liter, cast aluminum swirl pot canister more effectively separates oil from the PCV system upstream of PCV gasses return to the intake system. The IAG AOS' fully-heated cast aluminum housing, superior venting, and unique baffle design set it apart from the rest. The AOS is compatible with all fuel types, extends engine life, improves crankcase ventilation and is compatible with standard ECU calibrations.

TESTED FOR YEARS - The IAG Performance Street V3 Air / Oil separator (AOS) is an excellent investment to keep your EJ engine running well. The AOS maintains OEM PCV system functionality, but supplements its capacity. The IAG AOS design is based on years of extensive testing on standard and competition applications.

AOS BODY - Compact cast aluminum design has approximate 1 liter holding capacity integrated.

Read more Read less

IAG V2 EZ-Step for Ford Bronco 2021+ w/rockrails (4 Door, Orange Logo Plate, 2 Pair) (Does not fit Raptor or Sport)

Step Rails

Buy on Amazon Find on eBay

FITMENT - Fits Ford Bronco 2021+ 4 Door with rockrails (DOES NOT FIT: Raptor Style Rock Rail option or OEM Hoop Step Rock Rail option. DOES NOT FIT: Bronco Sport and Bronco Raptor models)

MAKES GETTING IN & OUT EASY - Stepping in and out of the new Bronco can be a bit of a challenge for some, especially if the vehicle has been lifted. Whether you or one of your family members need a little boost, the IAG EZ-Step System provides just the solution to make getting in and out easy. The EZ-Step Bronco Side Step System is designed to mount to the standard OEM rock rails found on many 2021+ Bronco models.

EASY, 15 MINUTE INSTALLATION - Our unique pinch clamping system allows the EZ-Step to install virtually anywhere along the rock rail, enabling you to find the perfect location for entering or exiting the vehicle. The simple two-bolt installation takes a few minutes and does not require drilling or cutting. The steps are easily removable trailside for more serious off-roading. The clamping system includes foam pads that protect the OEM rock rail from finish damage during mounting.

SITS 2" BELOW THE TOP OF THE OEM ROCK RAIL - The V2 EZ-Step is located approximately two inches below the top of the OEM rock rail. This location allows easy access to the vehicle while still maintaining good ground clearance. OEM Standard Rock Rails are required for installation. With this mounting location the step height is lowered by approximately seven inches from the door sill opening. The added foothold prevents the need to step on the painted door sills or to slide across the seats. The textured black powder coat on the EZ-Step prevents slippage and adds a unique look to the exterior of the vehicle.

CUSTOMIZE YOUR EZ-STEPS WITH COLOR PLATES - The EZ-Steps are TIG welded and feature high-strength mandrel-bent tubing with 3/16” thick steel brackets and ⅛” thick aluminum plate. The EZ-Step is finished in an attractive, black anti-skid powder coat finish for durability and safety. The Bronco side steps feature the ability to customize the look by choosing one of our IAG logo plate sets. Select from our original colors—Black, Blue, Orange, Red, or Stainless—or go with one of our new color options like Area 51, Teal, Neon Yellow, Pink, or White to match your Bronco and add a stylish touch.

MADE IN THE USA - We're proud to say that our products are manufactured right here in our facility in Westminster, MD. IAG Performance was founded in 2007 as an innovator in performance products. We offer a wide variety of problem-solving aftermarket products. Our friendly, USA based support is also here to help with any installation questions you might have.

Read more Read less

IAG Performance Oil Pickup & Upper Windage Tray for Subaru WRX 02-14, STi 04-21, Legacy GT 05-09, Forester XT 04-13

Engine Oil Pump Pick-Up Tubes & Screens

Buy on Amazon Find on eBay

THE IAG PERFORMANCE V2 OIL PICKUP - Oil pickups are a critical failure point in the EJ25 engines, especially when pushing your car to its limits. The OEM pickups are known to crack and fail, leading to severe engine damage or even catastrophic failure. The IAG Performance Oil Pickup for the 2002-2014 WRX, 2004-2021 STI, 2005-2009 LGT and 2004-2013 FXT models is designed to solve this issue altogether. With an enhanced design that increases strength and durability, it offers a dependable solution to the common problems with OEM oil pickups. IAG's Oil Pickup will keep your engine performing at its best, no matter how hard you drive.

PERFORMS UNDER PRESSURE - The IAG Performance Version 2 Oil Pickup is a significant upgrade over the OEM EJ25 oil pickup. Factory pickups are well-known for their tendency to crack, resulting in catastrophic engine failure due to oil pressure loss. Our redesigned stainless steel version addresses this common issue, offering superior durability and reliability. Built to withstand the rigors of high-performance driving, this upgraded pickup stands up under pressure, minimizing the risk of cracking and failure.

STAINLESS STEEL CONSTRUCTION - To prevent the cracking issues common with OEM oil pickup tubes, this version is crafted from stainless steel tubing that is twice as thick as the factory design. It also features a precision-machined 3/8" stainless steel flange that is sealed with a Viton O-ring for a secure connection to the engine block. The reinforced stainless steel mounting bracket uses two mounting points for added stability, compared to the single-point design of the OEM version. Furthermore, the oil pickup features a formed bottom with an OEM style mesh screen for reliable filtration.

IAG VS. OEM - Since the oil pickup is responsible for delivering oil to the rest of the engine, its reliable performance is vital. The IAG Performance Oil Pickup surpasses the OEM version in several key ways. Here are the key improvements that set it apart: Pickup features stainless steel tubing that is 2x thicker than OEM. Two-point heavy-duty mounting bracket provides a sturdy stand to hold the pickup solidly in place. Precision TIG-welded construction ensures a durable bond while maintaining a sleek, professional finis

RIGOROUSLY TESTED - We're confident that the IAG Performance Oil Pickups are the best available on the market, and we've got the data to prove it. We've rigorously tested our pickups and compared them against the OEM pickup, along with some of the most popular competitive products available. Click here to see the comprehensive test results and find out why IAG Performance stands out from the competition.

STRAIGHTFORWARD INSTALLATION - The IAG Performance V2 Oil Pickup is specifically designed to mount seamlessly to the inlet of your 2002-2014 WRX, 2004-2021 STI, 2005-2009 LGT and 2004-2013 FXT engine block in the original factory position. It includes all the necessary mounting bolts and an o-ring for a straightforward installation—no engine modifications or extra parts are required. If you're seeking a reliable way to enhance the protection and longevity of your EJ engine, IAG's Oil Pickup is the ideal solution.

COMBO PACKAGE INCLUDES IAG'S WINDAGE TRAY - The IAG Windage Tray directs the oil from the upper crankcase down into the lower crankcase and oil pan area. Constructed of stainless steel, its precision-formed louvers guide oil downward and help to keep oil that is draining from the cylinder heads in the lower crankcase area from splashing upwards into the path of the crankshaft and connecting rods, reducing aeration.

FITMENT - EJ20 WRX engines with EJ25 oil pans, All EJ25 STi engines, Fits Killer B Oil Pan with either Killer B Oil Pickup Spacer or IAG Oil Pickup Spacer Kit - PN# IAG-ENG-2081SP. Direct fit for all 2.5L 2004-21 STI, 2006-14 WRX, 2004-13 Forester XT, and 2006-09 Legacy GT. *2002-2005 EJ20 WRX requires 2.5L oil pan for fitment. 2004-05 FXT & 05 LGT Check Pan For Fitment Before Ordering.

Read more Read less

IAG I-Line Rock Rail Side Mini Mud Flap (2pc) for Ford Bronco 2021+ 2/4 Door (Requires OEM rockrails, NOT Compatible with Hoop Step Rock Rail Option or Raptor Style Rock Rail Option)

Wheel & Tire Mud Flaps & Splash Guards

Buy on Amazon Find on eBay

PROTECT YOUR PAINT - The IAG I-Line Two Piece Mini Mudflap Set includes flaps for the front of your Bronco only. Designed to mount using the OEM rock rail, no modification to the rock rail is required for mounting. Once installed these flaps provide an extra layer of protection between your tires and your paint. Mud, snow, ice, rocks, and other road debris simply bounces off of these flaps before hitting the side of your truck.

PERFECT FITMENT & EASY INSTALLATION - The IAG I-Line Mini Mud Flaps mount to the OEM rock rail found on Black Diamond and Badlands Broncos. They include the necessary hardware to mount the flaps in place. No modification of the OEM rock rail is required for installation. These mud flaps work perfectly with Sasquatch and Non-Sasquatch equipped models which feature the OEM rock rails. *Not compatible with optional OEM Removable Hoop Steps.

HIGH QUALITY CONSTRUCTION - Constructed of high quality ABS Plastic, these mud flaps resist scratching and cracking. They are designed to slip into the end of the OEM rock rail. ABS plastic is very durable and designed for this type of application.

INCLUDES - 2x Front Mud Flap, 1x Hardware Bag

FITMENT - Fits Ford Bronco 2021+ 2& 4 Door (Requires OEM rockrails - NOT compatible with Sport, Raptor or Broncos with upgraded Hoop Step Rock Rail Option and Raptor Style Rock rail option)

Read more Read less

IAG Performance V2 Oil Pickup for Subaru WRX 02-14, STi 04-21, Legacy GT 05-09, Forester XT 04-13 and EJ engines

Engine Oil Pump Pick-Up Tubes & Screens

Buy on Amazon Find on eBay

THE IAG PERFORMANCE V2 OIL PICKUP - Oil pickups are a critical failure point in the EJ25 engines, especially when pushing your car to its limits. The OEM pickups are known to crack and fail, leading to severe engine damage or even catastrophic failure. The IAG Performance Oil Pickup for the 2002-2014 WRX, 2004-2021 STI, 2005-2009 LGT and 2004-2013 FXT models is designed to solve this issue altogether. With an enhanced design that increases strength and durability, it offers a dependable solution to the common problems with OEM oil pickups. IAG's Oil Pickup will keep your engine performing at its best, no matter how hard you drive.

PERFORMS UNDER PRESSURE - The IAG Performance Version 2 Oil Pickup is a significant upgrade over the OEM EJ25 oil pickup. Factory pickups are well-known for their tendency to crack, resulting in catastrophic engine failure due to oil pressure loss. Our redesigned stainless steel version addresses this common issue, offering superior durability and reliability. Built to withstand the rigors of high-performance driving, this upgraded pickup stands up under pressure, minimizing the risk of cracking and failure.

STAINLESS STEEL CONSTRUCTION - To prevent the cracking issues common with OEM oil pickups, this was crafted from stainless steel tubing that is twice as thick as the factory design. It also has a precision-machined 3/8" stainless steel flange that is sealed with a Viton O-ring for a secure connection to the block. The reinforced stainless steel bracket uses 2 mounting points for added stability, compared to the 1-point design of the OEM version. Also, the oil pickup features a formed bottom with an OEM style mesh screen for reliable filtration. The combination of thicker materials & a 2-point mounting bracket ensures this pickup won't fatigue or fail over time like its OEM counterpart.

IAG VS. OEM - Since the oil pickup is responsible for delivering oil to the rest of the engine, its reliable performance is vital. The IAG Performance Oil Pickup surpasses the OEM version in several key ways. Here are the key improvements that set it apart: Pickup features stainless steel tubing that is 2x thicker than OEM. Two-point heavy-duty mounting bracket provides a sturdy stand to hold the pickup solidly in place. Precision TIG-welded construction ensures a durable bond while maintaining a sleek, professional finish.

STRAIGHTFORWARD INSTALLATION - The IAG Performance V2 Oil Pickup is specifically designed to mount seamlessly to the inlet of your 2002-2014 WRX, 2004-2021 STI, 2005-2009 LGT and 2004-2013 FXT engine block in the original factory position. It includes all the necessary mounting bolts and an o-ring for a straightforward installation—no engine modifications or extra parts are required. If you're seeking a reliable way to enhance the protection and longevity of your engine, IAG's Oil Pickup is the ideal solution.

FITMENT NOTE: The IAG Performance V2 Oil Pickup is compatible with the following: EJ20 WRX engines with EJ25 oil pans, All EJ25 STI engines, Fits Killer B Oil Pan with either Killer B Oil Pickup Spacer or IAG Oil Pickup Spacer Kit PN# IAG-ENG-2081SP

Read more Read less

IAG Performance Oil Control Baffle, Windage Tray & V2 Oil Pickup Combo for Subaru WRX 2002-14, 04-21 STI, 05-09 Legacy GT, 04-13 FXT

Engine Oil Pump Pick-Up Tubes & Screens

Buy on Amazon Find on eBay

IAG offers our Version 2 Oil Pickup, Baffle and Windage Tray as a complete package and even better at a reduced price instead of buying the items separately.

The IAG Performance V2 WRX / STI oil pickup replaces the OEM EJ25 oil pickup which is prone to failure. It's a well-known fact that the OEM oil pickups often crack and fail which in most cases destroys your motor from lack of oil pressure. The original IAG Performance pickup design has been improved in this all-new stainless steel version.

To avoid the cracking failures seen in the OEM oil pickup tubes, the oil pickup is manufactured from stainless steel tubing that is 2x thicker than OEM. It also features a flange machined from 3/8" stainless steel to mate with the block, sealed with a Viton O-ring. The integrated heavy-duty stainless steel mounting bracket uses two mounting points rather than the OEM single mounting point. Furthermore, the oil pickup features a formed bottom with an OEM style mesh screen for proper filtration.

The IAG Oil Control Baffle and Windage Tray System is designed to limit potential blow-by and prevent oil starvation in your EJ engine during high rpm and high g-force driving. Through the use of Viton one-way flapper valves on our baffle and louvers in our windage tray, oil is prevented from reentering the upper crankcase area and is directed down to the oil pan to ensure plentiful supply to the oil pickup.

IAG's integrated 2-piece Oil Control Baffle and Windage Tray System is designed to work with our own oil pickup, as well as other oil pickups*. The baffle fits neatly in the engine crankcase area, allowing normal installation of the OEM oil pan and popular aftermarket pans*.

FITMENT - 2002-2005 EJ20 WRX requires 2.5L oil pan for fitment. 2004-05 FXT & 05 LGT Check Pan For Fitment Before Ordering.

Read more Read less

IAG Performance Coilover Cover Sleeves (Set of 4) for Subaru coilovers

Suspension Lowering Kits

Buy on Amazon Find on eBay

PROTECT YOUR COILOVERS - IAG's Coilover Cover Sleeves provide a layer of protection against road debris such as sand, salt, and rocks. These durable sleeves wrap around your coilovers, shielding the threaded shock body and springs from corrosion while also protecting seals from premature wear. This protective barrier not only prolongs the life of your coilovers but also prevents seizing and allows for smoother suspension adjustments by keeping debris from obstructing or damaging the lock ring and adjustment threads. Best of all; the IAG Coilover Cover Sleeves are sold as a complete set of four, providing full coverage for all four coilovers on your vehicle.

DURABLE CONSTRUCTION - The IAG Coilover Sleeves are constructed from heavy-duty 3mm thick neoprene. Neoprene is a resilient synthetic rubber that is waterproof, heat and chemical resistant, while also able to stand up to road debris, even in harsh driving conditions. These sleeves are equipped with heavy-duty hook and loop closures for a secure, reliable fit, and adjustable elastic bands that create a tight seal at both the top and bottom of the suspension. Finally, each sleeve features the IAG logo printed in a striking red and white, adding a bold, custom touch to your coilover setup.

FITMENT NOTES - The IAG Coilover Sleeves measure 300mm in length and are designed to fit springs with an inner diameter ranging from 60mm to 68mm. This makes them compatible with Subaru coilovers (the majority of front and rear coilovers available on the market) If you're unsure about whether these sleeves will fit your specific setup, don't hesitate to reach out for assistance.

EASY TO INSTALL, EASY TO REMOVE - With IAG's Coilover Sleeves, installation is a snap. There's no need to dismount your coilovers—just jack up the vehicle, remove the wheel, and wrap the sleeve around the coilover. Seal it shut with the hook and loop closures for a secure fit. When it's time to make adjustments or clean the sleeves, removing them is just as easy, providing quick access to your suspension components.

Read more Read less

IAG EZ-Step for Jeep Wrangler 2018+ 2 Door w/OEM rockrails (Red Logo Plate, 1 Pair)

Step Rails

Buy on Amazon Find on eBay

FITMENT NOTE - The IAG EZ-Steps offer a seamless fitment, but they require that your 2018+ Wrangler 2 door is equipped with OEM rock rails for proper installation. Designed to attach directly to the rock rails, these steps are incompatible with larger aftermarket rock rails or non-standard configurations.

EZ-STEP MAKES GETTING IN & OUT EASY - Getting in and out of the 2018+ JL Wrangler two door can be a challenge, especially if the vehicle has been lifted. If you or your passengers could use an extra step up, the IAG EZ-Step Add-On offers an easy solution. The EZ-Step is engineered to fit your OEM rock rails, providing a smoother entry and exit. The sturdy foothold eliminates the need to step on the painted door sills, protecting them from scuffs, scratches, and premature wear. Best of all, the EZ-Steps are easy to install and remove for more serious off-roading.

MADE IN THE USA - We're proud to say that our products are manufactured right here in our facility in Westminster, MD. IAG Performance was founded in 2007 as an innovator in performance products. We offer a wide variety of problem-solving aftermarket products. Our friendly, USA based, staff is also here to help with any installation questions you might have.

EASY TO INSTALL - Each EZ-Step includes a sturdy, easy-to-install steel bracket that secures the step firmly in place and adds extra support beneath the foothold. Depending on the fitment of the rock rail, it may be necessary to install the provided spacers, but it's an easy task that will only need to be done once, and will allow for the quick installation and removal of the EZ-Steps out on the trail. No cutting or drilling is required, and the entire process takes only 10 to 20 minutes with basic hand tools in your garage.

THE PERFECT HEIGHT - Once installed, the IAG EZ-Step is located at the same height as the top of the Wrangler's rock rail, approximately six inches lower than the door sill opening. This location offers optimal ground clearance while still ensuring improved access when getting in and out of the vehicle. This means you can enjoy all the benefits of the EZ-Steps without the worry of damaging them out on the trails.

YOUR CHOICE OF ACCENT COLOR - Built tough with TIG-welded, high-strength mandrel-bent tubing, 3/16” thick steel brackets, and a ⅛” thick aluminum foothold plate, the IAG EZ-Steps feature a black anti-skid powder-coated finish for lasting durability and added safety. Each EZ-Step comes with an eye-catching IAG logo plate—available in Red, Mojave Orange, Blue, Black, Raw Stainless, Neon Yellow, Teal, Pink, or White—allowing you to add a customized touch to compliment your exterior.

Read more Read less

IAG Performance Timing Belt Kit w/Red Racing Belt, Timing Guide, Idlers & Tensioner for Subaru WRX 02-14, 04-21 STI, 05-12 Legacy GT, 04-13 Forester XT

Timing Belt Kits

Buy on Amazon Find on eBay

A COMPLETE TIMING BELT REPLACEMENT SOLUTION - The IAG Red Racing Timing Belt Kit is designed as a replacement for the OEM EJ20 and EJ25 engines. Included in the kit are high quality OEM idler pulleys, IAG's high strength red racing timing belt, our billet timing belt guide, and an OEM timing belt tensioner. These kits function as an exact replacement for the OEM timing belt found on the 2002-2014 WRX, 2004-2021 STI, 2005-2012 Legacy GT, and 2004-2013 Forester XT.

IAG RED RACING TIMING BELT - The high-strength Kevlar construction and red color make it a great choice. We have performed extensive testing of this belt on our Spintron testing machine, as well as our fleet of racing vehicles. In testing, we found that these belts ensure accurate timing and unmatched performance. The Kevlar construction is 300% stronger than the OEM timing belt, and is also three times more heat resistant. The belt teeth are made of H-NBR grade rubber for additional strength.

OEM TIMING BELT TENSIONER & IDLER PULLEY - One of the most important components in the timing system is the timing belt tensioner. Aftermarket units are known to fail prematurely, which can cause catastrophic failure. The idler pulleys included are also OEM quality units. It is more common to experience a timing idler bearing failure than it is to experience a failure of the timing belt itself. You can rest assured that these high quality components will provide a long, trouble-free life.

IAG BILLET TIMING BELT GUIDE - The IAG billet timing belt guide is the best method to prevent your EJ engine from skipping a beat. Engineered and manufactured in our facility in Westminster, MD, each guide is machined from a single piece of 6061 billet aluminum and anodized black for a protective finish. The guide is a strong replacement for the OEM piece and is also adjustable to set the proper clearance for the timing belt.

INCLUDES: IAG Red Racing Timing Belt (x1), IAG Billet CNC Machined Timing Belt Guide (x1), OEM Smooth Idler Pulley (x2), OEM FHI Timing Belt Tensioner Assembly (x1), OEM FHI Timing Belt COG (x1), OEM FHI Small Roller (x1)

Read more Read less

IAG Performance EJ Street Series Oil Pan Package for Subaru WRX, STi, LGT, FXT (Silver Pan, Pickup, Street Baffle, Windage Tray)

Transmission Pans & Drain Plugs

Buy on Amazon Find on eBay

GET THE PACKAGE DEAL - The IAG V2 Oil Pickup, Street Series Baffle, Windage Tray, along with our New Oil Pan is now available as a complete package. This package is designed to work together as a complete unit. The IAG EJ Street Series Oil Pan Package includes all the necessary parts and hardware, saving you the hassle of searching for specialized components to replace the oil pan on your WRX, STI, Legacy GT or Forester XT.

INCREASED OIL VOLUME - The IAG EJ Street Series Oil Pan Package is designed for Subaru WRX, STI, LGT, and FXT models. It features a unique CNC-machined design capable of handling a wide range of street and track applications. The IAG EJ Street Series Oil Pan is made of durable cast aluminum and is designed for compatibility with a variety of popular headers, while increasing oil capacity by up to 30% more than the OEM version.

REDUCED OIL TEMP & BOTTOM FACING DRAIN PLUG - The design incorporates the use of cooling fins to help dissipate heat from the oil as air flows over them. It also includes a bottom-facing drain plug for convenient service access and to ensure complete removal of any remaining waste oil during maintenance changes. The EJ Street Series Oil Pan has a 1/8th inch NPT port which is compatible with several popular oil temperature sensors. If you choose not to use the sensor port, this oil pan package includes a 1/8th inch plug to securely seal it.

STAINLESS STEEL OIL BAFFLE - IAG Performance's EJ Street Series Oil Pan Package includes an internally integrated stainless steel oil baffle. This baffle is designed to prevent oil movement within the pan, which can lead to cavitation or even oil starvation. The baffle is removable to allow for future upgrades and easy cleaning. Unlike welded baffles, the IAG Performance EJ Street Series Oil Pan Baffle won't crack due to vibration.

THE IAG WINDAGE TRAY - The IAG Windage Tray is designed to guide oil from the upper crankcase into the lower crankcase and oil pan area. It is constructed of stainless steel and features precisely formed louvers that channel oil downward. This prevents oil that is draining from the cylinder heads in the lower crankcase area from splashing up towards the crankshaft and connecting rods.

THE IAG V2 OIL PICKUP - The IAG Oil Pickup is designed to replace the OEM EJ25 oil pickup which is prone to failure. It's widely known that the OEM oil pickups often develop cracks and fail, leading to engine damage due to insufficient oil pressure. To prevent the cracking problems often seen in OEM oil pickup tubes, the IAG pickup is constructed from heavy-gauge steel tubing. This tubing is TIG welded and has twice the thickness of the original, preventing cracks and potential engine damage. It also has a 3/8" stainless steel flange which has been precisely machined to fit with the block and sealed with a Viton O-ring.

FITMENT - Fits Subaru 02-14 WRX, 04-21 STI, 05-09 Legacy GT, 04-13 Forester XT

INSTALL NOTES - IAG oil pickup spacer is included and required when using the IAG oil pickup. OEM EJ25 dipstick (Part# 11140AA150) is required when using an IAG Oil Pan on the 02-05 WRX EJ20 engine.

Read more Read less

IAG I-Line 5pc Amber Grille Light Kit for Ford Bronco 2021+ High End Grille Only (Badlands, Wildtrak, First Edition)

Car Grilles

Buy on Amazon Find on eBay

STYLE AND SAFETY - The IAG I-Line five piece Amber LED Grille Lights add a useful touch of style to the grille of your Badlands, Wildtrak, or First Edition Bronco and give it that “Raptor” look. The amber LED lights shine brightly in the front of the grill, increasing visibility and alerting other drivers of your position. Constructed of high quality ABS Plastic, the waterproof LEDs feature a super-bright 135 Lumens of light.

EASY INSTALLATION - The I-Line Grille Lights easily clip into the OEM grille for easy installation and removal. The Plug and Play wiring harness is designed to turn the lights on and off with your vehicle ignition. The harness features a built-in fuse to protect your vehicle wiring.

WATERPROOF AND DURABLE - Constructed of high quality ABS plastic, the I-Line 5PC Amber LED Grille Light Set is designed to withstand the elements. The LED housings are waterproof and the included harness is fully insulated to prevent any damage.

INCLUDES - 5x Amber LED Lights, 1x Plug and Play Harness

FITMENT - Ford Bronco 2021+ High End Grille Only (Badlands, Wildtrak, First Edition)

Read more Read less

IAG Glove Box LED Light for Ford Bronco 2021+ & Bronco Raptor 2022+ (Not Sport)

Automotive Glove Box Light Bulbs

Buy on Amazon Find on eBay

GLOVE BOX LIGHT FOR YOUR BRONCO - 2021+ Broncos do not come equipped with a glove box light, making it difficult to find what you need in the dark. The IAG Off-Road Glove Box Light offers a quick and easy solution, featuring a plug-and-play harness that connects directly to your Bronco's factory wiring to deliver bright, dependable illumination every time you open the glove box.

SMART DESIGN, TOUGH CONSTRUCTION - The IAG Off-Road Glove Box Light features an intelligent, user-friendly design that activates the light when you open the glove box and includes a built-in timer that automatically shuts it off to prevent battery drain if left open. The light is constructed from durable ABS plastic and features a protective outer shell that adds an extra layer of protection to the lens. Just like your Bronco, it's built to perform—and built to last. Also - it is patent pending!

SUPERIOR LED TECHNOLOGY - The IAG Off-Road Glove Box Light uses ultra-bright LEDs that provide concentrated light to fully illuminate your glove box. Unlike traditional halogen bulbs, these LEDs aren't just brighter—they're far more efficient, lasting up to 40 times longer for dependable performance you can count on.

PLUG & PLAY INSTALLATION - The IAG Off-Road Glove Box Light is designed for a quick, hassle-free installation with a plug-and-play harness—no wire cutting, no drilling required. It securely clamps to the back wall of the glove box and includes everything needed to complete the install in about 15 minutes or less using basic hand tools.

FITS - Fits Ford Bronco 2021+ and Bronco Raptor 2022+ (Not Sport)

Read more Read less

IAG EZ-Lift & EZ-Pull Combo Kit for Ford Bronco 2021-24 4 Door Soft Top (Black Handles)

Buy on Amazon Find on eBay

IAG's EZ-Lift & EZ-Pull Combo Kit makes it easy to open and close the rear soft top hatch on your 2021+ Bronco four door without the hassle of a prop rod or having to use both hands. While our patented EZ-Lift Soft Top Assist System has already simplified opening and closing your soft top, we've gone even further to improve the functionality of the OEM Bronco soft top by adding our convenient EZ-Pull System. Eliminating the need for a prop rod & any concerns about the hatch closing unexpectedly.

THE EZ-LIFT - IAG's EZ-Lift System incorporates the use of two gas struts that provide an extra boost to make lifting and lowering your soft top a lot easier. With our system, you can single-handedly open and close the top from the side of the vehicle without having to get help or climb into the back of your Bronco. Our EZ-Lift customers love this upgrade, and agree that it is a must-have for your 2021+ Four Door Bronco soft top.

EZ-PULL AND EZ-LIFT - A PERFECT PAIR - Without the IAG EZ-Lift & EZ-Pull Combo Kit, opening your soft top's rear hatch took both hands to engage the release mechanisms. Holding the top open was just as difficult with the clumsy prop rod, and there were no handles to pull it shut. Thanks to our improvements to the factory soft top design, the top can now be opened effortlessly via a single-point mechanism, stays open on its own, and includes handles for convenient closure.

EASY TO INSTALL - The EZ-Lift Soft Top Assist system bolts directly to pre-existing mounting points on your Bronco's OEM soft top and interior cargo area, while the EZ-Pull System bolts directly into pre-existing mounting points on the soft top rear hatch. The EZ-Lift System features full written and video instructions and includes all the necessary hardware required for installation. Both systems can be installed in a little over an hour using basic hand tools in your own garage.

COLOR OPTIONS - The EZ-Lift & EZ-Pull Combo Kit comes with your choice of orange or black IAG Paracord Grab Handles. Made of high quality, thick, non-slip nylon webbing material, these grab handles are rated to 350 pounds of pull weight. With their durable construction and long-lasting functionality, they provide a reliable grip to pull your soft top hatch closed, while adding a touch of style & color to your Bronco's cargo area. The EZ-Pull release handle color matches your paracord selection.

FITMENT - Fits Ford Bronco 2021 2022 2023 2024 with OEM soft top (Not Sport)

Read more Read less

IAG Performance

IAG Performance Best Sellers

IAG Performance Multi-Directional Hose Clamp Pliers (for fuel lines, radiator hoses, hold clamps)

IAG EZ-Step for Jeep Wrangler 2018+ 4 Door & Gladiator 2020+ w/OEM rockrails (Black Logo Plate, 2 Pair)

IAG Trail Shield Adjustable Mud Flaps for Ford Bronco 2021+ 2/4 Door (Not Raptor or Sport), Front & Rear Set

IAG V2 EZ-Lift Soft Top Assist Strut System for Ford Bronco 2023+ 4 Door w/OEM soft top, Made in USA

IAG Off-Road Intake Snorkel for Ford Bronco 2021+ 2.3L & 2.7L Hard Top (Not Sport or Raptor) - Requires permanent modification to fender

IAG 4PC Interior LED Dome Light Kit V2 w/Harness for Ford Bronco 2021+ 4 Door Hardtop (includes mounting brackets)

IAG I-Line Hood Pad Isolator Reduces Engine Noise for Ford Bronco 2021+ 2/4 Door (Not Sport) - Flocked (Black)

IAG Performance Air/Oil Separator (AOS) for Subaru Impreza WRX 08-14, STi 08-21 (Black)

IAG V2 EZ-Step for Ford Bronco 2021+ w/rockrails (4 Door, Orange Logo Plate, 2 Pair) (Does not fit Raptor or Sport)

IAG Performance Oil Pickup & Upper Windage Tray for Subaru WRX 02-14, STi 04-21, Legacy GT 05-09, Forester XT 04-13

IAG I-Line Rock Rail Side Mini Mud Flap (2pc) for Ford Bronco 2021+ 2/4 Door (Requires OEM rockrails, NOT Compatible with Hoop Step Rock Rail Option or Raptor Style Rock Rail Option)

IAG Performance V2 Oil Pickup for Subaru WRX 02-14, STi 04-21, Legacy GT 05-09, Forester XT 04-13 and EJ engines

IAG Performance Oil Control Baffle, Windage Tray & V2 Oil Pickup Combo for Subaru WRX 2002-14, 04-21 STI, 05-09 Legacy GT, 04-13 FXT

IAG Performance Coilover Cover Sleeves (Set of 4) for Subaru coilovers

IAG EZ-Step for Jeep Wrangler 2018+ 2 Door w/OEM rockrails (Red Logo Plate, 1 Pair)

IAG Performance Timing Belt Kit w/Red Racing Belt, Timing Guide, Idlers & Tensioner for Subaru WRX 02-14, 04-21 STI, 05-12 Legacy GT, 04-13 Forester XT

IAG Performance EJ Street Series Oil Pan Package for Subaru WRX, STi, LGT, FXT (Silver Pan, Pickup, Street Baffle, Windage Tray)

IAG I-Line 5pc Amber Grille Light Kit for Ford Bronco 2021+ High End Grille Only (Badlands, Wildtrak, First Edition)

IAG Glove Box LED Light for Ford Bronco 2021+ & Bronco Raptor 2022+ (Not Sport)

IAG EZ-Lift & EZ-Pull Combo Kit for Ford Bronco 2021-24 4 Door Soft Top (Black Handles)

IAG Performance FAQs

IAG Performance

IAG Performance Best Sellers

IAG Performance Multi-Directional Hose Clamp Pliers (for fuel lines, radiator hoses, hold clamps)

IAG EZ-Step for Jeep Wrangler 2018+ 4 Door & Gladiator 2020+ w/OEM rockrails (Black Logo Plate, 2 Pair)

IAG Trail Shield Adjustable Mud Flaps for Ford Bronco 2021+ 2/4 Door (Not Raptor or Sport), Front & Rear Set

IAG V2 EZ-Lift Soft Top Assist Strut System for Ford Bronco 2023+ 4 Door w/OEM soft top, Made in USA

IAG Off-Road Intake Snorkel for Ford Bronco 2021+ 2.3L & 2.7L Hard Top (Not Sport or Raptor) - Requires permanent modification to fender

IAG 4PC Interior LED Dome Light Kit V2 w/Harness for Ford Bronco 2021+ 4 Door Hardtop (includes mounting brackets)

IAG I-Line Hood Pad Isolator Reduces Engine Noise for Ford Bronco 2021+ 2/4 Door (Not Sport) - Flocked (Black)

IAG Performance Air/Oil Separator (AOS) for Subaru Impreza WRX 08-14, STi 08-21 (Black)

IAG V2 EZ-Step for Ford Bronco 2021+ w/rockrails (4 Door, Orange Logo Plate, 2 Pair) (Does not fit Raptor or Sport)

IAG Performance Oil Pickup & Upper Windage Tray for Subaru WRX 02-14, STi 04-21, Legacy GT 05-09, Forester XT 04-13

IAG I-Line Rock Rail Side Mini Mud Flap (2pc) for Ford Bronco 2021+ 2/4 Door (Requires OEM rockrails, NOT Compatible with Hoop Step Rock Rail Option or Raptor Style Rock Rail Option)

IAG Performance V2 Oil Pickup for Subaru WRX 02-14, STi 04-21, Legacy GT 05-09, Forester XT 04-13 and EJ engines

IAG Performance Oil Control Baffle, Windage Tray & V2 Oil Pickup Combo for Subaru WRX 2002-14, 04-21 STI, 05-09 Legacy GT, 04-13 FXT

IAG Performance Coilover Cover Sleeves (Set of 4) for Subaru coilovers

IAG EZ-Step for Jeep Wrangler 2018+ 2 Door w/OEM rockrails (Red Logo Plate, 1 Pair)

IAG Performance Timing Belt Kit w/Red Racing Belt, Timing Guide, Idlers & Tensioner for Subaru WRX 02-14, 04-21 STI, 05-12 Legacy GT, 04-13 Forester XT

IAG Performance EJ Street Series Oil Pan Package for Subaru WRX, STi, LGT, FXT (Silver Pan, Pickup, Street Baffle, Windage Tray)

IAG I-Line 5pc Amber Grille Light Kit for Ford Bronco 2021+ High End Grille Only (Badlands, Wildtrak, First Edition)

IAG Glove Box LED Light for Ford Bronco 2021+ & Bronco Raptor 2022+ (Not Sport)

IAG EZ-Lift & EZ-Pull Combo Kit for Ford Bronco 2021-24 4 Door Soft Top (Black Handles)

IAG Performance FAQs

Similar Brands