Best Chemical Solvents of 2025

"I usually receive my orders within two days of purchase and the product is always of very high quality. I use it for cleaning my 3D prints."

"Purchasing bulk IPA at around $15 a gallon is a great deal. It works just like 99% IPA should, and the packaging was excellent with no leaks. I plan to buy again, as I can't find a better option for 3D print cleaning."

"This is my go-to source for Isopropyl Alcohol for cleaning my resin 3D prints. The supplier ships quickly, and the product is always consistent and effective."

“I use this product to clean the lens in my laser engraver. It needs to be free of any dirt, grease, or film that could distort the beam. This 99.9% alcohol meets that requirement perfectly, leaving no residue after evaporation. I also use it on my 3D printer build plate and for any surfaces needing precise cleanliness. It’s a great value compared to industrial supply companies. The only downside? It’s not for margaritas!”

“I appreciate that it was exactly what I ordered. However, I do find the smell quite strong and unpleasant. Despite that, it works great for its purpose. It handled cleaning my water pipe very well and didn’t leak during transport.”

“I've been buying this regularly since COVID started. It has countless uses for cleaning, and it’s much more affordable compared to similar products found in supermarkets.”

"This product works wonderfully for resin removal. A small amount goes a long way, making it a fantastic value!"

"I've made several purchases from this company. They resolved a delivery issue quickly, and the product quality is consistently excellent!"

"I received my order promptly, but it was in quarter gallon bottles rather than a gallon. Not really a problem for me, though."

"Throughout my adult life, I have always kept DMSO nearby. It rapidly stops pain from blunt force trauma, like hitting my fingers with a hammer. I apply it with a soaked cloth for about 5 minutes. Diluting it with water protects my skin from feeling dried out. I've also seen it work wonders for frostbite and have a couple of personal stories to share about its effectiveness, even in surprising scenarios."

"I did extensive research on DMSO before using it. After just one dose of 1/4 teaspoon for trigger finger, it was gone! I also noticed improvement with my pinched nerve. This product is 99% pure, comes in a glass jar, and is very effective. I mix it with juice to avoid the taste and will keep using it daily, especially since it doesn't harm surrounding tissues. I’m truly impressed!"

"After trying everything else for my sciatica and lumbar pain, I discovered that DMSO is the only relief I've found. Yes, it does have a slight odor, but it washes off easily. I experienced a temporary burning sensation, but it was manageable. I've learned to store it properly and keep my skin clean for the best results. This product has been life-changing for me!"

"I haven't tested for purity, so I can't confirm if it’s anhydrous. I successfully performed both base and acid catalyzed transesterification reactions with it. From what I noticed, about half is Polyvinyl Acetate. The Amazon Basics glue seems to be a cleaner product with less yellow hue. I'm using it as an ion exchange resin; the acetate form shows high impedance. I initially bought it based on misleading advice about glues."

"I use this as camp stove fuel. While it’s not the cheapest option, I appreciate that it’s available since denatured alcohol is banned in California, and this works well as a substitute."

"This product isn’t pure; it contains almost 10% water, and I noticed a lot of visible debris at the bottom of the bottles."

“I recently ran out of my old denatured gallon that I've had for years, so I was glad to find this product at a reasonable price. I used it to clean the gunk off some electrical connectors last week, and it worked very well and dried pretty fast.”

“Having used denatured alcohol for over 30 years, I rely on it for the final cleaning of paint on cars before applying decorative adhesive vinyl film. Since my local hardware stores have stopped carrying the 1-gallon size, Amazon is now my go-to source.”

“I've experimented with various fuels for my alcohol stoves, but this one performs the best for me. A tip I have is to add a few drops of food coloring in a clear container to easily monitor my fuel levels.”

"I ordered these while away with the jet at our other base. Another operator gave us a bottle for an engine change, so I 'paid him back' with two bottles. The nozzles are outstanding and at a great price. Super-fast shipping!"

"I use this to wash my items before they go into the curing station. Just remember to dry the alcohol off beforehand; otherwise, it can leave white residue."

"I bought this to create homemade case lube for reloading. It works great, and I will definitely purchase again when I need more."

"I find this product to be a cost-effective cleaning solution for my instruments. It's cheaper than 180 proof ethanol and works just as well."

"For my camp stove, I noticed that it produces a lot of soot and has a burning rubber smell when used at full strength. After testing, I discovered that a mix of 5 parts alcohol to 1 part water burns the best without soot, and it smells sweet. However, I wish the seller would have responded to my questions about the additives used for denaturing."

"While the product works as expected and is packaged securely, I was surprised to find that it does not come in a single gallon package, but rather in four quart bottles. I should have read the description more carefully!"

"I've discovered that this Denatured Alcohol is incredibly versatile and effective. It's ideal for cleaning, crafting, and even works as a fuel for small burners. The 200-proof purity means it evaporates quickly without leaving residue, making it perfect for various projects. Just be cautious of the strong fumes; I always use it in a well-ventilated area."

"When I had to remove fresh epoxy wood rot hardener from my hands after my gloves split, I used this product. I was able to get most of it off with just a little bit of rubbing. It worked great!"

"This is so much better than using Acetone or MEK for cleaning the waxy coating off ceramic tiles before applying paint. It's also cheaper than other options, which is a huge bonus. I give it Two Thumbs Up - Very Strongly Recommend Buy!!!"