Best Wheel Spacers of 2025

"I found the spacers easy to install and the quality is impressive. They came with Loctite and fit perfectly behind my stock TRD Pro wheels, giving me the exact poke I wanted. So far, I've driven 5,000 miles with no issues at all!"

"Initially, I was optimistic despite mixed reviews. However, after installing the spacers, my truck developed a vibration issue that worsened. I removed the spacers, and while the vibration improved, it never completely disappeared. It seems tolerance stacking might be the culprit, leading to some premature wear on the wheel bearings. Moving forward, I’d suggest just getting new rims for a wider stance instead."

"After installing these spacers on my Tacoma, I had to adjust from 1.5” to 1.25” to avoid mud flap rubbing. The quality is evident as they are machined from a solid piece of aluminum. I measured them with a micrometer, and they were all within .005” of an inch, which is quite acceptable. KSP offers great products at a reasonable price!"

"I installed the KSP 1.5” wheel spacers on my 2024 Silverado 1500 Trail Boss LT with 275/60R20 factory wheels. The hub-centric size fit snugly on the wheel hub and inside the rim, which is great. The studs and lugs are made of high-quality steel. I torqued them to spec without any problems. They did come with a small tube of red thread locker, which was a nice touch. However, I did notice a slight rub at full lock on the rear wheel well inner mudflap, but it was minimal and required no trimming."

"I was initially hesitant to purchase these because of the price compared to other options, but they have held up well. The threads are clean with no abrasive spots, which I really appreciate. I do wish the threads were galvanized instead of stainless, but overall, I'm satisfied."

"I received the spacers today and installed them right away. My truck looks aggressive now, and I'm a happy customer. The fit was perfect, and there have been no vibrations. I just need to ensure they're properly torqued over time."

"I was initially worried about them falling off, but they haven't, and they make my car look ten times better. Installation was a breeze, and the build quality is impressive."

"After torquing them down, I used these on my riding mower, and it really turns nicely, saving the grass on turns and performing better on hills."

"I fitted these adapters on my Kubota BX23S. I only needed a 3-inch adapter, but I got a set of 4 for more options. Stability improved significantly with a full bucket of gravel, which felt safer than without them."

"Since I put these on, I've experienced the worst death wobble imaginable. I definitely wouldn't recommend these."

“I installed these 6x5.5 hubcentric wheel spacers on my Z41 Suburban over a year ago, and they’ve been fantastic! They really improved my truck’s stance and eliminated that stock, sucked-in look. I’ve put them through all kinds of use—off-roading, mudding, and towing—and they’ve held up perfectly with zero issues. I used thread locker during installation and check the torque regularly, and they’ve stayed secure without fail. If you want a reliable way to enhance your vehicle’s stance and performance, I highly recommend these spacers!”

“I received these spacers without a logo, but it’s not a big deal. They fit perfectly and I had them installed in about an hour. If you're looking to achieve a wider stance without spending thousands on new wheels and tires, these are perfect. After installation, I noticed they kicked the tires out by two inches, matching my pocket fender flares perfectly. So far, I’ve had no issues with installation or driving.”

“These spacers work great and seem to be high quality. I had them installed by a shop and they were properly torqued. However, I did notice a crack in one spacer upon closer inspection, but I’m not sure if it happened during installation or was caused by my truck hitting the ground. Overall, they’ve held up well.”

"I got these to test a strut lift spacer. They’re a bit off, but the material is good enough that I might still machine them to fit my Prius struts. Just make sure to check your specs for a safe fit."

"I find these wheel spacers to be quite heavy-duty and they fit my 4Runner perfectly. The quality is impressive, and installation was straightforward."

"These spacers are a fantastic upgrade for my Tacoma. The 1.5-inch width gives my truck a more aggressive stance, and the build quality is top-notch. I appreciate the smooth ride with no vibrations after installation. Overall, they’re a cost-effective enhancement for both appearance and performance!"

“I absolutely love these spacers! Everywhere I go, people compliment my tires on my Ford Aerostar Van. I always tell them it’s the spacers that make the difference! They set my chrome wheels and tires at just the right look. Perfect fit with no problems; I've driven over 2,000 miles on both pavement and muddy country roads.”

“These spacers made my Ranger look absolutely sick nasty! I’ve had them installed for a few months and no issues at all! Just remember to use lock tight red and give them a few extra ugga duggas when you install.”

“I was quite surprised by the quality of these spacers! I installed them the same day, and they run very smooth. Nothing feels off or out of place; they are just perfect!”

"The fit was great; just remember to double tie the lug nut after running a few miles to ensure it's safe for travel."

"I found these spacers to be of good quality aluminum and studs; I would definitely buy again."

"These spacers worked perfectly on my 2004 Dodge Ram 1500; I couldn't be happier with the fit!"

"I was initially skeptical about the low price, but after purchasing these spacers, I couldn't be happier. I highly recommend having a professional install them to ensure they're properly torqued. I bought 20mm for the front tires and 25mm for the back, making my wheels flush with the side panels. After about 6 months, they’ve held up very well!"

"Had I discovered these 12 years ago when I bought my 2011 Infiniti G37 Convertible Sport, I would have installed them then! I only put the 25mm spacers on the rear, and they were easy to install with no clearance issues at all. I’m absolutely happy with the results!"

"My order arrived in just 5 days, and I’m thrilled with the quality and how they’ve changed the look and handling of my Infinity G35 coupe!"

"The product is reasonably priced and fit my vehicle as advertised. I would definitely purchase it again if needed."

"I bought these spacers for my foxbody after doing a 5 lug swap from a 1994 Ford Mustang. They don't center the axle perfectly, so I used electrical tape to center them. Overall, it works fine for the price—sometimes you just have to make things work."

"Unfortunately, my mechanic advised against installing these because they don't rest on the center of the wheel hub. All the weight is supported only by the lug bolts, so I have to return them."

"I have a 2022 F150 STX 2WD with 33-inch tires on stock 20-inch rims. I wasn't thrilled with how the tires looked tucked under the body. After some hesitation, I bought these spacers, and they fit perfectly! Installation was a breeze, and I absolutely love the Ford blue color. They widened the stance by 3 inches, giving my truck the look I wanted. These spacers are professionally machine-cut, so I feel great about the quality. Love these spacers!"

"I installed these spacers on my 2018 F-150 XLT. They transformed the look of my truck by making the tires pop out just enough without looking overdone. They were easy to install and seem very well-built. Just a heads up, if you're looking for a major offset, consider new rims instead of spacers. Overall, a high-quality product that I'm very happy with!"

"I put these on my 2020 F150 and am very impressed. There’s zero vibration or shaking, and the construction feels solid with high-grade bolts. After driving about 7000 km, I rechecked the torque during a tire rotation, and everything was still tight. I’ve used my truck for heavy work and taken it off-road, and these spacers have held up beautifully."