Best Power Benchtop Planers of 2025

"This planner was exactly what I needed for my workshop. Lightweight and compact, it was perfect for my limited space. I was able to start planning in just 3 minutes after setting it up. The results were outstanding, with a completely smooth surface on the board. I was pleasantly surprised by the sturdy construction and the intuitive design for measuring material to cut. Overall, I am very impressed with this purchase!"

"After using a Delta planer that had a lot of issues, I switched to a Makita that lasted for 18 years. Now that I don't need a high-end tool, I decided to try the Wen planer for its price. After three months of hard use, I can say it's a great buy. The setup was straightforward, and I was able to fix a minor taper issue within 20 minutes. For the price, I have no complaints!"

"I found this planer to be great right out of the box! It's an excellent lunchbox planer at a fantastic price. I've run a fair amount of board foot through it, and the blades are still sharp. The double-sided blades allow me to flip them before replacing or sharpening. With a vacuum attached, it creates virtually no mess. It's straightforward to set up and use!"

"After borrowing a heavier planer, I decided to buy my own. I’ve always trusted Craftsman tools, and so far, I'm very satisfied. This unit is heavy enough to stay put during use but light enough to move easily. I’ve put about 1200 board foot through it, and it cuts as well as, if not better than, my friend's three-knife brand."

"I just set up my new Craftsman bench top planer. The setup was a breeze, and I tested it on various boards. This machine is awesome! It smooths wood beautifully and adjusts easily. My only concern is a bit of snipe at the end of the boards, but I learned that it can be fixed by ensuring the wood goes in straight and making smaller passes."

“I find this planer straightforward to use. After running several boards through, I haven’t faced any major issues, aside from some occasional snipe, which I'm learning to manage.”

“I was initially disappointed as the machine tripped my circuit breaker repeatedly. However, after some adjustments, it performed better, but I still have concerns about the dust chute clogging.”

“This machine performs exactly as I expected. I’ve used it for various types of wood, and even for wood with epoxy resin, the results have been perfect.”

"I've found this planer to be incredibly versatile, handling everything from rough lumber to furniture edges with flawless performance."

"This tool has been a game-changer for my woodworking projects; it accommodates a wide range of tasks effortlessly."

"I was pleasantly surprised by how well this planer works. It's smooth cutting made sanding faster and it definitely outshines other bigger, more expensive models I have used. For both home and professional woodworkers, it's worth every penny."

"As a first-time user, I ran about 10 BF through this planer and it performed beautifully right out of the box. The sharp knives provided a super smooth finish. After learning to feed the boards correctly, I noticed minimal snipe. This tool is going to significantly speed up my workbench project!"

"I've owned this planer for over 6 years and it still works perfectly. Regular maintenance, like changing blades and cleaning, has kept it in top shape. I believe it's a simple machine that delivers great results if you keep it clean and well-maintained."

"As a remodeling carpenter, I recently added this planer to my toolset. It's lighter than the Dewalt but works just as well, if not better. The dust shroud is effective, and the settings are easy to adjust."

"Being a first-time planer buyer, I chose the Wen 13” planer based on reviews and price. After ensuring the feed trays were level, I had no issues with snipe while running 2x4s and 2x6s through it. My project looked better with reduced sanding time."

"After extensive research, I found this planer to be impressive for preparing wood for my CNC machine. I expected to struggle with snipe, but I achieved minimal issues. I'm very satisfied with my purchase!"

"I found the assembly took about an hour, which seemed reasonable to me. Although the manual had inaccuracies, the drawings were quite helpful. I was able to use videos on Amazon to clarify my questions, so the manual wasn't necessary. I was impressed that all parts were straight and aligned perfectly without modifications. I ended up creating a functional lower shelf from scrap wood, which I painted to match the stand. Overall, it's a solid product for my table saw."

"Assembling the stand was straightforward, but I suggest laying the unit on its side during the shelf installation. All holes aligned perfectly for me without any drilling. I made sure to keep the nuts finger tight until all bolts were in place, which made alignment easy. The stand is sturdy, but I wish it was a little taller for better operating comfort."

"This unit is fantastic! Putting together the base took about an hour, though the instructions weren't very clear. I tested it out on a thick piece of maple, and while it struggled a bit, it still did the job. It’s quieter than my DeWalt planer. Overall, I'm happy with this unit, especially for the price."

“I am thoroughly impressed with the power benchtop planer I recently purchased. It delivers precise and consistent results with each pass, making my projects much more enjoyable.”

“This tool is incredibly strong; it has transformed my approach to woodworking. With its powerful motor and precision cutting capability, I achieve smooth, accurate results every time.”

“I find this tool to be a fantastic addition to my workshop. The high quality and smooth operation enable me to achieve professional-quality results. I confidently endorse this planer to any serious woodworker.”

"I spent almost two hours replacing all the cutting heads, but the Jet Planer performs like new afterward. It can handle teak stock with ease, though I had to switch to a 20 amp circuit for better performance. Overall, I’m pleased with its quality, but it’s best for smaller projects."

"In less than six months, I've faced issues with the planer. I've primarily used it for poplar, but now I can’t cut more than 1/64” at best. The last feed even tripped the breaker, which is quite disappointing."

"I love my Jet Planer! The helical cutter head efficiently processes everything I throw at it. I've run through hundreds of board feet of maple and walnut with zero issues. It truly delivers the quality expected from Jet."

"After watching a review and some YouTube videos, I was convinced to buy this planner. Out of the box, it feels heavy, which I prefer. I tested a few boards and experienced absolutely zero snipe! The finish was so smooth, like it had been sanded with 220 grit. The depth cut indicator is a great addition, and the dust collection worked quite well, especially with my harbor freight dust collector. If you're looking for a good planer with a helical head without breaking the bank, I highly recommend this one. Plus, it comes with 10 extra cutter heads. I'm really impressed!"

"I don't usually write reviews, but this planner is fantastic! I’ve only processed five pieces of cherry and one of hard maple. I forgot to lock the head on my last pass, but I still had zero snipe! It took some time to get the tray aligned and check the blade index, but it's worth it. I love this planner!"

"While this isn't a top-tier model, for the price, it’s absolutely outstanding. I've been crafting hardwood trim blanks for my remodeling projects, and I don't even need to sand the oak at all! The softwoods need a tiny bit of touch-up, but that’s expected. I can get the blanks down to .003” of each other, which feels incredible. I’m going to use it to its full potential!"