Best License Plate Fasteners of 2025

"As a DIY enthusiast, I was impressed by the performance and durability of the Hoewina License Plate Screw Kit. The anti-theft design gives me peace of mind, ensuring my plates are securely attached. Installation was simple with everything included, and the rust-proof quality has held up well in harsh weather. I just wish there were a few spare screws in the kit."

"After losing some license plate screws, I ordered this kit, and it arrived quickly. Everything fit perfectly, and the quality is great. I was back on the road in no time, so I highly recommend this product!"

"I found this kit to be the best option for my two license plates. The different mounts included were a nice touch, and I would definitely recommend it to others."

"I had to install a license plate holder for my state, which requires both front and rear plates. My SUV's slanted front needed a special manufacturer's plate holder, and I was a bit anxious about drilling into my car. However, these anchors were a breeze to install and hold securely. I'm confident in this product; it’s an excellent value."

"While removing the rear license plate for a new registration sticker, I found that one of the original nuts was spinning and wouldn't let the bolt back out. After some effort, I managed to remove the bolt and noticed that the OEM nut had rounded out the hole. Thankfully, these screw retainers fit perfectly. I applied a bit of glue around the hole and added a plastic sleeve for extra security. Once installed, everything stayed put—great purchase!"

"I only have one piece of feedback: there’s no information on the required bit size for a fresh installation. It wasn't too difficult to measure, but it’s worth considering the material you're working with. If in doubt, start small and increase gradually for a tight fit. Other than that, I had no issues using these for a signal-mounted license plate bracket."

"I was initially very happy because they seemed to be of good quality. I installed four screws, two of each style, following the instructions. However, during a 30 km drive, the license plate fell off. They practically don't work."

"Amazon indicated that this product would fit my car, and it did! It was a bit challenging to insert, but with some muscle from my son, the bolt fit tightly into the trunk. Once I secured the license plate, it became rock solid. The screws expand the bolt, and it looks great once assembled."

"These are exactly what I needed to reattach my license plate. They were easy to use and arrived just as described."

"I recently upgraded to the License Plate Screws with Rustproof Finish, and they’ve truly enhanced my vehicle maintenance routine. This kit is practical and stylish for both front and rear plates. After washing my car one weekend, I replaced the old rusty screws, and the rustproof finish ensures they’ll look new for a long time. Installation was a breeze, fitting perfectly and securing my plates firmly without wobbling. I appreciate the peace of mind knowing they'll withstand the elements. If you're looking to refresh your license plate hardware with a reliable and attractive solution, this screw kit is an excellent choice."

"I recently purchased the Black License Plate Screw Kit, and it has surpassed my expectations! If you need a straightforward yet effective way to secure your license plate, look no further. The screws are exactly as advertised - black, adding a touch of sophistication that blends well with any vehicle color. They look clean and cohesive compared to the standard silver screws. I’m also impressed by their exceptional build quality, making them sturdy and durable. Installation was smooth, fitting perfectly into the existing holes. After driving through rough terrains and harsh weather, these screws have held up remarkably well without any signs of rust. The kit includes enough screws, so no need to buy extras. In summary, the Black License Plate Screw Kit is a reliable and aesthetically pleasing option for securing license plates, and I highly recommend it!"

"I found these screws to be exactly as advertised, with the screw head paint not chipping when using a flathead screwdriver. They are long enough to work well with my license plate frame, providing a nice, clean look over the old rusty screws. I used them on my 2025 Subaru Forester."

"I recently bought a used car, and when I was putting on the new license plate, I noticed that the old screws were corroded and the plastic washers had deteriorated. I was worried the plate might come off at high speeds, so I searched for replacements and found these. They were a bit expensive, but totally worth it to avoid a costly loss. Installation was super easy. I highly recommend them!"

"I have a 2016 Chevy Express cargo van with factory OEM speakers, which were mounted with rivets that I had to drill out. The holes left were ragged and I didn’t trust using sheet metal screws. I decided to try the license plate hardware instead. After drilling the holes and using nylon inserts, I found that the 1/4” diameter stainless steel screws fit perfectly. They hold the speakers firmly in place, and I’m very happy with how this turned out!"

"I purchased a 2016 Nissan Rogue and discovered that the left anchor for the state license plate was missing. The hole was round, and local car shops didn’t have those anchors. Thankfully, I found these on Amazon. They worked perfectly!"

"I found that these parts really help keep thieves from stealing my plates! They were simple to install and the cover caps give a sleek professional look. I appreciated the included wrench for easy removal. Highly recommended! 5 stars!"

"Everything I needed was included in the package. Now both plates are secure on my Silverado, which was a concern before."

"I was pleasantly surprised by the quality of this product given the cost. It worked perfectly on my vehicle and I have absolutely no complaints. The installation was much easier than I expected, and I feel much safer knowing my license plates are secure."

“I really like these little caps! I used two on the front and two on the back, and they were easy to install. The chrome look has been holding up well, and they give a nice finish to my license plate and frame.”

“Just a heads up, these chrome caps are perfectly compatible with my 2017 Audi Q7. One original cap fell off after three years due to a deteriorated retainer ring, but I replaced it with this product, and it matched exactly. The fix took me about three minutes.”

“I recently needed to cover the holes left by the eliminated front license plate in my vehicle. This product did the trick and looks great on my white and black cars!”

"I took the front end off my car, and everything I needed was included in the kit! Great value and good quality that fit as expected!"

"I appreciated the variety of parts; it made finding the correct screw size so much easier. Good quality product for a great price!"

"When I bought a frame for my license plate that didn't come with screws, I got these, and they worked perfectly fine!"

"I found these to be of decent quality and I love the almost endless customization opportunities for my ride. I can mix and match bolts and nuts in various combinations!"

"Installation was a breeze for me; no tools were needed! I think they offer good value for the money and are just what I was looking for."

"I've used them for bolting plates to motorcycles and hot rods. Even during rough offroading, I’ve never had one come loose or fly off. They don’t damage the finish on my vehicles!"

"I used it on my license plate, and everything worked perfectly. No problems with stripping out at all, so I'm giving it a thumbs up!"