Best Powersports Tail Light Assemblies of 2026

"I was looking for a simple upgrade for my horse trailer and these plug-and-play LED tail lights turned out to be just as good as more expensive options. Installation was a breeze, and the brightness and modern look really impressed me. I had a small issue with the gasket not fitting perfectly, but I believe that's due to my trailer's opening, not the lights themselves. All in all, I'm very satisfied with the quality and ease of use."

"While refurbishing my 6x12 cargo trailer, I swapped out the old lights with these and was amazed by the perfect fit and significantly improved brightness. I liked them so much that I got the clear version for backup lights too. Installation was straightforward, and the visibility is fantastic, with the added bonus of being affordable. A small note: the grommets for the red and white lights differ slightly, but overall, I'd definitely recommend and buy them again."

"I needed a new tail light for my bike and these LEDs proved to be much brighter and better looking than expected. The only minor drawback is that the fit wasn't completely snug on my specific mount, so I had to adjust it a bit. Despite that, I'm happy with the overall result and improved visibility."

"After putting this red LED tail light on my Harley Street Bob, I've noticed a dramatic improvement in brightness and clarity. Installation was a breeze, and the build feels durable even through rainy rides. It definitely gives my bike a sleeker, more modern look."

"I installed this on my 883R 2006 and it was super easy to set up. The new look is distinctive and stylish, making my bike stand out. Highly recommended for anyone seeking a change."

"This LED light is much brighter than the standard one, making it easier for others to see me day or night. Plug-and-play installation made it hassle-free."

"I put these lights on my dirt bike, and I'm honestly impressed by how bright they are. The installation was simple—just followed the instructions and used a hair dryer for the adhesive, and they stuck perfectly. The wiring quality is solid, and even though the last bit of the strip had no adhesive, a dab of super glue did the trick. For the price, these lights exceeded my expectations and work flawlessly with my LED flasher relay."

"After seeing another rider install this on their KLR650, I decided to try it myself. The thick silicone waterproofing gives me peace of mind for all-weather rides. The instructions were clear and packaging was above average. The tape is strong, and the light is noticeably brighter when braking, which makes me feel safer on the road. I'd definitely buy it again."

"I added these as extra brake lights for my motorcycle. They're plenty bright as running lights and add much-needed visibility, though the difference between running and brake mode is pretty subtle. Still, the overall quality and brightness are great for the price."

"I found the LED tail light really easy to install and the price was unbeatable compared to OEM options. The brightness is impressive, though you need to pay attention to the wire polarity during setup."

"This is a very bright tail light and I'm happy with the quality. It didn't include nuts and washers, but I picked those up easily. The price makes it a great value."

"The LED light works great and is super simple to set up. Looks good and the quality is excellent for the money."

"Installation was a breeze—took me just a few minutes—and these LEDs are seriously bright! They fit my Harley perfectly, with no hyper-flashing or any other issues. I’m very satisfied with the quality and price; definitely a great buy!"

"The brightness and build quality on these are impressive, and they slid right into my 2011 Ultra Limited’s turn signal bar. Just a heads-up: I did get hyperflash, but grabbing a $20 eliminator box fixed it instantly. Much better than messing with resistors!"

"I was excited to match my front and rear lights, but the rear LEDs didn’t fit my 2010 Harley CVO Ultra Classic. The contacts and posts are different than stock, so check your bulbs before ordering. If the seller helps me out, I’ll happily update my review, since the fronts look awesome!"

"I installed this as a tail light on my ATV and it’s been working bright and reliable for over a year. I only use the running light function, but I’m impressed enough to buy another one."

"Setting up the light on my 1991 Harley Softail was straightforward after figuring out the wiring. With some soldering and proper sealing, I got both running and brake light functions to work. It’s really not difficult and does the job well."

"I put this on my Grizzly 90 which didn’t have a rear light before. It was easy to retrofit, provides both running and stop light functions, and so far it’s working great. Hoping it stays watertight and lasts a long time."

"I've had this installed on my Yamaha Big Bear for quite some time, and it's still working perfectly and remains bright. Really happy with its long-lasting performance."

"The light itself is good quality and fits just right, but I did notice the wires are noticeably shorter compared to the original, so I had to make some adjustments."

"Installing this was a breeze, plus it came with a fresh bulb. However, the wire ends felt a bit flimsy, so I ended up splicing in the old connectors."

"I really appreciate the built-in flasher and bright brake lights. The power-on animation adds a nice modern touch, and I didn't need an extra flasher for the turn signals. This product is definitely bright and noticeable."

"I installed this on my dual sport motorcycle and it was a perfect replacement for the bulky stock lights. The fit is tight under the fender—looks like it came from the factory. Very happy with the brightness and overall look."

"The sequential turn signals and startup animation are a big plus. It took me a bit to figure out the wiring, but once installed, the light works beautifully and looks amazing on my bike."

"For me, the installation was truly hassle-free—just made sure the wires were in the right place and it was good to go. The license plate gets plenty of light from the LEDs and the overall look is sharp. There’s a small gap on my 2005 XL883L, but that doesn’t take away from the great performance and style."

"This taillight was a seamless replacement for the factory part on my bike. The fit is spot on, the seal keeps out water, and the three flashes when braking really help with visibility. All the wires plugged in easily, so it’s definitely one of my top upgrades."

"I love the modern upgrade this brought to my ride—the LEDs are bright, and the strobe brake effect is a cool safety feature. The license plate is lit up nicely too. For the price, I’m extremely happy with the look and function."

"Installing this light was super simple, and it works flawlessly. The brightness is great, I love the smoked lens, and every function—from brake to turn signals to license plate light—performs as expected. No problems at all; definitely a solid upgrade for my bike!"

"The clean, low-profile look really impresses me, and it was a breeze to set up. It’s lightweight and the light output is impressive. I wanted just a brake light at first, but after testing, I ended up appreciating the built-in turn signals too. I wired the integrated signals to my existing ones, and everything flashes normally—no resistors needed. I’ll keep an eye on the seal and plastic durability in the desert sun, but so far, I’m really happy."

"I had some trouble with the amber turn signals staying on, even after getting a replacement. The smoked lens looks great and the light is bright, but the wiring didn’t work perfectly for my bike. The seller helped with the warranty process, though it took several days."