Best Valve Cover Gasket Sets of 2025

"I've installed these gaskets, and they are great quality at a reasonable price."

"The gaskets fit my 2003 GMC 6.0 perfectly. Just be careful with the grommets, as they can tear easily."

"I found the gaskets to be very functional, but they cannot be reused if removed."

"I found these gaskets to be good quality and they fit nicely. The bolt grommets slid on easily, which saved me time and effort. Since I installed these last week, there have been no leaks."

"When I replaced the spark tube seals, I was very careful removing the old ones. I used a pry bar, and they came out without much hassle. I made sure to lubricate the seals with fresh engine oil before installing them, which helped avoid leaks. My valve cover looked fine outside but needed replacement inside."

"I needed a solution for oil leaking on my ignition coils. After replacing with these gaskets, I’m happy to report that there are no more leaks. Highly recommend!"

"I did the cams and hydraulic lash eliminators on my Jeep 3.6. This brand's quality is excellent with a reliable fit and function."

"About three months ago, I replaced the valve cover gaskets, and I'm thrilled because there are still no leaks. I love Fel-Pro products!"

"The set has been fantastic on my 2012 Chrysler 300. I'm now 7,000 miles in with no leaks. I've bought this brand for other vehicles and would happily purchase it again if needed."

"This gasket set fit perfectly for my 06 Accord EX 2.4 L. Installation was a breeze, and I love the blue gasket!"

"I installed it last night in class. We used a die for the coil seals and RTV'd the corners. One of the top seals was still leaking, so I had to use an old one. Now, I'm just watching and waiting. No leaks right now!"

"Over the years, I've tried several engine gasket brands. Fel-Pro gaskets are superior—the fit and finish are excellent. Given a choice, I will use nothing else."

"I had no issues installing the gaskets on my engine after replacing a couple of rocker arms and lifters. They fit the valve cover and intakes perfectly."

"For my 2018 Jeep Grand Cherokee Laredo 3.6 Pentastar, I was only able to use the spark plug tube o-rings and the main valve cover seal. Despite some minor variations, it sealed up great with no further leaks."

"I bought this gasket kit for my 2012 Jeep Wrangler Sport 3.6L. Once I figured out how the valve cover gasket seats, it was straightforward. This kit included everything needed for both valve covers."

"I found this kit had good reviews and was a great value for fixing my Subaru's valve covers. After struggling with the old seal, I was pleased to find these gaskets fit perfectly and stopped the oil leak. I definitely recommend this for anyone with a 4-cylinder Outback."

"The fit of the gaskets is fantastic, and I would buy again if needed. They seem to be high quality and are performing well."

"This gasket set worked perfectly for my 2000 Toyota Tundra 4.7l. It included everything I needed, and the gaskets fit without any leaks. The toughest part was removing the old spark plug seals, but once I figured that out, it was smooth sailing."

"I bought this valve cover for my 2013 Nissan Altima. It had an issue with not sealing the front part of the cylinder head due to a design difference. After installation, I noticed oil leakage."

"I tried another vendor's valve cover that was supposed to fit, but it also didn't. I ended up tracing my original cover on cardboard to compare, and there was no match."

"I found the gasket quality to be excellent and it's much cheaper than the $100 options at parts stores."

"The fit was exactly as promised; I appreciate the reliable service from this supplier!"

"After replacing gaskets on my Chevrolet Traverse, I had an oil leak. I decided to switch to Felpro gaskets, and now the leak is gone and it passed inspection."

"I bought these gaskets for my '01 Dakota R/T after realizing it was time for a change. The old Fel-Pro gaskets were leaking, but these new metal gaskets with rubber coating arrived in perfect condition. They fit great with all bolt holes aligning perfectly, and now my engine holds oil pressure just as it should, with no leaks. Just had to trim a few small loose rubber tags, but overall, a five-star product!"

"We purchased the Fel-Pro VS 50419 R Valve Cover Gasket Set for our 1999 Dodge Durango SLT 5.2L, and it works perfectly! The local auto shop replaced our old gaskets with these, and the form, fit, and function are spot on! I highly recommend this product and the seller, as it was a superior OEM part at an unbeatable price, saving us over $20.00!"

"These gaskets arrived on time and fit perfectly on my '01 Dodge Ram! I would definitely recommend them to anyone!"

“These gaskets fit well and seem to be doing the job of not leaking. I had some trouble with installation due to the sideways motor, but that’s not the product’s fault. I’m curious to see how well they seal and how long they last.”

“I needed this after the P0303 code appeared. The old gasket was brittle, and after I replaced it, the oil smell went away.”

“I received the correct size, which I believe is reliable quality, even though there's a chance you might get the wrong size from Amazon.”