Frequently Asked Questions (FAQs)
1. What are the different grades of sanding belts?
Sanding belts come in various grades or grits. Lower grits like 16, 24, 36, 40, 50, and 60 are used for material removal and rough shaping. Higher grits like 150, 180, 220, 240, 320, 400, 600, and 800 are employed for final finishing surfaces or transitioning to sanding discs in some cases.
2. Can I make my own sanding belts?
Yes, it is possible to make your own sanding belts. You will need sandpaper of your chosen grit, backing cloth, and adhesive. The process involves measuring and cutting the sandpaper, applying the backing cloth, clamping until the adhesive dries, and strengthening the edges of the joint. However, it is recommended to purchase ready-made sanding belts for better quality and efficiency.
3. Are belt sanders more powerful than orbital sanders?
Yes, belt sanders are generally more powerful than orbital sanders. Belt sanders use a continuous loop of sandpaper wrapped around two drums, allowing for aggressive material removal. On the other hand, orbital sanders move their abrasive pad in small circles, providing less power but greater control and less risk of damaging the wood.
4. Why do my sanding belts keep breaking?
Several factors can cause sanding belts to break. Using the wrong grit, either too fine or too coarse for the material being sanded, can lead to excessive heat, clogging, and belt failure. Other possible causes include improper tension, incorrect tracking, and worn-out belts. It is important to use the appropriate grit and ensure proper maintenance and usage to avoid belt breakage.
5. Is ceramic sanding belt better than aluminum oxide?
Ceramic sanding belts are generally considered better than aluminum oxide. Ceramic grains have a micro grain structure that allows smaller pieces to break away during grinding, resulting in longer-lasting belts. In contrast, aluminum oxide grains tend to dull as they wear, reducing the stock removal rate. Therefore, ceramic sanding belts are often preferred for their durability and performance.
6. What tape is used to join sanding belts?
Scotch Bi-Directional Filament Tape 8959 Transparent is commonly used to join sanding belts. This tape has a rubber-based adhesive that bonds well to dry rubber contact adhesive. It is recommended for fabricating or repairing sanding belts, providing a strong and durable bond.