Best Oil Pan Gasket Sets of 2025

"I replaced my rear main seal, valve cover gaskets, and finally installed the FelPro Oil Pan gasket. It worked like a charm, and I have no more leaks! I've always trusted FelPro for their quality."

"This product feels a lot thicker and sturdier than the original. It was a direct fit for my 2010 Chevy Avalanche LTZ, and I'm very pleased with it."

"I used this when replacing the pickup tube O-ring, and there were no leaks! Just remember to tighten the oil pan bolts in the right order for best results."

“I've had no leaks after using these for 5,000 miles—definitely good quality.”

“I regularly order these because they look and feel just like OEM gaskets, and they have the important rivet holes drilled out.”

“The price is much better than local parts stores, plus the delivery was really quick.”

"I found the installation to be very straightforward. The gasket fit perfectly after I removed the old rivets."

"So far, I've driven 2500 miles without any issues, and everything seems to be working just fine."

"This gasket performs just as well as the more expensive options from Felpro. I had no leaks after the installation, which was a relief."

"I installed this with the high flow oil pump and rear main seal on my 1999 Jeep Cherokee 4.0. It's essential to do everything at once when removing the oil pan. I learned to avoid using the oil pan gasket tools until ensuring the oil pump and pickup don't obstruct the pan sealing. It was tricky to keep taking off the oil pan, but packing the pump with vaseline helped with priming. Upon starting my Jeep, the pressure shot up to 60 PSI, settling at 40 PSI at idle. Previously, it dropped to 20 PSI, so I'm thrilled with the performance."

"I got this gasket for my 4.0L Jeep, and I can confidently say it's the best oil pan gasket available. It’s well-made and fairly priced. While not a bargain, it'll last for years if installed correctly. I strongly recommend replacing the Rear Main Oil Seal while you have the oil pan off. It's crucial to be cautious with the front bolts since they thread into aluminum, which can easily strip. Overall, I was impressed with the Fel-Pro parts I used."

"I used this gasket when replacing the rear main seal on my 1987 Wrangler. It fit perfectly, and so far, I've had zero leaks. Installation was straightforward, and I couldn't be happier!"

"I found no leaks after installing this gasket on my '05 Honda Pilot, and it fits really well."

"I appreciate the innovative solution for sealing oil pans on Honda V6 engines. However, I was disappointed when the gasket bowed up 1/2 inch off the pan surface due to alignment issues, so I decided not to install it."

"After spending five hours trying to install this gasket, I realized it was a waste of time and money. The bolt openings were not accurately located, causing the gasket to bend."

"I found this kit to be great value, providing everything I needed except a bit of RTV for resealing. The little blue corner snaps made installation a breeze, holding the pan in place perfectly until I could secure it with bolts. So far, I haven't experienced any leaks, and I really appreciate the high-quality grade 5 black phosphate hardware that came with it."

"I decided to use a Fel-Pro blue gasket for my rebuild after my cork gasket started to weep. I was changing out several components of my engine, and this gasket has been performing excellently. I'm very satisfied with my choice and the results I’ve seen so far."

"This product has been a game changer for me. The installation studs made it significantly easier to position the gasket correctly, and I’ve had no issues with leaks after two months of use. I highly recommend it for anyone in need of a reliable oil pan gasket!"

"I found this gasket very easy to use, much better than silicone gaskets. Just ensure the surface is clean and flat. No more leaks!"

"My order arrived undamaged and fit perfectly. I installed it on my 2014 Jeep Grand Cherokee, torqued it to spec, and now there are no leaks. I would definitely recommend this."

"I reached out to Fel-pro for advice on installation and didn't receive any response. This lack of support makes me a bit concerned about the warranty if I install it incorrectly."

"I've found this to be the best gasket for my b20 CRV, especially when paired with a stud kit."

"After trying multiple gaskets, I can say these are better than OEM. The gasket feels solid, seals perfectly, and the installation was straightforward thanks to the included RTV and tools."

"This gasket arrived quickly and looked to be of excellent quality. I'm pleased to say it does its job well and appears reusable if I need to remove the pan later."

“This gasket worked great for me! It fit perfectly on my 2002 Nissan Altima SE 3.5, and I really appreciate how much easier it was compared to using RTV silicon. I didn't have to wait for anything to dry before filling with oil. After driving about 700 miles, I can confidently say there’s been no leaking at all.”

“I found this product to be much cheaper than what I saw at Advance Auto Parts. Same part number, same product! Fel-pro is a reputable OEM brand, and I trust that it holds up well.”

“I installed this gasket on my 2004 G35, and it worked perfectly! With the addition of gasket maker, it completely resolved my oil pan leak. Highly satisfied!”

"I found the perfect fit for my son's Dodge Journey 3.6 liter, and the quality is great."

"I'm really happy with this gasket. It fit great, and I appreciated not having to mess with RTV. I even called Felpro to get the torque specs for the pan bolts."

"This gasket was a fantastic replacement for my oil pan change due to a stripped drain bolt. It fit perfectly and there are absolutely no leaks. FEL-PRO is definitely a brand I trust."