Leak Saver feature image

Leak Saver

Review rating Review rating Review rating Review rating Review rating 4.3 Fact checked

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

When purchasing a product, price is the consumer's primary concern. At present, Leak Saver has 20 products for sale. Leak Saver products range in price from $9.95 to $67.95, and the average price of all the products is about $33.15.

We found that most of the Leak Saver products are manufactured by Leak Savers, HVAC Guys, and LS-05-DRY. The manufacturers provide Leak Saver with a steady supply of products, and they have a good cooperative relationship with each other.

You can confidently purchase Leak Saver products from the seller UDirect. The brand holds an average rating of 4.3, testifying to its excellent reputation.

Leak Saver Best Sellers

Last Updated: Jan 12, 2025

Leak Saver Direct Inject Small System with UV Dye - Refrigerant Leak Sealer - Detects Large Leaks - Ideal for Most Small Home Appliances and HVAC Systems up to 1 Ton - Proudly Made in The USA

THE EASIEST INJECTION METHOD: No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. Note: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter.
MORE THAN 3 MILLION UNITS SOLD SINCE 2015: The Leak Saver can permanently seal small refrigerant leaks where the complete refrigerant charge is not lost within 72 hours. It's similar to how blood in your body reacts to a cut. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks.
WITH ADDED UV DYE FOR FINDING LARGE LEAKS: Seal it or find it! If you have a leak that is simply too large for leak sealants to seal, the added UV Dye will light up brightly at the leak site when using a UV flashlight.
COMPATIBLE WITH ALL SYSTEMS AND REFRIGERANTS: : The Leak Saver UV is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, r1234yf, R404A, R290, R600a, and more.
YOUR SATISFACTION IS OUR PRIORITY: We stand behind the effectiveness 100%. If for any reason you are not satisfied with your product, please contact us and we will make it right.

Leak Saver Direct Inject Ultimate 3-in-1 | AC Refrigerant Leak Sealer | with UV Dye & Moisture Remover | for Most HVAC Systems Up to 5 Tons - Professional AC Leak Sealer - AC Stop Leak

3-IN-1 SEALANT + MOISTURE REMOVER + UV DYE – Our proven leak sealant now includes moisture remover and UV dye for the complete system treatment! Now, you can seal your leak, remove system moisture, or find large leaks with the UV Dye...all in one easy to install package!
STOP LEAKS PERMANENTLY - The Leak Saver can permanently seal refrigerant leaks where the complete refrigerant charge is not lost within 7 days. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks
WORKS WITH ALL SYSTEMS & REFRIGERANTS INCLUDING CARS - Our product is compatible with all systems, refrigerants (except ammonia), car refrigerants, and oils. It is great for central air conditioners, automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A , r1234yf, R404A, R290, R600a, and more
STRAIGHTFORWARD INSTALLATION - No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver HVAC sealant injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. NOTE: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below
SAFE FOR ALL TOOLS AND PARTS - Our HVAC leak sealer is safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system. Adapter required for mini splits (5/16" to 1/4") and automotive systems ( 134A to 1/4")
THE MOST TRUSTED - The numbers don't lie! With more than 4,000,000 units sold of our air conditioner leak sealer formula since 2015, we are the most trusted leak sealant among HVAC professionals. Proudly made in the USA. We stand 100% behind the quality of our products. If for any reason you are not satisfied with your order, reach out to us and we will make it right.

Leak Saver Direct Inject AC Leak Sealer Small System | AC Stop Leak for Most HVAC Systems Up to 1 Ton | Works with All Systems & AC Refrigerants | Made in The USA

STOP LEAKS PERMANENTLY - The Leak Saver can permanently seal small refrigerant leaks where the complete refrigerant charge is not lost within 7 days. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks
WORKS WITH ALL SYSTEMS INCLUDING CARS - Our product is compatible with all systems, refrigerants (except ammonia), car refrigerants, and oils. It is great for central air conditioners, automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A , r1234yf, R404A, R290, R600a, and more
STRAIGHTFORWARD INSTALLATION - No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver HVAC sealant injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. NOTE: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below
SAFE FOR ALL TOOLS AND PARTS - Our HVAC leak sealer is safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system. Adapter required for mini splits (5/16" to 1/4") and automotive systems ( 134A to 1/4")
THE MOST TRUSTED - The numbers don't lie! With more than 4,000,000 units sold of our air conditioner leak sealer formula since 2015, we are the most trusted leak sealant among HVAC professionals. Proudly made in the USA. We stand 100% behind the quality of our products. If for any reason you are not satisfied with your order, reach out to us and we will make it right

Leak Saver UV Dye (Dye Only, No Sealant) UV Refrigerant Leak Detection Dye for Automotive, Home, Commercial - Marine AC and Refrigeration up to 5 Tons

ULTRA BRIGHT UV DYE - The Leak Saver UV Dye Inject is the easiest way to inject UV leak detection dye into your air conditioning and refrigeration systems. No more messy syringes, hoses, or cans! Proudly MADE IN THE USA. The UV Dye illuminates brightly at the leak site when using a UV flashlight. Also visible to the naked eye. For best results, use a UV Flashlight in a shaded areas.
WORKS WITH ALL SYSTEMS - Our product is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, r1234yf, R404A, R290, R600a, and more.
STRAIGHTFORWARD INSTALLATION - No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. Compatible with all refrigerants including R22, 410A, 134A, 404A, 507A, 600A. Fully compatible with mineral, PAG, and ester oils.
WORKS IN AUTOMOTIVE SYSTEMS: For automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below.
DYE ONLY. There is no leak sealant in this product. For leak sealants, see our other products (Leak Saver Direct Inject and Leak Saver Direct Inject UV Refrigerant Leak Sealers). For use in automotive air conditioners, you will also need a 134A quick connect adapter and a manifold gauge with 1/4" hose connections. Safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system.

Leak Saver AC Leak Sealant + HVAC Injector Kit Bundle

STOP LEAKS PERMANENTLY - The Leak Saver can permanently seal small refrigerant leaks where the complete refrigerant charge is not lost within 7 days. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks
WORKS WITH ALL SYSTEMS INCLUDING CARS - Our product is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car refrigerant and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A , r1234yf, R404A, R290, R600a, and more
STRAIGHTFORWARD INSTALLATION - No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver HVAC sealant injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. NOTE: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below
SAFE FOR ALL TOOLS AND PARTS - Our HVAC leak sealer is safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system. Adapter required for mini splits (5/16" to 1/4") and automotive systems ( 134A to 1/4")
REPAIR BOTH CLOGS AND LEAKS: Now you can inject Leak Saver Direct Inject sealants (SEALANT SOLD SEPARATELY) and unclog air conditioner and refrigeration condensate drain lines with the same tool.

Leak Saver Leak Shot Automotive - Leak Sealant and Additive Injector - Made for Specialized Automotive Air-Conditioner System Repair - Non-Contaminating CO2 Cartridges - USA Made

SUPER FAST AUTOMOTIVE LEAK SEALANT INJECTOR: Easily inject Leak Saver Direct Inject leak sealants and additives (sold separately) into automotive air conditioning systems. Compatible with all automotive systems using the standard 134a quick coupler. This can also be used with residential and commercial air conditioners and refrigeration systems.
KIT INCLUDES: Leak Shot Injection Gun, 2x Leak Shot Refrigerant Grade CO2 Cartridges (multiple shots per cartridge), 134A to 1/4” Low Side Quick Coupler.
NON-CONTAMINATING CO2 CARTRIDGES: Our cartridges are specially formulated to not contaminate HVAC and refrigeration systems. Please only refill with our Leak Shot CO2 Refrigerant Grade refills.
MADE BY HVAC PROFESSIONALS: Our company was founded and run by EPA card holding HVAC techs. We are bringing you the same products we use in our own jobs. Made in the USA.
THE PRODUCT WE TRUST: Our company is owned and operated by HVAC technicians. These are the same products we use in our own jobs, and stand behind them 100%.

Leak Saver HVAC GUYS Foam Blaster Air Conditioner Cleaner 3-Pack - AC Coil Cleaner Foaming No Rinse Formula - Coil Cleaner for AC Unit Condenser and Evaporator Coil Cleaner - Neutral Citrus Scent

HVAC PROFESSIONAL FORMULA: Supercharge your coil cleaning with the HVAC Guys Foam Blaster penetrating evaporator and condenser coil air conditioner coil cleaner. Field tested and used by fellow HVAC professionals, the high pressure spray and delayed foaming action will liquify grime and deodorize dirty coils and drain pans. Designed for professional use.
POWERFUL ACTIVE EXPANDING FOAM ACTION: The Foam Blaster works by using a high pressure spray that penetrates deep into the coil and then actively expands into a dirt liquifying foam. Effectively clean dirty ac coils and restore their efficiency. Leaves a mild citrus scent.
FOR EVAPORATORS (NO-RINSE) AND CONDENSERS: The Foam Blaster is made for both evaporators (no rinsing required) and condensers (light rinsing with water required). When using on evaporators, the condensate water from the unit in operation will rinse off the dirt, debris, and product.
DESIGNED FOR ALL COOLING EQUIPMENT: The Foam Blaster is suitable for use on all HVAC units, refrigeration systems, automotive radiators, fan blades, metal filters, and more! Works great as a mini split cleaning kit, car ac cleaner and radiator cleaner, hvac coil cleaner, air conditioner coil cleaner, evaporator coil cleaner, ac condenser coil cleaner, refrigerator coil cleaner and more.
100% SATISFACTION GUARANTEE: We stand 100% behind the quality of our products. If for any reason you are not satisfied with your order, reach out to us directly and we will make it right.

Leak Saver Line Set & System AC Flush Solvent 1 Pound Can | Pressurized Solvent AC Flush Kit for Cleaning HVAC Line Set and Any Refrigerant-Based Systems

POWERFUL AC SYSTEM FLUSH SOLVENT FORMULA - Specifically formulated and effective in flushing out oils, acids, water, carbon residues, and other buildup from HVACR systems. It is excellent for refrigerant conversions, compressor burnouts, and component changes.
AC FLUSH KIT AND SOLVENT - The pressurized 140 PSI formula allows you to easily flush out line sets of central air conditioners, ductless mini splits, packaged units, refrigerators, commercial refrigeration systems, and any other refrigerant-based system. Please note that nitrogen is still required to purge the lines after flushing. Please refer to the instruction sheet for proper use. Refer to the sizing table for appropriate system sizing.
CLEANS SYSTEMS AFTER COMPRESSOR BURNOUTS - Compressor burnouts leave a considerable amount of carbon and acid buildup inside a system. If not properly flushed out before changing the compressor, this will burn out the new compressor. Flushing out the system with line set flush is a must after burnouts. This also pairs well with the Leak Saver Acid Scavenger to protect the system from any future acid buildup.
PERFECT FOR R22 to R-410 CONVERSIONS - Our HVAC flush solvent is great for removing oil and other impurities from inside refrigerant line sets while performing R22 to 410A refrigerant conversions and retrofits. It is suitable for removing system oils and cleaning out the line sets for all other types of HVACR refrigerant conversions as well.
PLEASE NOTE - Nitrogen flush kit is still required to purge the lines after flushing. Please refer to the instruction sheet for proper use. Refer to the sizing table for appropriate system sizing.
100% SATISFACTION WITH OUR HVAC TOOLS - Our company is owned and operated by EPA card holding HVAC technicians. These are the same tools we use on our own jobs and we stand behind them 100%. If you are not completely satisfied, please reach out to us directly and we will gladly make it right.

Leak Saver - Leak Shot Refrigerant Grade CO2 Refill Cartridges (8 Pack) - Refill for The Leak Shot HVAC Kit (Sold Separately) - for A/C & Refrigeration Systems - USA Made

REFILL YOUR LEAK SHOT HVAC: This 8 pack of high-pressure refrigerant grade CO2 was made for our Leak Shot HVAC (sold separately), a leak saver/line blaster 2-in-1!
SPECIALLY MADE CO2 CARTRIDGES: Won't contaminate your system as you unclog condensate drain lines and seal up leaks in A/C & Refrigeration systems.
PATCH PESKY LEAKS, TOO: The Leak Shot HVAC itself works in tandem with the Leak Saver Direct Inject (refrigerant leak sealant) which is sold separately for easy repair.
MADE BY HVAC PROFESSIONALS: And used by them, you can be confident that these cartridges are compatible with A/C and refrigeration systems up to 5 tons.
The Product We Trust: Our company is owned and operated by HVAC technicians. These are the same products we use in our own jobs, and stand behind them 100%.

Leak Saver Direct Inject Dry A/C Moisture Remover (No Leak Sealant, Moisture Remover Only) - For Systems Up to 5 Tons - Converts Moisture into Synthetic Oil - Created and Used by HVAC Pros - USA Made

GET YOUR A/C BACK UP AND RUNNING: Help prevent system failure, preserve efficiency and eliminate corrosion by converting system moisture into synthetic oil.
FOR MOST AIR-CONDITIONING SYSTEMS: Use on mini-split units, heat pumps, packaged units, central A/Cs, coolers, microchannel coils, and automotive applications.
THE FASTER, MORE ECONOMICAL CHOICE: By converting moisture into synthetic oil, it mixes with the already existing oil, for a simpler process than vacuum pumping.
THE PERFECT PREP FOR LEAK REPAIRS: Use alone to dry your air-conditioning system or pair with our Leak Saver Direct Inject (our refrigerant leak sealer) for leaks.
100% SATISFACTION GUARANTEE: If for any reason this didn't work out and you're unsatisfied, contact us for another at no cost (must be installed by certified HVAC techs).

Leak Saver K28 (ICOR Style) 7/16” Female to 1/4” Male Brass Can Tap Adapter for Use Upright Charging Self-Sealing Refrigerant Cans and K-28 Compatible Refrigerant Cans - Made in USA

Compatible With K28 (Icor Style) Cans: This K28 7/16” Female to 1/4” Male brass T-handle can tap valve is made for use with Leak Saver R290 and R600a upright charging self-sealing refrigerant cans. You can also use it with other 7/16” K-28 (ICOR) type cans. Note: This will not fit 1/2” ACME 134A self-sealing cans or piercing top cans.
Perfect for use with Leak Saver Upright Charging Cans: Our innovative upright charging can design lets you charge your system in liquid with the can standing upright. You can now conveniently stand the can upright on the refrigerant scale while weighing in the liquid charge. Self-Sealing Refrigerant Cans are sold separately.
You Can Count On Us: The numbers don't lie. We've sold more than 3 million units of the Leak Saver sealant formula since 2015, and our products are used in the field every day by HVAC professionals.
Proudly Made in the USA: Our high-quality products, tools, and equipment are made in the USA. You can depend on us for all your HVAC repair and maintenance needs.
The Product We Trust: Our company is owned and operated by HVAC technicians. These are the same products we use in our own jobs, and stand behind them 100%.

Leak Saver Leak Shot Pro Direct Inject Sealant Injector

INSTALL LEAK SAVER IN SECONDS - Use the Leak Shot Sealant Injector to install Leak Saver Direct Inject sealants (NOT INCLUDED) and additives in seconds!
UPGRADED DESIGN - Redesigned and Reinforced Metal Construction
KIT INCLUDES - Leak Shot Professional Grade Reinforced Injection Gun, 2x Leak Shot Refrigerant Grade CO2 Cartridges (multiple shots per cartridge)
NON-CONTAMINATING CO2 CARTRIDGES - Our cartridges are specially formulated to not contaminate HVAC and refrigeration systems. Please only refill with our Leak Shot CO2 Refrigerant Grade refills.
MADE BY HVAC PROFESSIONALS - Our company was founded and run by EPA card holding HVAC techs. We are bringing you the same products we use on our own jobs. Made in the USA.

Leak Saver Leak Shot Pro Automotive Direct Inject Sealant Injector for Automotive Systems

INSTALL LEAK SAVER IN SECONDS - Use the Leak Shot Sealant Injector to install Leak Saver Direct Inject sealants (NOT INCLUDED) and additives in seconds!
UPGRADED DESIGN - Redesigned and Reinforced Metal Construction
KIT INCLUDES - Leak Shot Professional Grade Reinforced Injection Gun, 2x Leak Shot Refrigerant Grade CO2 Cartridges (multiple shots per cartridge), 1x 134a Adapter
NON-CONTAMINATING CO2 CARTRIDGES - Our cartridges are specially formulated to not contaminate HVAC and refrigeration systems. Please only refill with our Leak Shot CO2 Refrigerant Grade refills.
MADE BY HVAC PROFESSIONALS - Our company was founded and run by EPA card holding HVAC techs. We are bringing you the same products we use on our own jobs. Made in the USA.

Leak Saver R600a Refrigerant - Upright Charging Self Sealing Can - 6oz Can - R600a for HVAC for Use in a 6oz Self-Sealing Container (3 Pack) - K28 Can Tap Adapter NOT Included

NOW WITH UPRIGHT LIQUID CHARGING AND SELF SEALING TOPS: Our R600a cans now come with self sealing tops (ICOR K28 style) and can be stood upright while charging. Must be used with a 7/16" K-28 Self-Sealing Can Tap Adapter.
COMPATIBLE WITH R600A SYSTEMS: Made for use in refrigeration and air conditioning systems specifically designed for R600a. Not for use in systems not designed for R600a.
EPA APPROVED USAGE: Approved by the United States Environmental Protection Agency (EPA) for use as per EPA regulations 40 CFR Part 82.17. For use by qualified personnel only.
SUITABLE FOR SYSTEMS CALLING FOR R600a: Including domestic refrigerators, freezers, dehumidifiers, window AC units, ice machines, restaurant equipment, wine coolers, beer kegs, soda machines, and more.
NON-REFILLABLE CANS: R600a in 6 oz. non-refillable cans. R600a for HVAC use in a 6oz self-sealing container.
K28 Can Tap Adapter NOT Included

Leak Saver Complete R290 and R600A Charging Manifold Hose and Gauge Set with Included K28 (ICOR) Can Tap Valve and Piercing Can Tap - HVAC Tools Kit - Made in The USA

Complete Charging Kit Includes: R290 and R600A Gauge with Protective Boot, Piercing 1/2” ACME to 1/4” Can Tap Adapter (for use with piercing style cans), K28 (ICOR style) 7/16” to 1/4” Can Tap Adapter (for use with Leak Saver Upright Charging Sealing Cans), 12” (30cm) Detachable Hose, 36” (90cm) Detachable Hose, Shutoff Valve Adapter.
Compatible With All R290/R600A Cans and Tanks: This gauge set can be used with all styles of R290 and R600A refrigerant vessels. Use this with refrigerant cylinders, Leak Saver Upright Charging Self-Sealing cans, and Leak Saver Piercing cans (inverted charging).
R290 and R600A Specific Gauge: This set comes with a gauge specifically made with R290 and R600A pressures and temperatures. This allows for simplified and accurate readings when charging.
You Can Count On Us: The numbers don't lie. We've sold more than 3 million units of the Leak Saver sealant formula since 2015, and our products are used in the field every day by HVAC professionals.
The Product We Trust: Our company is owned and operated by HVAC technicians. These are the same products we use in our own jobs, and stand behind them 100%.

Leak Saver Direct Inject Acid Scavenger - Converts Acid to Synthetic Oil, for A/C Systems Up to 5 Tons - Made in The USA

The Easiest Injection Method: Patent-pending and made to be completely fuss-free, no pump downs, syringes, or pressure-sensitive cans needed again! Comes with 1/4" male and female connections. A 134A quick coupler is necessary for automotive systems. A 5/16" to 1/4" adapter may be necessary for 410A mini-splits.
Eliminate and Protect From Acid: The ultimate damager, help protect your air conditioner and refrigeration systems up to 5 tons (60,000 BTU) from acid degradation. By turning acid into lubrication, no extra materials are left behind, and it works with POE, mineral, PVE, and alkylbenzene oils.
Made by Hvac Professionals: Especially after replacing compressors, an expert solution is needed for an acid neutralizer you can trust, and this one is made in the USA.
Next Step, Pesky Leak Repairs: This acid remover is powerful on its own, but for leaks, we recommend pairing with our Leak Saver Direct Inject (refrigerant leak sealer).
The Product We Trust: Our company is owned and operated by HVAC technicians. These are the same products we use in our own jobs, and stand behind them 100%.

Leak Saver 134A to 1/4" Lowside Quick Connect Automotive Adapter

Converts 134A automotive connections to 1/4". This type of connection is found on automotive air conditioners that use 134a refrigerant.
Perfect for use with the Leak Saver and Leak Shot product lines.

Leak Saver 1234YF to 1/4" Lowside Quick Connect Automotive Adapter

Converts 1234yf automotive connections to 1/4". This type of connection is found on newer automotive air conditioners that use 1234yf refrigerant
Perfect for use with the Leak Saver and Leak Shot product lines

Leak Saver 5/16" to 1/4" 410A Ductless Mini Split Adapter

Converts 5/16" SAE style connections to 1/4". This type of connection is commonly found on ductless mini-splits and newer 410A air conditioners
Includes a built in valve core depressor and schrader valve core
Perfect for use with the Leak Saver and Leak Shot product lines

Direct Inject UV AC Leak Sealer + Leak Shot Injector Bundle

WITH ADDED UV DYE FOR FINDING LARGE LEAKS: Seal it or find it! If you have a leak that is simply too large for leak sealants to seal, the added UV Dye will light up brightly at the leak site when using a UV flashlight.
THE EASIEST INJECTION METHOD: No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. Note: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter.
COMPATIBLE WITH ALL SYSTEMS AND REFRIGERANTS: : The Leak Saver UV is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, r1234yf, R404A, R290, R600a, and more.
REPAIR BOTH CLOGS AND LEAKS: Now you can inject Leak Saver Direct Inject sealants (SEALANT SOLD SEPARATELY) and unclog air conditioner and refrigeration condensate drain lines with the same tool.
NON-CONTAMINATING CO2 CARTRIDGES: Our cartridges are specially formulated to not contaminate HVAC and refrigeration systems. Please only refill with our Leak Shot CO2 Refrigerant Grade refills.

Leak Saver FAQs

Yes, Leak Saver is a legitmate brand on Amazon. After conducting a comprehensive analysis of 7,478 customer reviews for Leak Saver products on Amazon, we have determined its average rating. Offering great value and satisfying quality, Leak Saver has achieved a respectable rating of 4.3 from many customers, showing that its products meet customer expectations. While there may have been minor issues reported occasionally, overall, it is safe to make purchases from Leak Saver on Amazon.

Amazon has strict policies and safety measures in place that ensure only legitimate sellers and products are allowed on their platform. It also provides a secure payment gateway and offers buyer protection, ensuring your transaction is safe. In the unlikely event that there's an issue with your purchase, Amazon's customer service and return policies are designed to protect your interests.

If you're interested in Leak Saver and want to find more Leak Saver products, you can follow the steps below:

  1. Go back to FindThisBest's homepage.
  2. Type Leak Saver in the search box and hit Enter to see the search results.
  3. Find and click the correct Leak Saver to go to the new page.
  4. Select the products you want in the Leak Saver buying guide, and take a glance at the prices and features of the products.
  5. View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Leak Saver products.

We analyze millions of Leak Saver products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 20 Leak Saver products for sale, 20 of which were analyzed in detail and recommended to customers.

  1. Go to the Leak Saver page.
  2. Select the product you want in the Leak Saver buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product Leak Saver Direct Inject Small System with UV Dye..., you can view it on Amazon page.
  3. Place your order on Amazon.

Most of the Leak Saver products are produced by Leak Savers, HVAC Guys, and LS-05-DRY. The manufacturers provide Leak Saver with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the Leak Saver products, helping you make more informed buying decisions. We recommend best choices of the products from the Leak Saver brand, helping you make better shopping choices with less time and energy.