Best Straight Router Bits of 2026

"I was impressed by the excellent quality of these Dremel router bits. They fit perfectly in my 1/8” collet and deliver very clean cuts, especially on pine. I'd definitely recommend them to anyone who enjoys working on detailed routing projects."

"These bits arrived just as described and the pop-up holder is great for keeping them organized. I've only started using them, but so far, they seem like a good value. Looking forward to seeing how well they hold their edges over time."

"While these tools didn't work for my specific application, that's on me, not the product. They're still good quality tools and I'll be able to use them for future projects."

"After years away from woodworking, I bought a Freud bit and was blown away. It cut a 3/4" dado in red oak with incredible smoothness and accuracy, even in a cordless trim router. The cut was spot-on, and the bit performed effortlessly. Freud bits are more expensive, but the value and precision are unbeatable. I’ll keep buying Freud and recommend them to anyone."

"I used this bit to rout grooves for T-tracks in my router base. The bit was extremely sharp and produced a perfect, snug fit for the standard T-track. My router even ran more quietly and smoothly with this Freud bit than with others I’ve tried. I’d definitely recommend it to anyone needing accurate slots."

"Freud bits have always impressed me, and this one is no different. They’re incredibly sharp and have proven to be durable with proper use. For the price, these bits outperform many higher-priced options for hobby and DIY woodworking. Freud is quickly becoming my go-to brand."

"I was impressed by the multi-pack value and how well these bits worked with my cordless rotary tool. They cut through my plastic case like butter, and after multiple uses, I noticed no signs of wear. The price beats anything at big box stores!"

"These bits are a perfect fit for my Dremel, and they cost much less than the original brand. They're excellent for cutting drywall, paneling, and other thin materials."

"I managed to create two 5-inch holes in particle board with one bit, and it still held up. The helix angle is great for hard material, but to avoid burning, I recommend drilling a starter hole first."

"I've been using this Whiteside undersized plywood dado set and I'm really impressed. The bits cut exceptionally clean dados with zero tear-out, and the sizes are spot-on for modern plywood. No more fiddling with test cuts or worrying about loose joints—these just work, right out of the box. The build quality is obvious, and the carbide tips are super sharp and balanced, with no chatter at all. If you do any kind of cabinetry or furniture making, this set is a huge upgrade from generic bits."

"For my red oak dresser project with inset panels, these bits were a lifesaver. They perfectly matched my 1/2" and 1/4" panels, so I didn’t have to waste time adjusting a dado stack. After setting up my fence and featherboards for safe operation, the stop dado cuts came out clean and consistent. Since switching to Whiteside a couple of years ago, I’ve noticed they offer premium quality at a price not much higher than midrange brands. Definitely worth it if you care about clean, safe cuts."

"These router bits are exactly what I needed for undersized plywood. Super sharp, extremely clean cuts, and a snug fit every time. Much easier than messing with dado blades and spacers, and I’m really happy with the quality. Whiteside always delivers reliable performance, and I’m very satisfied with this purchase."

"I was blown away by how sharp and durable this router bit is straight from the box. It made quick work out of some really tough wenge wood, gliding through like butter at the recommended 16,000 rpm. For the money, I don’t think you can find a better value—high performance at a great price."

"I’ve used this bit to hollow out log slices for napkin holders, and it fit perfectly in my Milwaukee router. Strong, clean cutting performance and it keeps a sharp edge. You get what you pay for, and this is well worth it."

"My experience with the 1-3/4” straight bit was mostly positive. It’s a beast for planing wood flat and level, very sharp, and removes a lot of material quickly. However, I did notice it left some slight lines on the wood surface, which were easy to sand out. Despite that, I still recommend it because Freud bits last a long time and perform well for the price."

"I discovered this set from a YouTube recommendation while working on cabinets, and it quickly became one of my favorites. The fit for plywood bottoms is exceptionally snug, and I love how they enable me to build cabinets in a more traditional and sturdy way. Now I wish I had picked them up even sooner!"

"After using these bits, I ended up buying more from the same brand—they're definitely the best 'yellow' router bits I've tried. I built a large bookcase using only dados and glue, and it's incredibly solid. The fit was tight, and even after the whole project, the bit was still sharp. I can't recommend these enough!"

"These were my first-ever router bits, and even with zero experience, I managed to make perfect dados for shop cabinets out of some low-grade plywood. The fit matched my plywood exactly. There was a little tear-out, but that was expected with the material I used. Overall, I'm very satisfied with the results!"

"I needed a compatible bit after picking up a Porter Cable dovetail jig at an auction, and this one worked out perfectly. The dovetail bit is high quality and made flawless dovetail tails. I’m really impressed with the results!"

"This dovetail bit is a powerhouse for joinery. It’s the ideal size and fit for my dovetail jig, and delivers excellent results every time."

"I’ve been using this bit as a replacement with my Porter Cable jig, and it’s held up incredibly well. After making 16 sets of drawers, there’s no sign of dulling. Definitely a solid performer!"

"I found these bits to be excellent quality and impressively sharp. Working on 2” Douglas fir for my pergola, they held up really well. For the price, I think they’re a great purchase and I’d recommend them."

"When I used this set to flatten a wood slab, the results were great. The bits performed just as I hoped."

"I appreciated that each bit was individually packaged, and they arrived extremely sharp, just as described. I’m happy with the purchase."

"I was amazed at the affordable price for such a reputable brand. At first, I doubted the authenticity, but these bits cut exceptionally well and hold up, even with tough hardwoods. They lasted longer than I expected!"

"I used this bit to flatten a red oak cookie with my router sled. The process was a bit slow but definitely effective—it got the job done!"

"This bit is extremely sharp and self-cleaning, making it ideal for door lock and knob installations with my trim router. I often work with Hemlock and Red Cedar gates, and I'm always looking for a sharp bit that delivers a clean, professional finish—this one truly surpassed my expectations!"

"I bought this bit for around $10 to make box joints in solid red oak. The cuts turned out clean and steady, and for the price, this bit has been an outstanding value."

"As a beginner in woodworking, I pushed this bit pretty hard—taking off 3/4 x 3/4" from a 2x4 in one pass with a large router. It powered through without issue, showing real strength. I probably won't push it that hard again, but it's definitely a tough bit."

"After building several bookcases, the bit stayed sharp and performed great throughout the projects."