Loading...

10 Best Automotive Body Paint

6582 Reviews Scanned Last Updated: Aug 10, 2020
BEST CHOICE POR 15 45404 Gloss Black Preventive Cover

POR 15 45404 Gloss Black Preventive

BEST VALUE TCP Thickness Viscosity Measuring Viscosimeter Cover

TCP Thickness Viscosity Measuring Viscosimeter

PREMIUM PICK Rust Bullet Automotive Inhibitor Metallic Cover

Rust Bullet Automotive Inhibitor Metallic

#1 POR 15 45404 Gloss Black Preventive

I have seen where this is peeled off in a thin layer, which could be bad preparation? I strongly suggest you buy some smaller cans. This will start to harden before you use 1 ram 4 cans, unless your paint has a considerable open area.

Once the jar is opened and re-sealed, it is usually opened throughout the process. If there is moisture in it, it is also easy to be contaminated. Of course, you can use a plastic bag to prevent it from being sealed, but why take the risk?

Two coats are usually needed, otherwise rust will reveal an ugly head. I can't tell you how important the surface preparation of any paint is, including POR-15. If you spray this, a respirator is necessary. You don't want this in your lungs.

If you apply it to your skin, if you do it right away, you can remove it with the usual paint cleaner. If you wait too long, it usually takes 7-10 days to take it off. Last year, I broke a can when I tried to open it.

I poured the rest into a small plastic can for future use. Later, when the container was opened, it hardened. Don't make the same mistake. The smaller cans are a little more, but if you end up throwing away half of the cans, you're in the lead.

  • Description:POR-15 45404 Rust Preventive Coating Semi-Gloss Black - 1 quart
  • Brand:POR-15
  • Model:45404
  • Item Weight:2.4 pounds
  • Product Dimensions:4.25 x 4.25 x 5 inches
  • Manufacturer Part Number:45404
  • OEM Part Number:Consumer Commodity, ORM-D
  • Folding:No
  • Cover Included:1 Can
  • Special Features:Non-Porous, Chemical Resistant, Permanent, Moisture Barrier

Features

  • There is no need to remove rust before painting.
  • The seal is permanently rusty.
  • Professional use
  • Lead-free
  • For metal substrates
  • See more on Amazon...

#2 Dupli Color EHVP10600 Black Performance Fabric

The coverage is large, the color is bright, and it is very flexible after smearing. Furniture cushions for outdoor daylight fading, choose to buy another set of cushions at a lower cost. See the picture.

  • Description:Dupli-Color HVP106 Flat Black High Performance Vinyl and Fabric Spray - 11 oz
  • Brand:Dupli-Color
  • Item Weight:15.4 ounces
  • Product Dimensions:2.61 x 2.61 x 7.95 inches
  • Manufacturer Part Number:HVP106
  • OEM Part Number:HVP106
  • Cover Included:Auto part, Automotive Accessories, Replacement and Performance parts

Features

  • professional
  • Flash point:-18 degrees Celsius
  • Flexible self-priming formula
  • Features: EZ contact conical nozzle
  • See more on Amazon...

#3 Dupli Color EPS100000 Grease Remover Spray

I used this as a preparation material for the latest car repair of my 2016 Mustang. Here's what I did: 1. Wash the car with Meguiar Gold soap. Two。 Dry with an oversized towel.3. Dry the car with mud. Circle the spots on the bumper / hood that are retouched with a paintbrush (simple window brush).

Two-color spray was sprayed where I was going to polish. Simply spray it quickly and wipe it with an ultra-fine fiber towel. In addition, I took a can of ultra-fine fiber lacquer (a small toothpick-shaped tool with a paint capacity of 1 stroke and 8 drops) and dipped one or two of them in some friction alcohol for the final cleaning of the paint chips.

If necessary, tap a little primer, then tap a little paint. All that's left is to set up your paint layer and polish it properly with a variety of sand blocks (I find that polishing with 2000 wet abrasive cloth is very effective for me, and it takes a minimum of scratches to clean the surrounding paint).

Scratches in polished light will make the retouched spots almost invisible unless your face is a few inches from the spot and someone points it out to you. This pre-spray is very effective for my use. It's much stronger than you think, and it's not safe to spray on freshly painted surfaces.

I learned this in a very difficult way. After I finished my initial primer, when I asked it to give it a try, when I went to wipe the surface with Towe, I sprayed this on it.

  • Description:Dupli-Color EPS100000 Prep Grease and Wax Remover Prep Spray - 11 oz
  • Brand:VHT
  • Model:PS100
  • Item Weight:15.2 ounces
  • Product Dimensions:2.61 x 2.61 x 8.2 inches
  • Manufacturer Part Number:PS100
  • OEM Part Number:PS100
  • Folding:No
  • Cover Included:Vehicle Accessories (AUTO_ACCESSORY),Appearance Chemicals, Paint Care, automotive-paint-sealers-and-protectants

Features

  • Dupli-Color simplifies your painting preparation requirements by providing a complete set of deoiling and dewaxing agents
  • Surface preparation is a key step in any high-quality painting project.
  • These special formulations help paint to form a lasting bond with exposed metal, surface, aluminum, plastic and fiberglass.
  • See more on Amazon...

#4 Genuine Toyota 00258 00070 21 White Touch Up

I called a trunk, threw some stones at me, and dug a hole in the plastic on the bumper. I asked someone to try to polish me, but didn't do a lot of work, and it looked pretty bad (photo).

Using 040 white primer, then 070 white pearls, then 00C transparent coating, plus some sandpaper and polishing, I was able to repair the damaged parts myself. Be sure to clean the area with dawn soap to remove any wax. Avoid touching potato chips with your fingers so that you don't introduce oil into the area.

If your plastic is chiseled and has raised edges like mine (looks like tooth marks), use sandpaper to remove any raised spots. Apply the primer leisurely and then apply it with a brush. The tip at the top of the bottle is useless.

Just put it down enough so that it is completely white and there is no metal or plastic displayed on the bottom or edge of the chip (figure 2). Once dry, add a pearl coat. I made a few of these coats and then used 1000 and 1500 grain sizes of wet sandpaper to deal with any raised spots and smooth them (Photo # 3).

Then I gave it the last light-colored coat and tapped it with 2000 grains of gravel. Once it's dry, I'll add a transparent coat. You can apply a transparent coating on the edge of the chip. Once completely dry, use 1000 grains of sand, then use 1500 grains of sand, and finally smooth them with 2000 grains of wet sandpaper.

Finally, use some mother-like polish to restore the luster (figure 4). Let the paint solidify in a few days and then wax it. I can hardly say that I have a pair of 1max 2-inch dents next to everyone.

  • Description:Genuine Toyota Parts - White Pearl (00258-00070-21)
  • Brand:Genuine Toyota
  • Model:00258-00070-21
  • Item Weight:0.8 ounces
  • Package Dimensions:4 x 1 x 0.2 inches
  • Manufacturer Part Number:00258-00070-21
  • Folding:No
  • Cover Included:Genuine Toyota Parts - White Pearl (00258-00070-21)

Features

  • Manufacturer
  • And vehicle specific
  • Vehicle specific
  • Toyota's quality is guaranteed.
  • OEM, rather than after-sales
  • See more on Amazon...

#5 Dupli Color EBSP30000 Clear Finish System

The paint is good and easy to use. I was depressed because I couldn't find a dark blue picture, so I uploaded a picture of myself. I will use it again and recommend it. I used 5 quarts of paint and 3 quarts of transparent coating.

If you don't have much to cover, 4 quarts of paint is enough.

  • Description:Dupli-Color EBSP30000 Clear Coat Paint Shop Finish System - 32 oz., Clear Gloss
  • Brand:Dupli-Color
  • Item Weight:2.3 pounds
  • Product Dimensions:4.25 x 4.25 x 4.88 inches
  • Manufacturer Part Number:BSP300
  • OEM Part Number:BSP300

Features

  • No need to mix or restore
  • Pre-reduction namely spray painting
  • Sand that gets wet easily
  • No reset window and can be reapplied at any time
  • Ideal choice for automobile exterior body project
  • Easy to smear and dry quickly
  • A transparent coating must be applied.
  • See more on Amazon...

#6 Rust Bullet Automotive Inhibitor Metallic

I use this material on the rusty floor of my 76 GMC pickup. I experienced a learning curve because it is a very unique product. I read all the instructions. One thing I had to deal with was not in the manual, and that was our recent heat and humidity in eastern Tennessee.

This product is an ideal choice for rusty surfaces. Soaking the first coating in the metal actually increases its strength, so when you put on the second coating, you get a thicker sealed antirust metal. I gave it four stars for two reasons: compared with all the rust converters and primers, it seems a little expensive; second, the shelf life of the product itself is very short.

I had some repair work to do before the main work, but then I had trouble taking the lid off the jar because these things, like glue, almost glued the lid on. I finally poured it into a plastic container with a screw cap, just like vitamins would come in & even so, it began to harden and the top became thicker, so I finally put the plastic bag under the lid, put the lid tightly, and put it in the fridge.

So I suggest using it again when it's not so muggy during the year. So the best way is to open the jar and use it on your project immediately. Before opening the main container, I should order a smaller jar to repair it.

I made the mistake of not wearing gloves for the first time & it took me a few days to take it off & you have to be careful not to get it on your car seat.

  • Description:RUST BULLET Automotive - Rust Inhibitor Rust Paint (Quart)
  • Brand:RUST BULLET
  • Model:RBA53
  • Item Weight:2.25 pounds
  • Product Dimensions:4 x 4 x 5 inches
  • Manufacturer Part Number:RBA
  • Folding:No
  • Cover Included:1 Quart Rust Bullet Automotive
  • Special Features:Rocker Panels, Frames, Floor Pans, Undercarriages, Suspension, And Much More

Features

  • Apply directly to the rusty surface-little or no preparation is required.
  • Obtain two US patents
  • UV resistance-no topcoat required-will not fade or crack
  • Smear with brush, scroll, or spray
  • One-step multi-layer painting process
  • Free of zinc, chromate or other heavy metals
  • See more on Amazon...

#7 Mixing Mate 10 090 Gallon Paint

I buy good quality tools and take good care of them, and the mixer is no exception, but if you don't use water-based paint, cleaning can be difficult. Some people complain that the seal is not good. However, some of my friends have the same complaint.

I find that they are not properly attached to the can. The four dogs used to fasten the mixture to the can must be pressed while turning. Then they have to rotate 180 degrees. Spring tension is the cause of compressing the foam seal to prevent any leakage.

You can't simply turn them 90 degrees and expect a good seal. For months, I have been using them to store paint without degradation or peeling off. One of the problems I noticed was that the plastic was a little brittle and would break if it fell or knocked over, especially on the nose of the nozzle.

This happened to me, and I didn't notice it, because the hole in the nozzle and the paint in the jar was dry. I've been using it for many years, and there's one on every jar. Even after a few months of storage, I can easily remove their paint (water; latex, for example).

All it needs is some warm water, dishwashing agent, a sink and (at worst) a Scottish Britt mat, but you must clean it as soon as you take it out of the can. Dry paint is very difficult, if not impossible to remove.

In addition, although the sliding nozzle cover is not obvious, it can be removed for cleaning by loosening the spring supporting it from under two plastic hooks and removing it. Finally, a drill bit is used to drive the nozzle cover.

  • Description:Mixing Mate 10-090 Gallon Size Paint Can Lid
  • Brand:Mixing Mate
  • Item Weight:1.3 pounds
  • Product Dimensions:11.5 x 9 x 6.25 inches
  • Color:One Color

Features

  • The tool-free cam clip securely fastens the mixing partner paint cover to any standard gallon size paint can-it can be firmly fastened to any standard gallon size paint can by tightening it.
  • The handle of the pistol makes it easy to paint and is ergonomic.
  • Cover washers to ensure that paint or finishing cans are tightly sealed and leak-proof.
  • Apply to any standard one-gallon can of paint, stain or varnish
  • After each pour, the spring nozzle is tightly sealed-put it on the shelf and drink it next time.
  • See more on Amazon...

#8 Dupli Color EMC100007 Ground Metal Anodized

This is a comment on the ground coating of the "metal castings" series. If you take the time to do it well, it will give you a good result. But I'd like to share with you what I found. I have used many kinds of rattle to spray paint.

This is the first mask I've ever used, and even if you spray it outdoors, you have to wear a mask. If you don't do this, it will do a lot of damage to your lungs.I tried. I didn't wear a respirator, and I regretted it immediately.

  • Description:Dupli-Color EMC100007 Ground Coat Metal Cast Anodized Color - 11 ounce
  • Brand:VHT
  • Model:MC100
  • Item Weight:14.4 ounces
  • Product Dimensions:2.61 x 2.61 x 8.2 inches
  • Manufacturer Part Number:MC100
  • OEM Part Number:MC100
  • Folding:No
  • Cover Included:Vehicle Accessories (AUTO_ACCESSORY),Appearance Chemicals, Paint Care, automotive-paint-sealers-and-protectants

Features

  • Metal castings are the answer to decorating your chromium and metal surfaces.
  • professional
  • It is used in both internal and external accessories, even in hot applications under the hood.
  • In order to achieve an anodized metal appearance on a non-metallic or paint surface, first use a heat-resistant, fast-drying MC 100primer.
  • See more on Amazon...

#9 TCP Thickness Viscosity Measuring Viscosimeter

TCP Thickness Viscosity Measuring Viscosimeter Cover

Purchased to use with the HVLP spray gun. It is helpful to be able to compare the concentration of your spray. I'm not sure how accurate it is, but I really don't care. I use it to compare what I've sprayed with a gun.

Some guns, I spray better at some times, so the liquid I spray will get better. Finally, I cut off the edge of the cup and bent one end of the handle perpendicular to the cup so that I could put it into the Mason jar.

The clay jar is where I stir. I think I cut off its edge with a razor blade and grind it smooth with sandpaper.

  • Description:TCP Global Brand SG244 Liquid Thickness & Viscosity Measuring Cup Ford # 4 Four, Viscosimeter to Measure Paint
  • Brand:Master Airbrush
  • Item Weight:0.81 ounces
  • Package Dimensions:3.3 x 2.6 x 2.3 inches
  • Color:Black
  • Finish:Cast

Features

  • CUP allows you to verify the viscosity of the coating before painting, so you can completely atomize the spray paint to help you achieve perfect polishing results.
  • The Ford # 4 cup is a portable device for quickly checking and measuring the viscosity or thickness of paints, varnishes, paints, stains, inks, syrups, liquids, etc.
  • The Ford viscosity cup is a simple gravity device that allows a known volume of liquid to flow regularly through an orifice at the bottom.
  • In order to determine the viscosity of the liquid, the cup needs to be soaked and completely filled with the substance.
  • After lifting the cup from the substance, the user measures the rupture time of the liquid flowing out of the cup, which is the corresponding "discharge time".
  • See more on Amazon...

#10 Dupli Color EMC200007 Metal Anodized Color

For those who are not familiar with the product, here are some tips and clarifications. However, want to get decent results! The metal casting lineup is essentially a "transparent" paint. It is like a dye or toner, often called candy paint.

Therefore, the background color, (starting) color, texture are important-because it becomes part of the final appearance. Since this paint is basically a transparent color, it essentially colors anything you want to paint. I have successfully colored the raw sand aluminum parts to achieve the "anodizing effect". However, in order to achieve a consistent / uniform anodizing effect on most projects, it is best to paint your parts with "grinding" products, as this is a metal / silver spot paint.

Tip: a lot of thin coating! I can't emphasize the importance of wearing only a thin coat, let it dry, and then repeat. We often want to put down the paint all at once-resist this impulse! First of all, no matter how smooth you are, the nozzles will not evenly arrange the fur.

So forcing yourself to put down a lot of clothes will actually help you get a more uniform average coverage-which is a good thing. Second, the rapid drying of aerosol propellants cools the components, which means that if laid too much at a time, it will attract more moisture (condensation), resulting in cloud / milky defects.

Again, avoid this by keeping the fur very thin at once, let it dry, and then warm it separately. One thing is good, thin coats will soon come off (dry), so.

  • Description:Dupli-Color MC200 Red Metal Cast Anodized Color - 11 oz.
  • Brand:Dupli-Color
  • Model:RED ANODIZED
  • Item Weight:15.2 ounces
  • Product Dimensions:2.61 x 2.61 x 8.2 inches
  • Manufacturer Part Number:MC200
  • OEM Part Number:MC200
  • Folding:No
  • Cover Included:RED ANODIZED

Features

  • High gloss
  • Anodizing color effect
  • This product is not for sale on Catalina Island.
  • Intermittent resistance to 500 degrees Fahrenheit
  • EZ touch fan nozzle
  • See more on Amazon...

Product Compare

# TOP 1-POR 15 45404 Gloss Black Preventive 2-Dupli Color EHVP10600 Black Performance Fabric 3-Dupli Color EPS100000 Grease Remover Spray 4-Genuine Toyota 00258 00070 21 White Touch Up 5-Dupli Color EBSP30000 Clear Finish System 6-Rust Bullet Automotive Inhibitor Metallic 7-Mixing Mate 10 090 Gallon Paint 8-Dupli Color EMC100007 Ground Metal Anodized 9-TCP Thickness Viscosity Measuring Viscosimeter 10-Dupli Color EMC200007 Metal Anodized Color
Product POR 15 45404 Gloss Black Preventive Thumbnail Dupli Color EHVP10600 Black Performance Fabric Thumbnail Dupli Color EPS100000 Grease Remover Spray Thumbnail Genuine Toyota 00258 00070 21 White Touch Up Thumbnail Dupli Color EBSP30000 Clear Finish System Thumbnail Rust Bullet Automotive Inhibitor Metallic Thumbnail Mixing Mate 10 090 Gallon Paint Thumbnail Dupli Color EMC100007 Ground Metal Anodized Thumbnail TCP Thickness Viscosity Measuring Viscosimeter Thumbnail Dupli Color EMC200007 Metal Anodized Color Thumbnail
Customer Reviews
(2456)
(1251)
(242)
(254)
(759)
(352)
(265)
(116)
(111)
(776)
Model 45404 - PS100 00258-00070-21 - RBA53 - MC100 - RED ANODIZED
Item Weight 2.4 pounds 15.4 ounces 15.2 ounces 0.8 ounces 2.3 pounds 2.25 pounds 1.3 pounds 14.4 ounces 0.81 ounces 15.2 ounces
Product Dimensions 4.25 x 4.25 x 5 inches 2.61 x 2.61 x 7.95 inches 2.61 x 2.61 x 8.2 inches - 4.25 x 4.25 x 4.88 inches 4 x 4 x 5 inches 11.5 x 9 x 6.25 inches 2.61 x 2.61 x 8.2 inches - 2.61 x 2.61 x 8.2 inches
Manufacturer Part Number 45404 HVP106 PS100 00258-00070-21 BSP300 RBA - MC100 - MC200
OEM Part Number Consumer Commodity, ORM-D HVP106 PS100 - BSP300 - - MC100 - MC200
Folding - - - -
Cover Included 1 Can Auto part, Automotive Accessories, Replacement and Perf... Vehicle Accessories (AUTO_ACCESSORY),Appearance Chemica... Genuine Toyota Parts - White Pearl (00258-00070-21) - 1 Quart Rust Bullet Automotive - Vehicle Accessories (AUTO_ACCESSORY),Appearance Chemica... - RED ANODIZED
Support Prime
Price $45.48 $13.38 $13.76 $12.49 $22.99 $34.04 $24.99 $14.23 $11.96 $14.01
View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon View On Amazon

Related topics

Top